Search
CLECO S10555
CLECO S10555 branded products
Ra Snd/Grd, Fe, 4.5K, Gov
DC 12L2762-80
DC 12L2762-80
RA SND/GRD,FE,4.5K,GOV,5/8-11E850 - 11,000 RPM 0.9 hp (0.67 kW)
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 3.97 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
- Aluminum 10L and Composite 12L housing options
- High output motor for demanding sanding applications
- Heavy duty low profile head for superior durability
- Tool not supplied with backing pad as shown
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 3.97 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches
$1,208.30
RA SND/GRD, ERGO, RE, 14. 5, 4" TP27
DC 12L2778-84
DC 12L2778-84
RA SND/GRD, ERGO, RE, 14. 5, 4" TP27
$1,354.50
Router Guide
DC 14-2400
DC 14-2400
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
DRILL ANGLE, RE, 5K, 1/4-28I
DC 15LN281-62
DC 15LN281-62
DRILL ANGLE,RE,5K,1/4-28I0.9hp / 0.67kW 470-5600 rpm Ideal for Restricted Access Applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
- Wide array of speeds, head designs, and spindle threads for all applications
- High efficiency motor and geartrain
- -62 1/4in -28 Internal thread standard
- Other terminations available: -61 10-32 Internal Thread -63 Threaded Collet -64 5/16in -24 Internal Thread
- Lock off safety lever standard
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
$1,560.90
Cable, 3 Meter, w/ Swivel
CL 301904-3M
CL 301904-3M
CABLE, TOOL, INLINE SWIVEL, 3 METER- 3 Meter Inline Swivel Tool Cable
$4,054.05
3HP VERT GRD, 6K RPM, 6 CUP WHEEL GUARD
CL 3060AVL-06
CL 3060AVL-06
3HP VERT GRD, 6K RPM, 6" CUP WHEEL GUARD6,000 RPM 3.0 hp (2.3 kW)
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 10.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
- Powerful, governed motor
- Ideally suited for the most rugged enviornments
- Maximum material removal in an ergonomic package
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 10.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
$855.70
Grinder, Verticle, 3hp
CL 3060AVL-07
CL 3060AVL-07
3HP VERT GRD, 6KRPM, 7" GUARD6,000 RPM 3.0 hp (2.3 kW)
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 9.7 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
- Powerful, governed motor
- Ideally suited for the most rugged enviornments
- Maximum material removal in an ergonomic package
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 9.7 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
$829.90
Grinder, Verticle, 3hp, 9in Guard
CL 3060AVL-09
CL 3060AVL-09
3HP VERT GRD, 6KRPM, 9" GUARD6,000 RPM 3.0 hp (2.3 kW)
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 10.4 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
- Powerful, governed motor
- Ideally suited for the most rugged enviornments
- Maximum material removal in an ergonomic package
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 10.4 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
$855.70
30 Series Nutsetter AH-6.7NM
CL 30EAN06EA3
CL 30EAN06EA3
NUTSTR, 30 SERIES AH - 6.7NM1 million cycles maintenance free and customizable features to fit any application. Light weight and ergonomic design for applications up to 205 Nm.
Weight (lbs): 2.5 lb
- 30 Series Low torque applications, 50 Series High torque applications
- 1.3 Nm to 205 Nm Torque range
- 3/8, 1/2, 3/4 square output drive
- Engineered to provide 1 million cycles maintenance-free
- Repeatability & accuracy of 2.0 Cm/Cmk at +/- 7%
Weight (lbs): 2.5 lb
$10,041.85
Cable, 3 Meter, Swivel Assy
CL 301903-3M
CL 301903-3M
CABLE, TOOL, ANGLE SWIVEL, 3 METER- 3 Meter Right Angle Swivel Tool Cable
- For applications with tools suspended overhead.
$4,072.25
30 Series Nutsetter
CL 30EAN12EA3
CL 30EAN12EA3
NUTSTR, 30 SERIES AH - 12NM1 million cycles maintenance free and customizable features to fit any application. Light weight and ergonomic design for applications up to 205 Nm.
