Airpower | CLECO S10555 branded products

AX 22MM15

SCKT 1/2 SQ DR 22MM HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.339 lb
Diameter Drive End (C): 33.3 mm
Diameter Nose End (B): 33.3 mm

Hex Opening: 22 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 14.3 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$38.08

3/4 Sq. Drive Socket X 22mm 6 Pt Hex

AX 22MM17

SCKT 3/4 SQ DR 22MM HEX 50.8MM OAL
3/4" Drive - Metric - 6 Point & Surface Drive, Standard and Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Weight: 0.625 lb
Diameter Drive End (C): 38.1 mm
Diameter Nose End (B): 38.1 mm

Hex Opening: 22 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 14.3 mm
Opening Modifier: 6 Point Hex

Overall Length A: 51 mm
Set: No

$61.63

3/8 Sq. Drive Socket X 22mm 6 Pt Hex

AX 22MM23

SCKT 3/8 SQ DR 22MM HEX 50.8MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.399 lb
Diameter Drive End (C): 31.7 mm
Diameter Nose End (B): 31.7 mm

Hex Opening: 22 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 14.3 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$36.89

1/2 Sq. Drive Socket X 24mm 6 Pt Hex

AX 24MM15

SCKT 1/2 SQ DR 24MM HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.376 lb
Diameter Drive End (C): 34.9 mm
Diameter Nose End (B): 34.9 mm

Hex Opening: 24 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$48.37

3/4 Sq Drive Socket X 24mm 6 Point

AX 24MM17

SCKT 3/4 SQ DR 24MM HEX 50.8MM OAL
3/4" Drive - Metric - 6 Point & Surface Drive, Standard and Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Weight: 0.580 lb
Diameter Drive End (C): 38.1 mm
Diameter Nose End (B): 38.1 mm

Hex Opening: 24 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 51 mm
Set: No

$50.07

1/2 Sq. Drive Socket X 24mm 6 Pt Hex

AX 24MM25

SCKT 1/2 SQ DR 24MM HEX 57.2MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.539 lb
Diameter Drive End (C): 34.9 mm
Diameter Nose End (B): 34.9 mm

Hex Opening: 24 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 57.1 mm
Set: No

$56.10

AX 27MM17

SCKT 3/4 SQ DR 27MM HEX 50.8MM OAL
3/4" Drive - Metric - 6 Point & Surface Drive, Standard and Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Thin Wall

Weight: 0.112 lb
Diameter Drive End (C): 44.4 mm
Diameter Nose End (B): 44.4 mm

Hex Opening: 27 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 17.5 mm
Opening Modifier: 6 Point Hex

Overall Length A: 51 mm
Set: No

$141.53

1/4 Hex Power Drive Bit X #8 Torq-Set

AX 273-8

BIT 1/4 HEX PWRDR #8 T-SET 1-15/16 inch 49MM
1/4 inch Hex Power Drive - Torq-Set Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Weight: 0.024 lb

Drive: Hex Power Drive
Fastener Type: Torq-Set

Overall Length: 1.93 in, 49.0 mm
Point Size: 8
Set: No
SKU Group Note: Torq-Set, ACR and Tri-Wing are registered trademarks of the Phillips Screw Company.

$22.22

1/4 Hex Power Drive Bit X #10 Torq-Set

AX 273B-10

BIT 1/4HEX PWRDR #10TORQ-SET 2-3/4 inch 70MM
1/4 inch Hex Power Drive - Torq-Set Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Weight: 0.035 lb

Drive: Hex Power Drive
Fastener Type: Torq-Set

Overall Length: 2.75 in, 70.0 mm
Point Size: 10
Set: No
SKU Group Note: Torq-Set, ACR and Tri-Wing are registered trademarks of the Phillips Screw Company.

$25.18

3/8 Sq. Drive Socket X 3/8 6 Pt Hex

AX 3012

SCKT 3/8 SQ DR 3/8 HEX 7/8 OAL
3/8" Drive - SAE - 6 Point & Double Hex, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Weight: 0.028 kg
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 19/32 in

Hex Opening: 3/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$19.58

3/8 Sq. Drive Socket X 5/16 6 Pt Hex

AX 3010

SCKT 3/8 SQ DR 5/16 HEX 7/8 OAL
3/8" Drive - SAE - 6 Point & Double Hex, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Weight: 0.027 kg
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$23.61

1/4 Hex Power Drive Bit X #8 Torq-Set

AX 273B-8

BIT 1/4HEX PWRDR #8 TORQ-SET 2-3/4 inch 70MM
1/4 inch Hex Power Drive - Torq-Set Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torq-Set is a registered trademark of the Phillips Screw Company.

