Search
GRACO INC. S10595
GRACO INC. S10595 branded products
Adapter, Straight, 1/4 NPT x 7/8-14 JIC
GG 116702
GG 116702
Adapter, Straight, 1/4 NPT x 7/8-14 JIC
$433.00
Conductor, Temperature, w/Connector Obsolete
GG 15K034
GG 15K034
Conductor, Temperature, w/Connector
$135.50
Bracket, Mounting, Lvdt, Magnet Obsolete
GG 15T389
GG 15T389
Bracket, Mounting, Lvdt, Magnet
$245.00
Trabon® MXP Divider Valve - 4 Section Tie Rod (3 Required)
GG 557767
GG 557767
ROD, TIE, MXP, 4 SECTION
Graco 557767 Trabon MXP Divider Valve - 4 Section Tie Rod (3 Required)
Application: For use with Trabon MXP Divider Valves.- 4-Section Tie Rod
- Three required per assembly
- Lubriquip part number 527-300-280
- Model: Trabon
- Series: MXP
- Application: In-Plant Machinery
$23.40
rabon MXP Modular Divider Valve - MXP-25T - 0.025 in cu (0.41 cm cu) Sold in Multiplies of Two
GG 562813
GG 562813
MXP VALVE, TWIN 25T
Graco 562813 Trabon MXP Modular Divider Valve - MXP-25T - 0.025 in cu (0.41 cm cu )
The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.
Application: Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements.- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Robust design is virtually indestructible and built to perform in extreme environments
- Model: Trabon
- Series: MXP
- Application: Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in cu ): 0.025
- Divider Valve Series: MXP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature ( degree C): 176
- Maximum Operating Temperature ( degree F): 350
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Working Pressure (psi): 200
- Number of Outlets: 2
$237.00
Husky 2150 AL 2 in. (51 mm) NPT Standard Pump, AL Center Section, SS Seats, Hardened Steel Balls & PTFE Diaphragm
GG DF3341
GG DF3341
HUSKY PUMP, 2150A-PA01AA1SSSDPTPT
Graco DF3341 Husky 2150 AL 2 in. (51 mm) NPT Standard Pump, AL Center Section, SS Seats, Hardened Steel Balls & PTFE Diaphragm
The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
- Overall improved efficiency (up to 40% more efficient)
- Highest fluid flow rate in its class
- Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
- Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
- 2 in. (51 mm) ANSI end-porting
- Fluid flow up to 150 gpm (568 lpm)
- Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
- Lube-free operation
- Epoxy-coated air section for tough environmental conditions
- Available in aluminum, 316 stainless steel, ductile iron and polypropylene
- Model: Husky
- Series: 2150
- Air Exhaust Port Size (in): 3/4
- Air Exhaust Port Thread Gender: Female
- Air Exhaust Port Thread Type: NPT
- Air Inlet Size (in): 1/2
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Ball Material: 440C Stainless Steel
- Center Section Material: Aluminum
- Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Water - Wastewater Transfer
- Connection Type: Threaded
- Diaphragm Compatible Material: PTFE
- Diaphragm Material: PTFE/EPDM 2-Piece
- Fluid Inlet Size (cm): 5.08
- Fluid Inlet Size (in): 2
- Fluid Inlet Size (mm): 50.8
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 5.08
- Fluid Outlet Size (in): 2
- Fluid Outlet Size (mm): 50.8
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Fluid Section Material: Aluminum
- Manifold Configuration: End Port
- Manifold O-Ring Material: PTFE
- Material: Aluminum
- Maximum Air Consumption (SCFM): 175
- Maximum Air Pressure (bar): 8
- Maximum Air Pressure (kPa): 800
- Maximum Air Pressure (MPa): 0.8
- Maximum Air Pressure (psi): 120
- Maximum Cycle Rate (CPM): 145
- Maximum Flow Rate (GPM): 150
- Maximum Flow Rate (L/min): 568
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Fluid Pressure (bar): 8
- Maximum Fluid Pressure (kPa): 800
- Maximum Fluid Pressure (MPa): 0.8
- Maximum Fluid Pressure (psi): 120
- Maximum Operating Temperature ( degree C): 93
- Maximum Operating Temperature ( degree F): 200
- Maximum Solid Size (cm): 0.635
- Maximum Solid Size (in): 0.25
- Maximum Solid Size (mm): 6.35
- Power Source: Air
$4,760.00
Fitting, Elbow, Swivel, 45, JIC08, FM, 6K
GG 123528
GG 123528
Fitting, Elbow, Swivel, 45, JIC08, FM, 6K
$46.50
Payment options