Weight (lbs): 2.5 lb
- 30 Series Low torque applications, 50 Series High torque applications
- 1.3 Nm to 205 Nm Torque range
- 3/8, 1/2, 3/4 square output drive
- Engineered to provide 1 million cycles maintenance-free
- Repeatability & accuracy of 2.0 Cm/Cmk at +/- 7%
Weight (lbs): 2.5 lb
$10,287.55
NUTSTR, 30 SERIES INLINE - 11.6NM QC
CL 30ESN12EAQ
CL 30ESN12EAQ
NUTSTR, 30 SERIES INLINE - 11.6NM QCHigh speed and accuracy for applications up to 26 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.34 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.34 lb
$9,828.00
Nutrunner
CL 34RAA11AL3
CL 34RAA11AL3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 2.69 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 2.69 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,013.10
Nutrunner, R/A, 18-37 NM Shutoff
CL 34RAA37AX3
CL 34RAA37AX3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.4 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.4 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,577.30
Nutrunner, R/A, 12-24 Ft Lbs, Reversible
CL 34RAA33AX3
CL 34RAA33AX3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.51 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.51 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,390.75
Nutrunner
CL 34RAA26AH3
CL 34RAA26AH3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.2 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.2 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,199.65
Nut Runner-Clecomatic
CL 34RAA68AZ4
CL 34RAA68AZ4
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$5,059.60
Shutoff Pulse Tool
CL 35PTHH40Q
CL 35PTHH40Q
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Quick Change
Tool Configuration: Pistol
Weight (lbs): 2.31 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Quick Change
Tool Configuration: Pistol
Weight (lbs): 2.31 lb
7/16 Quick Change Chuck available separately as an accessory
$4,135.95
Shutoff Pulse Tool 20-35 NM
CL 35PTHH403
CL 35PTHH403
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.45 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.45 lb
7/16 Quick Change Chuck available separately as an accessory
$3,881.15
Nutrunner
CL 34RAA15AM3
CL 34RAA15AM3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 2.9 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 2.9 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,013.10
Nutrunner
CL 34RAA75AZ4
CL 34RAA75AZ4
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$5,150.60
3/8 Pulse Nutrunner 20-35Nm
CL 35PTHHA403
CL 35PTHHA403
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.45 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.45 lb
7/16 Quick Change Chuck available separately as an accessory
$4,049.50
Pulse Tool 7/16 Quick Change Shut-Off
CL 35STHFC40Q
CL 35STHFC40Q
Pulse Tool 7/16 Quick Change Shut-OffDurable, Economical low maintenance low noise levels, external speed control, efficient air motor, reversible, torque signal port
Drive Type: Quick Change
Tool Configuration: Inline
Weight (lbs): 3.31 lb
- Durable, Economical low maintenance
Drive Type: Quick Change
Tool Configuration: Inline
Weight (lbs): 3.31 lb
$4,923.10
Shutoff Pulse, Inline, 1/2 Sq Dr, 15-35 nm
CL 35STHFC404
CL 35STHFC404
Shutoff Pulse,Inline,1/2 Sq Dr, 15-35NmDurable, Economical low maintenance low noise levels, external speed control, efficient air motor, reversible, torque signal port
Drive Type: Square
Tool Configuration: Inline
Weight (lbs): 3.31 lb
- Durable, Economical low maintenance
Drive Type: Square
Tool Configuration: Inline
Weight (lbs): 3.31 lb
$4,358.90
4HP VERT GRD, 6K RPM, 6in CUP WHEEL GUARD
CL 4060AVL-06
CL 4060AVL-06
4HP VERT GRD, 6K RPM, 6" CUP WHEEL GUARD6,000 RPM 4.0 hp (3.1 kW)
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 11.7 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
- Maximum material removal in any application
- Powerful motor delivering ultimate torque
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 11.7 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
$1,212.60
Grinder, Verticle, 4hp, 9in Guard
CL 4060AVL-09
CL 4060AVL-09
4HP VERT GRD, 6K RPM, 9" GUARD6,000 RPM 4.0 hp (3.1 kW)
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 11.9 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
- Maximum material removal in any application
- Powerful motor delivering ultimate torque
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 11.9 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
$1,032.00
Nutrunner, 10-20 Ft Lb, 3/8 Sq Dr
CL 34RAA28AH3
CL 34RAA28AH3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.31 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.31 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,199.65
Nutrunner
CL 34RAA08AL3
CL 34RAA08AL3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 2.69 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 2.69 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,013.10
3/8 Sq Dr. R/A Nutrunner, 24-47 Nm
CL 34RAA47AX3
CL 34RAA47AX3
NUTRUNNER (M8)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.4 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.4 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$4,722.90
Pulse Tool 185-295 Ft. Lbs.