Weight: 0.027 lb

Drive: Hex Power Drive
Fastener Type: Torq-Set

Overall Length: 2.75 in, 70.0 mm
Point Size: 8
Set: No
SKU Group Note: Torq-Set, ACR and Tri-Wing are registered trademarks of the Phillips Screw Company.

$25.10

AX 25MM15

SCKT 1/2 SQ DR 25MM HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.498 lb
Diameter Drive End (C): 38.1 mm
Diameter Nose End (B): 38.1 mm

Hex Opening: 25 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$50.58

3/8 Sq. Drive Socket X 1/2 6 Pt Hex

AX 3016

SCKT 3/8" SQ DR 1/2" HEX 7/8" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Weight: 0.077 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 13/16 in

Hex Opening: 1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$23.78

3/8 Sq. Drive Socket X 9/16 6 Pt Hex

AX 3018

SCKT 3/8 SQ DR 9/16 HEX 7/8 OAL
3/8" Drive - SAE - 6 Point & Double Hex, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Weight: 0.040 kg
Diameter Drive End (C): 7/8 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$23.59

3/8 Sq. Drive Socket X 3/4 6 Pt Hex

AX 3024

SCKT 3/8 SQ DR 3/4 HEX 1" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
HC-3520 is spark plug socket.

Weight: 0.001 kg
Diameter Drive End (C): 1-1/16 in
Diameter Nose End (B): 1-1/16 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$37.32

3/8 Sq. Drive Socket X 10mm 6 Pt. Hex

AX SF-10MM33

SCKT 3/8 SQ DR 10MM SF-HEX 88.9MM OAL
3/8" Drive - Metric - Surface Drive, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.308 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Surface Drive

Overall Length A: 88.9 mm
Set: No

$37.74

Tap Holder 10MM Male Hex Drive for M6 Tap, 24MM OAL

AX SJ-935-10MXM6

TAPHLDR 10MM MALEHXDR FOR M6TAP 24MM OAL
Male Hex Drive, Metric

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.049 lb

Male Hex Size: 10 mm

Set: No

$71.23

Tap Holder 12MM Male Hex Drive for M8 Tap, 29MM OAL

AX SJ-935-12MXM8

TAPHLDR 12MM MALEHXDR FOR M8TAP 29MM OAL
Male Hex Drive, Metric

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.050 lb

Male Hex Size: 12 mm

Set: No

$74.80

Tap Holder 14MM Male Hex Drive for M10 Tap, 25MM OAL

AX SJ-935-14MXM10

TAP HLDR 14MM M HEXDR F/M10 TAP 25MM OAL
Male Hex Drive, Metric

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.058 lb

Male Hex Size: 14 mm

Set: No

$81.52

Tap Holder 14MM Male Hex Drive for M8 Tap, 25MM OAL

AX SJ-935-14MXM8

Tap Holder 14MM Male Hex Drive for M8 Tap, 25MM OAL

$107.19

AX SZ-10-17MM

Bit 5/8 Hex INS 17M Hex

$33.07

5/8 Hex Insert X T-80 Torx Bit TH, 25/Minimum

AX SZ-TX-80-A

BIT 5/8 HEX INS T-80 TX 1-9/16" 40MM OAL
5/8" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
DP-Drill Point, TH-Thru Hole. 5/8" insert bits are used with SC and RP adapters Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
DP-Drill Point, TH-Thru Hole. 5/8" insert bits are used with SC and RP adapters Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.058 lb

Drive: Hex Insert
Drive Size: T-80
Fastener Type: Torx

Hex Flat Type: TH

Measurement Across Lobes: .689 in

Overall Length: 1.56 in, 40.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$63.16

3/8 Sq Drive External Torx Socket X E-10

AX TX-3410

SCKT 3/8 SQ DR E10 TORX 1-1/4 OAL
3/8" Drive - Torx - For External Torx Screws, Thin Wall, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Weight: 0.052 lb
Diameter Drive End (C): 5/8 in, 16 mm
Diameter Nose End (B): 1/2 in, 13 mm

Driver Size: E-10

Magnetism: Non-Magnetic

Opening Modifier: Torx

Overall Length A: 1-1/4 in, 32 mm
Set: No

$22.53

U-Guard Socket 1/2 Sq Dr x 15 MM Hex

AX UG-15MM25

SCKT CVRD 1/2 SQ DR 15MM HEX 57.9MM OAL
1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets

Weight: 0.161 lb

Drive End Sex: F
Drive End Type: Square
Drive Size: 1/2 in
Fastener End Sex: F
Fastener End Size: 15 mm
Fastener End Type: Hex

Magnetism: Non-Magnetic

Metal Socket Number: 15MM25
Opening Modifier: 6 Point Hex

Set: No

$92.99

Socket 1/2 SQ DR, E10 Tor X 1-1/2 OAL

AX TX-5410

SCKT 1/2 SQ DR E10 TORX 1-1/2" OAL
1/2" Drive - Torx - For External Torx Screws, Thin Wall

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.115 lb
Diameter Drive End (C): 7/8 in, 22 mm
Diameter Nose End (B): 1/2 in, 13 mm

Driver Size: E-10

Magnetism: Non-Magnetic

Opening Modifier: Torx

Overall Length A: 1-1/2 in, 38 mm
Set: No

$35.19

U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm

AX UG-3214

U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm

$74.97

U-Gurard Socket 3/8 Sq Dr 1/2 Hex

AX UG-3216

U-Gurard Socket 3/8 Sq Dr 1/2 Hex

$89.08

1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min

AX UG-5222

1/2 Sq Drv 11/16 FM Hex U-Guard CVR, 12/Min

$115.94

Adapter, Covered, Sq Dr 1/2, 3/8 Sq, 8 Oal

AX UG-EX-377-8

Adapter, Covered, Sq Dr 1/2, 3/8 Sq, 8 Oal

$144.16

Socket, U-Guard, 3/8 SQ DR 12MM HEX 51MM OAL MB

AX UG-MB-12MM23

SCKT CVRD 3/8 SQ DR 12MM HEX 51MM OAL MB
3/8" Drive Metric u-GUARD Magnetic Covered Sockets

Weight: 0.140 lb

Drive End Sex: F
Drive End Type: Square
Drive Size: 3/8 in
Fastener End Sex: F
Fastener End Size: 12 mm
Fastener End Type: Hex

Magnetism: Magnetic

Metal Socket Number: MB-12MM23
Opening Modifier: 6 Point HEx

Set: No

$96.56

Mag Bit Holder, U-Guard Covered 1/2 SQ DR 5/16 HEX

AX UG-M-855

Mag Bit Holder, U-Guard Covered 1/2 SQ DR 5/16 HEX

$128.52

EXT CVRD 1/2 SQ DR 1/2 SQ 3" OAL

AX UG-EX-508-3

EXT CVRD 1/2 SQ DR 1/2 SQ 3" OAL

$115.77

1/4 Hex Insert Bit X #2 Phillips X 1

AX 440-27X

BIT 1/4 HEX INS #27 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb
Description: For shallow screw recesses

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.37

1/4 Hex Insert X #2 Phillips X 1 w/ACR

AX 440-2-ACR2X

BIT 1/4 HEX INS #2 PH ACR 1" 25MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.73

1/4 Phillips #2 Hex Insert Bits w/ ACR

AX 440-2-ACR2-RI

BIT 1/4 HEX INS #2 PH ACR-R 1" 25MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.73

1/4 Pozidriv Hex Insert X #2 Pt X 1

AX 440-2-PZDX

BIT 1/4 HEX INS #2 POZIDRIV 1" 25MM OAL
1/4" Hex Insert Bits - Pozidriv Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pozidriv is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pozidriv is a registered trademark of the Phillips Screw Company.

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Pozidriv

Long Description: 1/4", Hex Insert Bits

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$1.44

1/4 Hex Insert Bit X #2 Phillips X 1

AX 440-2X

BIT 1/4 HEX INS #2 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.12

Bit 1/4 Hex Ins, 30IP , 1 Inch Long

AX 440-30IPX

BIT 1/4 HEX INS 30IP TXPLS 1" 25MM OAL
1/4" Hex Insert Bits - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.013 lb

Drive: Hex Insert
Drive Size: 30IP
Fastener Type: Torx Plus

Measurement Across Lobes: .216 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

$6.17

1/4 Hex Insert Bit X T-20 Torx Hex X 1

AX 440-TX-20X

BIT 1/4 HEX INS T20 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

1/4 Hex Bit, Torx Bit T20, 2 Long

AX 440-TX-20-2

BIT 1/4 HEX INS T20 TORX 2" 51MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.026 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 2.0 in, 51.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.54

1/4 Hex Insert Bit X T-25 Torx Hex X 1

AX 440-TX-25X

BIT 1/4 HEX INS T25 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25
Fastener Type: Torx