CL 400PTHFC206
CL 400PTHFC206
PULSNTSDurable, Economical low maintenance low noise levels, external speed controlefficient air motor reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 11.7 lb
- Durable, Economical low maintenance
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 11.7 lb
$7,835.10
Nutsetter, R/A, Wireless
CL 47BAYPB65P4L
CL 47BAYPB65P4L
CLECO WIRELESS NUTSETTER ANGLELightweight Right angle tool designed for safety critical applications
Weight (lbs): 4.56 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications with a CM/CMK of 2.0 at +/- 7% accuracy
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Ergonomic - Reduce operator fatigue with lighter, ergonomic tools
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 4.56 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$31,859.10
CLECO WIRELESS NUTSETTER ANGLE
CL 47BAYB90P4
CL 47BAYB90P4
CLECO WIRELESS NUTSETTER ANGLE
$27,677.65
CLECO WIRELESS NUTSETTER ANGLE
CL 47BAYPB90P4
CL 47BAYPB90P4
CLECO WIRELESS NUTSETTER ANGLERight angle tool designed for safety critical applications
Weight (lbs): 9.2 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications with a CM/CMK of 2.0 at +/- 7% accuracy
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 9.2 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$28,833.35
Cleco Wireless Crowfoot Nutsetter
CL 47BCYSB30C1
CL 47BCYSB30C1
CLECO WIRELESS CROWFOOT NUTSETTERCrowfoot tool designed for hard to reach, safety critical applications
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$28,373.80
Nutsetter, R/A, Wireless
CL 47BAYPB35P3L
CL 47BAYPB35P3L
CLECO WIRELESS NUTSETTER ANGLELightweight Right angle tool designed for safety critical applications
Weight (lbs): 4.14 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications with a CM/CMK of 2.0 at +/- 7% accuracy
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Ergonomic - Reduce operator fatigue with lighter, ergonomic tools
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 4.14 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$24,469.90
Torque Bar, Steel
CL 48047128
CL 48047128
TORQUE BAR-STEEL- Improved operator safety
- Keeps hands away from assembly
- One hand operation
$441.00
3/8 Sq Dr R/A Nutrunner, 34-68 Nm
CL 34RAA68AZ3
CL 34RAA68AZ3
NUTRUNNER (34)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$5,059.60
30 Series Inline Nutsetter, 26Nm
CL 30ESN26FC3
CL 30ESN26FC3
NUTSTR, 30 SERIES INLINE - 26NMHigh speed and accuracy for applications up to 26 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.34 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.34 lb
$11,893.70
NutSetter, 50 Series, 205 NM
CL 50EAN205NA6
CL 50EAN205NA6
NUTSTR, 50 SERIES AH - 205NM1 million cycles maintenance free and customizable features to fit any application. High speed and accuracy for applications up to 205 Nm.
Weight (lbs): 8.7 lb
- 30 Series Low torque applications, 50 Series High torque applications
- 1.3 Nm to 205 Nm Torque range
- 3/8, 1/2, 3/4 square output drive
- Engineered to provide 1 million cycles maintenance-free
- Repeatability & accuracy of 2.0 Cm/Cmk at +/- 7%
Weight (lbs): 8.7 lb
$15,197.00
Nutsetter, 50 Series Inline Tool - 28NM
CL 50ESN28FD3
CL 50ESN28FD3
NUTSTR, 50 SERIES INLINE - 28NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.98 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.98 lb
$13,381.55
Nutsetter, CC Pistol, 12Nm
CL CCBPW123
CL CCBPW123
NUTSTR, CC PISTOL - 12NMAssembly line tough, designed for Quality Critical Applications and programming on the tool
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
- Durable - Assembly line tough (Drop tested up to 5 feet!)
- Reliable - Increases uptime with 500k cycles between maintenance
- Ergonomic - Reduces operator fatigue while delivering state-of-the-art power and intelligence
- Easy to Use - Large user interface allows easy on-the-tool programming without a controller
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
$3,094.00
Nutsetter, CC Pistol, 22Nm
CL CCBPW22Q
CL CCBPW22Q
NUTSTR, CC PISTOL - 22NM QAssembly line tough, designed for Quality Critical Applications and programming on the tool
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
- Durable - Assembly line tough (Drop tested up to 5 feet!)
- Reliable - Increases uptime with 500k cycles between maintenance
- Ergonomic - Reduces operator fatigue while delivering state-of-the-art power and intelligence
- Easy to Use - Large user interface allows easy on-the-tool programming without a controller
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
$3,508.05
Nutsetter, CC Pistol, 1000Nm, 3/4in Sq. Dr.
CL CCBPWN1000D6
CL CCBPWN1000D6
NUTSTR, CC PISTOL - 1000NM - 3/4 SQ DRAssembly line tough, designed for Critical High Torque Applications and programming on the tool
Weight (lbs): 14.73 lb
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
- FastApps - Program up to 10 applications directly on the tool or connect to a controller for maximum functionality
- Versatile - 40-2000 Nm range allowing more flexibility in your tool
- Reliable - Norbar torque multiplier provides proven accuracy and quality
- Access - 360 degree rotating head and handle for maximum accessibility
Weight (lbs): 14.73 lb
Values do not include battery. 2ah Battery weighs 0.43kg. 5ah Battery weighs 0.72kg.
Call for pricing
HAMMER CHIPPING 3 HEX NOSE
CL CH-30-HX
CL CH-30-HX
HAMMER CHIPPING 3" HEX NOSE STD RETHeavy duty for rugged use
Type Housing: Aluminum
Weight (lbs): 15 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
- Heavy duty for rugged use
- Ring valve hard hitting hammer
- Forged steel hammer
- Heat treated cylinder & piston for reduced wear
- Replaceable bushing
Type Housing: Aluminum
Weight (lbs): 15 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
$868.60
3in Round Nose Pistol Grip Chip Hammer
CL CH-30-RD
CL CH-30-RD
HAMMER CHIPPING 3" RD NOSE STD RETHeavy duty for rugged use
Type Housing: Aluminum
Weight (lbs): 15 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
- Heavy duty for rugged use
- Ring valve hard hitting hammer
- Forged steel hammer
- Heat treated cylinder & piston for reduced wear
- Replaceable bushing
Type Housing: Aluminum
Weight (lbs): 15 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
$860.00
CellClutch Tool, Right Angle, 2.2-8 NM, 915 RPM, 3/8 SQ Drive
CL CLBA083
CL CLBA083
NUTRUNNER, CL AH - 8NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Right Angle
Weight (lbs): 3.3 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Right Angle
Weight (lbs): 3.3 lb
$1,475.00
CellClutch Tool, Right Angle, 3.3-12NM, 650 RPM, 3/8 SQ Drive
CL CLBA123
CL CLBA123
NUTRUNNER, CL AH - 12NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Right Angle
Weight (lbs): 3.3 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Right Angle
Weight (lbs): 3.3 lb
$1,475.00
CellClutch Tool, Right Angle, 15.1-41 NM, 185 RPM, 3/8 SQ Drive
CL CLBA403
CL CLBA403
NUTRUNNER, CL AH - 40NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Right Angle
Weight (lbs): 4.1 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Right Angle
Weight (lbs): 4.1 lb
$2,015.00
CellClutch Tool, Right Angle, 8.3-21 NM, 360 RPM, 3/8 SQ Drive
CL CLBA203
CL CLBA203
NUTRUNNER, CL AH - 20NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
$1,475.00