Long Description: 1/4", Hex Insert Bits

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

1/4 Hex Insert Bit X T-05 Torx Hex X 1

AX 440-TX-05X

BIT 1/4 HEX INS T5 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-5
Fastener Type: Torx

Measurement Across Lobes: .055 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.30

1/4 Hex Insert X #3 Phillips X 2-1/2

AX 440-325X

BIT 1/4 HEX INS #3 PH 2-1/2" 64MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.035 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.5 in, 64.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.58

1/4 Hex Insert Bit X T-15 Torx Hex x 1

AX 440-TX-15X

BIT 1/4 HEX INS T15 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.02

1/4 Hex Insert X #00 MorTorq Bit X 1

AX 440-MT-00

BIT 1/4 HEX INS #00 MORTORQ 1" 25MM OAL
MorTorq Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Other drive sizes/types and point sizes can be quoted. Contact your Apex Distributor or Representative for more information. Mortorq is a registered trademark of Phillips Screw Company.

Weight: 0.010 lb

Drive: Hex Insert
Drive Size: 1/4 in - Hex Insert
Fastener Type: MorTorq

MorTorq Size: 00

Overall Length: 1.0 in, 25.0 mm
Set: No

$16.22

1/4 Hex Insert X #3 Phillips X 3

AX 440-33X

BIT 1/4 HEX INS #3 PH 3" 76MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.042 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 3.0 in, 76.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.75

1/4 Hex Insert Bit X T-27-H Torx Hex(TR)

AX 440-TX-27-H

BIT 1/4 HEX INS T27 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-27-H
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$8.56

1/4in Hex Insert by T-20

AX 440-TX-20-125

BIT 1/4 HEX INS T20 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Insert
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.88

1/4 Hex Insert Bit X T-15-H Torx Hex(TR)

AX 440-TX-15-H

BIT 1/4 HEX INS T15 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-15-H
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$8.56

1/4 Hex Insert Bit X T-40 Torx Hex X 1

AX 440-TX-40X

BIT 1/4 HEX INSERT T40 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Insert
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

1/4 Hex Insert X #3 Phillips X 2

AX 440-32X

BIT 1/4 HEX INS #3 PH 2" 51MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.027 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 2.0 in, 51.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.61

1/4 Hex Insert X #3 Pt Phillips X 1

AX 440-3X

BIT 1/4 HEX INS #3 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 3
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.12

1/4 Hex Insert Bit X T-45 Torx X 1-1/4

AX 440-TX-45X

BIT 1/4 HEX INS T45 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$6.59

1/4 Hex Slotted Insert X 3F-4R X 1

AX 445-0X

BIT 1/4 HEX INS 3F-4R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .030 in
Blade Width: 0.154 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 3F-4R
Set: No

$3.03

1/4 Hex Insert Bit X T-25-H Torx Hex(TR)

AX 440-TX-25-H

BIT 1/4 HEX INS T25 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-25-H
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$8.56

1/4 Hex Slotted Insert X 1F-2R X 1

AX 445-000X

BIT 1/4 HEX INS 1F-2R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.010 lb
Blade Width: 0.125 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4" Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 1F-2R
Set: No

$2.98

1/4 Hex Insert Bit X T-08-H Torx (TR)

AX 440-TX-08-H

BIT 1/4 HEX INS T8 TORX 1 inch 25MM OAL
1/4 inch Hex Insert Bits -Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx screws feature a post in the center of the recess-this post will only fit into a tamper resistant Torx bit. Tamper resistant Torx bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-8-H
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.02

1/4 Hex Insert Bit X T-50 Torx X 1 1/4

AX 440-TX-50X

BIT 1/4 HEX INS T50 TORX 1-1/4" 32MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.027 lb

Drive: Hex Insert
Drive Size: T-50
Fastener Type: Torx

Measurement Across Lobes: .346 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.21

1/4 Hex Insert Bit X T-30 Torx Hex X 1

AX 440-TX-30X

BIT 1/4 HEX INS T30 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.013 lb

Drive: Hex Insert
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

1/4 Hex Insert X #4Pt Phillips X 1-5/16

AX 440-4X

BIT 1/4 HEX INS #4 PH 1-5/16" 33MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 7.658 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.31 in, 33.0 mm
Point Size: 4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$4.01

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-10X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb
Blade Thickness: .034 in
Blade Width: 0.185 in

Drive: Hex Insert
Fastener Type: Slotted

Long Description: 1/4", Hex Insert Bits - Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$4.28