CellClutch Tool, Right Angle, 8.3-30 NM, 255 RPM, 3/8 SQ Drive
CL CLBA303
CL CLBA303
NUTRUNNER, CL AH - 30NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Right Angle
Weight (lbs): 3.9 lb
$2,015.00
CellClutch Tool, Pistol, 1500 RPM, 1.1-4 NM, 1/4 QC
CL CLBP04Q
CL CLBP04Q
SCREWDRIVER, CL PISTOL - 4NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
- Reduced Operator Error - Pre-set torque, ok not ok green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
$870.00
CellClutch Tool, Pistol, 985 RPM, 2.1-8 NM, 1/4 QC
CL CLBP08Q
CL CLBP08Q
SCREWDRIVER, CL PISTOL - 8NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
- Reduced Operator Error - Pre-set torque, " ok" " not ok" green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
$870.00
CellClutch Tool, Pistol, 700 RPM, 3.2-12 NM, 1/4 QC
CL CLBP12Q
CL CLBP12Q
SCREWDRIVER, CL PISTOL - 12NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
- Reduced Operator Error - Pre-set torque, " ok" " not ok" green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Speed Control - Easily change the tool's RPM settings to meet the required application requirements.
Tool Configuration: Pistol
Weight (lbs): 2.4 lb
$870.00
SCREWDRIVER, CLW PISTOL - 8NM
CL CLBPW08Q-NA
CL CLBPW08Q-NA
SCREWDRIVER, CLW PISTOL - 8NMCellClutch Cordless Assembly Tools deliver simple, programmable torque control to your line.
Weight (lbs): 2.4 lb
Note: Connected tools are region-specific. To avoid Wi-Fi or connectivity issues, make sure to order the correct model number for the region where the tool will be used.NA=North America, EU=Europe, CH=China
- Reduced Operator Error - Pre-set torque, " ok" " not ok" green and red lights make tool operation simple.Eliminate cross threads and errors during rundowns with programmable speeds and strategies.
- Eliminate Over Torque Damage - Contactless electronic switch shuts off tightening rotation when set torque is reached.
- Reliable Single Battery Platform - Milwaukee M18 Red Lithium battery can be used across the entire Cleco cordless range to reduce complexity and costs in your plant.
- Quick Tool Installation - Setting the preferred torque is a quick and easy 3-step process: Complete a rundown, read the torque and make adjustments, complete another rundown to verify required torque is met.
- Connected Advantage - WiFi (2.4 & 5 GHz) and Bluetooth v4.2 (Bluetooth Low Energy and BR/EDR) connected for easy-to-program setting adjustments, live reporting, traceability, and batch counting through the mPro controller platform.*Available in Connected version only, mPro Controller sold separately
Weight (lbs): 2.4 lb
Note: Connected tools are region-specific. To avoid Wi-Fi or connectivity issues, make sure to order the correct model number for the region where the tool will be used.NA=North America, EU=Europe, CH=China
$1,001.00
Screwdriver, CLW Pistol, 700 RPM, 3.2-12 NM, 1/4 QC
CL CLBPW12Q-NA
CL CLBPW12Q-NA
SCREWDRIVER, CLW PISTOL, 700 RPM, 3.2-12 NM, 1/4 QC
$1,001.00
3.0-30 NM CLECO TORQUE ANALYZER
CL CTA3038
CL CTA3038
3.0-30 NM CLECO TORQUE ANALYZERThe Cleco Torque Analyzer is supplied with a built-in transducer and a standard rundown adapter and can be used as either a portable device or fixed permanently using the mounting bars.
- Choice of measurement modes including track, peak, pulse, and click
- Memory for 999 date- and time-stamped readings for complete traceability
- 3-color LED indication of torque measurement status
- Easy-to-operate for fast and accurate torque readings and assembly tool auditing
- Automatically switches to highest voltage power source (main/USB/battery)
$3,700.00
Payment options