1/4 Hex Slotted Insert X 4F-5R X 1

AX 445-1X

BIT 1/4 HEX INS 4F-5R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.19 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 4F-5R
Set: No

$2.69

1/4 Hex Slotted Insert X 5F-6R X 1 1/2

AX 445-20-15X

BIT 1/4 HEX INS 5F-6R SLOT 1-1/2" 38MM
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.015 lb
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.5 in, 38.0 mm
Screw Size: 5F-6R
Set: No

$4.28

1/4 Hex Slotted Insert X 5F-6R X 1

AX 445-20X

BIT 1/4 HEX INS 5F-6R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.012 lb
Blade Thickness: .036 in
Blade Width: 0.216 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 5F-6R
Set: No

$4.28

1/4 Hex Slotted Insert X 8F-10R X 1

AX 445-3X

BIT 1/4 HEX INS 8F-10R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.25 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 8F-10R
Set: No

$3.92

1/4 Hex Slotted Insert X 6F-8R X 1

AX 445-2X

BIT 1/4 HEX INS 6F-8R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.22 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 6F-8R
Set: No

$2.56

1/4 Hex Slotted Insert X 10F-12R X 1

AX 445-4X

BIT 1/4 HEX INS 10F-12R SLOT 1" 25MM OAL
1/4" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.013 lb
Blade Width: 0.28 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.0 in, 25.0 mm
Screw Size: 10F-12R
Set: No

$3.92

1/4 Hex Insert Bit X #0 Phillips X 1, 25mm OAL, 25/Min

AX 446-0I

1/4 Hex Insert Bit X #0 Phillips X 1, 25mm OAL, 25/Min

$8.28

1/4 Hex Insert Bit x #0 Phillips x 1, 25 mm Oal

AX 446-0X

BIT 1/4 HEX INS #0 PH 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Phillips

Long Description: 1/4", Hex Insert Bits-Limited Clearance

Overall Length: 1.0 in, 25.0 mm
Point Size: 0
Screw Size: 0,1
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.06

1/4 Hex Insert Bit X #1 Phillips X 1

AX 446-1X

BIT 1/4 HEX INS #1 PH 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.010 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 1
Screw Size: 2,3,4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.31

1/4 Hex Insert Bit X #2 Phillips X 3

AX 446-23T

BIT 1/4 HEX INS #2 PH 3" 76MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.027 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 3.0 in, 76.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.37

Bit, 1/4 Hex Drive Insert 2 Phillips

AX 446-2-ACR2X

BIT 1/4 HEX INS #2 PH ACR 1" 25MM OAL
1/4" Hex Insert Bits - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque
Part number suffix -R, For removal. Part number suffix -D, For driving. No part number suffix - For both removal and driving.

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$3.04

BIT 1/4 HEX DRV INSERT # 2. P

AX 446-215T

BIT 1/4 HEX INS #2 PH 1-1/2" 38MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.014 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.5 in, 38.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.45

5/16 Hex Insert X #1 Phillips X 1-1/4

AX 480-1X

BIT 5/16 HEX INS #1 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.022 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 1
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.41

1/4 Hex Insert Bit X T-10 Torq Hex X 1

AX 440-TX-10X

BIT 1/4 HEX INS T10 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.011 lb

Drive: Hex Insert
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.02

1/4 Hex Insert Bit X T-27 Torx Hex X 1

AX 440-TX-27X

BIT 1/4 HEX INS T27 TORX 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Hex will break before rated ultimate torque of the Torx point is met. Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.012 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$4.07

5/16 Hex Insert X #4 Phillips X 1-1/4

AX 480-4X

BIT 5/16 HEX INS #4 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.025 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 4
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.48

1/4in Hex Bit

AX 446-22T-PZDX

1/4in Hex Bit

$9.56

5/16 Hex Insert, T-25

AX 480-TX-25X

BIT 5/16 HEX INS T-25 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

BIT 5/16 HEX DRV INSERT # 2.

AX 480-2X

BIT 5/16 HEX INS #2 PH 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.023 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.25 in, 32.0 mm
Screw Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.19

5/16 Hex Insert X T-30 Torx Hex X 1-1/4

AX 480-TX-30X

BIT 5/16 HEX INS T-30 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.023 lb

Drive: Hex Insert
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

1/4in Hex Insert

AX 446-3X

BIT 1/4 HEX INS #3 PHILLIPS 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 3
Screw Size: 12,14
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$2.77

5/16 Hex Insert X T-40 Torx Hex X 1-1/4

AX 480-TX-40X

BIT 5/16 HEX INS T-40 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.025 lb

Drive: Hex Insert
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.27

Bit, M6, 5/16 Hex, L=25mm

AX 480-TSQ-6M

BIT 5/16 HEX INS 6MM TRIPSQ 1-1/4" 32MM
5/16" Hex Insert Bits - Triple Square Bits

Weight: 0.024 lb

Drive: Hex Insert
Fastener Type: Triple Square

Overall Length: 1.25 in, 32.0 mm
Point Size: 6mm
Set: No

$30.60

5/16 Hex Insert, T-27

AX 480-TX-27X

BIT 5/16 INSERT T27 TORX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Insert
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.32

5/16 Hex Insert X T-45-H Torx Hex (TR)*

AX 480-TX-45-H

BIT 5/16 HEX INS T-45 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Tamper Resistant - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.026 lb

Drive: Hex Insert
Drive Size: T-45-H
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.55

6.32 X 1/8 Set Screw

AX 4502840376

6.32 X 1/8 Set Screw

$0.85

7/16 Hex Drive Bit Holder X 1/4 Hex

AX 488

BIT HLDR 7/16 HEX DR 1/4 HEX 2 3/4 OAL
7/16" Hex Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.108 lb
Description: For 1/4" hex inserts

Drive: Hex Drive

Magnetism: Non-Magnetic

Overall Length: 2.75 in, 70.0 mm
Set: No

$19.81

5/16 Hex Insert X T-45 Torx Hex X 1-1/4

AX 480-TX-45X

BIT 5/16 HEX INS T-45 TX 1-1/4" 32MM OAL
5/16" Hex Insert Bits - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.027 lb

Drive: Hex Insert
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$5.95

1/4 Phillips #0 Hex Power Drive Bit

AX 4910-AX

BIT 1/4 HEX PWR DR #0 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.016 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Screw Size: 0
Set: No

$3.52

1/4 Hex Drive X #2 Phillips X 2-3/4

AX 492-AX

BIT 1/4 HEX PWR DR #2 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.033 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 2
Set: No

$2.54

Bit, 1/4 Hex Pwr Dr #27 PH, 1-15/16, 49MM

AX 492-27X

BIT 1/4 HEX PWR DR #27 PH 1-15/16" 49MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.026 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No

$2.48

5/16 Hex Slotted InsertX 10F-14R X1-1/2

AX 485-5X

BIT 5/16HEX INS 12F-14R SLOT 1-1/2" 38MM
5/16" Hex Insert Bits - Slotted Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.032 lb
Blade Width: 0.328 in

Drive: Hex Insert
Fastener Type: Slotted

Overall Length: 1.5 in, 38.0 mm
Screw Size: 12F-14R
Set: No

$4.76

Torx Bit, 7/16 Hex Power Drive, T-45

AX 48-TX-45

BIT 7/16 HEX PWR DR T45 TORX 3-1/2" 89MM
7/16" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.101 lb

Drive: Hex Power Drive
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .306 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$32.05

1/4 Hex Drive X #1 Phillips X 2-3/4

AX 491-AX

BIT 1/4 HEX PWR DR #1 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.024 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 1
Set: No

$2.92

1/4 Hex Drive X #3 Phillips X 2-3/4

AX 493-AX

BIT 1/4 HEX PWR DR #3 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.046 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 3
Set: No

$2.58

1/4 Hex Drive X #2 Phillips X 6

AX 492-CCX

BIT 1/4 HEX PWR DR #2 PH 6" 152MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.076 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 6.0 in, 152.0 mm
Point Size: 2
Set: No

$7.74

1/4 Hex Power DriveX Frearson X 6

AX 492-CFX

BIT 1/4 HEX PWR DR #2 FREAR 6 inch 152MM OAL
1/4 inch Hex Power Drive - Frearson Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter - the larger the screw, the larger the body diameter.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter - the larger the screw, the larger the body diameter.

Weight: 0.456 lb

Drive: Hex Power Drive
Fastener Type: Frearson

Overall Length: 6.0 in, 152.0 mm
Screw Size: All
Set: No

$9.89

1/4 Hex Insert Bit X #2 Phillips X 1

AX 446-2X

BIT 1/4 HEX INS #2 PH 1" 25MM OAL
1/4" Hex Insert Bits - Limited Clearance - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Reduced Diamater Nose for Limited Clearance Applications

Weight: 0.011 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Screw Size: 5,6,7,8,10
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.23