Search
CLECO S10555
CLECO S10555 branded products
Cleco Wireless Crowfoot Nutsetter
CL 47BCYSB30C1
CL 47BCYSB30C1
CLECO WIRELESS CROWFOOT NUTSETTERCrowfoot tool designed for hard to reach, safety critical applications
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 6.1 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$28,373.80
Nutsetter, R/A, Wireless
CL 47BAYPB35P3L
CL 47BAYPB35P3L
CLECO WIRELESS NUTSETTER ANGLELightweight Right angle tool designed for safety critical applications
Weight (lbs): 4.14 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
- Accurate - Designed for safety critical applications with a CM/CMK of 2.0 at +/- 7% accuracy
- Economical - Save money, time and space by pairing up to 16 tools to just one Mpro Controller
- Ergonomic - Reduce operator fatigue with lighter, ergonomic tools
- Reliable - Increase uptime with 500k cycles between maintenance periods
- Interchangeable - Decrease downtime by swapping tools quickly on the assembly line with the LiveWire memory chip
Weight (lbs): 4.14 lb
General: All tools must be used with an approved Cleco tightening controller or suitable PC software. Battery weights: 26 V Li-Ion 1.1lbs. (0.50kg), 44 V Li-Ion 1.9 lbs. (0.85kg). The 44 V battery is 19mm/.705" shorter than the 26V battery. Extra Equipment: Scanner, sockets, batteries, and chargers must be ordered separately.
$24,469.90
Torque Bar, Steel
CL 48047128
CL 48047128
TORQUE BAR-STEEL- Improved operator safety
- Keeps hands away from assembly
- One hand operation
$441.00
3/8 Sq Dr R/A Nutrunner, 34-68 Nm
CL 34RAA68AZ3
CL 34RAA68AZ3
NUTRUNNER (34)4 - 55 ftlbs / 8 - 75 Nm
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
- Lightweight, ergonomic, and easy to service
- Indexable angle head for added versatility
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Heavy-duty Cleco motor is the industry standard for reliability
- Oil-less blades reduce oil mist in work area
Tool Configuration: Right Angle
Weight (lbs): 3.7 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Suspension bail Clutch adjustment tool Optional Equipment: Service wrench: 201898
$5,059.60
30 Series Inline Nutsetter, 26Nm
CL 30ESN26FC3
CL 30ESN26FC3
NUTSTR, 30 SERIES INLINE - 26NMHigh speed and accuracy for applications up to 26 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.34 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.34 lb
$11,893.70
NutSetter, 50 Series, 205 NM
CL 50EAN205NA6
CL 50EAN205NA6
NUTSTR, 50 SERIES AH - 205NM1 million cycles maintenance free and customizable features to fit any application. High speed and accuracy for applications up to 205 Nm.
Weight (lbs): 8.7 lb
- 30 Series Low torque applications, 50 Series High torque applications
- 1.3 Nm to 205 Nm Torque range
- 3/8, 1/2, 3/4 square output drive
- Engineered to provide 1 million cycles maintenance-free
- Repeatability & accuracy of 2.0 Cm/Cmk at +/- 7%
Weight (lbs): 8.7 lb
$15,197.00
Nutsetter, 50 Series Inline Tool - 28NM
CL 50ESN28FD3
CL 50ESN28FD3
NUTSTR, 50 SERIES INLINE - 28NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 2.98 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 2.98 lb
$13,381.55
Nutsteer, 50 Series Inline - 123NM
CL 50ESN125KD4
CL 50ESN125KD4
NUTSTR, 50 SERIES INLINE - 123NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 5.29 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 5.29 lb
$14,910.35
6 Meter Cable
CL 542778-6M
CL 542778-6M
CABLE ASM 6M 300V- Use to connect an 67 Series tool to an mPro400 controller
$3,144.05
CABLE, TOOL, ANGLE SWIVEL, 10 METERS
CL 544055-10M
CL 544055-10M
CABLE, TOOL, ANGLE SWIVEL, 10 METER- Use to connect an 67 Series tool to an mPro400 controller
$4,686.50
3 Meter Cable
CL 542778-3M
CL 542778-3M
CABLE ASM 3M 300V- Use to connect an 67 Series tool to an mPro400 controller
$2,570.75
Magnalube-G, 1 Pound Grease
CL 513156
CL 513156
GREASE TEFLON-1LBUnder normal conditions of use, lubrication products sold separately for or used within these tools should not cause an exposure hazard. Refer to the Material Safety Data Sheet M.S.D.S. for Safety and Disposal information. M.S.D.S. sheets shown in the chart are available upon request.
$100.00
Cable, Tool, Inline Swivel, 10 Meters
CL 544055-2M
CL 544055-2M
Cable, Tool, Inline Swivel, 10 Meters
$2,002.00
Cable, 15 Meters
CL 542778-15M
CL 542778-15M
CABLE ASM 15M 300V- Use to connect an 67 Series tool to an mPro400 controller
$4,750.20
Nutsetter, 50 Series Inline Tool - 65NM
CL 50ESN65HD4
CL 50ESN65HD4
NUTSTR, 50 SERIES INLINE - 66NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 4.19 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 4.19 lb
Call for pricing
Nutsetter, 50 Series Inline - 43NM
CL 50ESN43GD3
CL 50ESN43GD3
NUTSTR, 50 SERIES INLINE - 43NMHigh speed and accuracy for applications up to 84 Nm. Mounts easily with machined splines and locknut.
Weight (lbs): 3.64 lb
- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 3.64 lb
$13,836.55
6 Mter Cable With Swivel
CL 544055-6M
CL 544055-6M
CABLE, TOOL, ANGLE SWIVEL, 6 METER- Use to connect an 67 Series tool to an mPro400 controller
$3,953.95
Neo Tek NutSetter, Tube Nut, 30Nm
CL 50ETN30T3
CL 50ETN30T3
NUTSTR, TUBE NUT, 30Nm- 1 Million Cycles Maintenance Free
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Tactile & Audible Operator Feedback
- Programmable Multi-function Buttons
Weight (lbs): 4.23 lb
$16,612.05
Fieldbus Ethernet-IP Adapter
CL 544172PT
CL 544172PT
ETHERNET-IP; FIELDBUS- For use in mPro400 and mPro200 Series controllers (544172PT)
- For use in mPro300 (962297PT)
$925.00
Neotek NutSetter Package With Controller, Cable, Tubenut Socket
CL 50ETN30T3+SOCKET
CL 50ETN30T3+SOCKET
Neotek NutSetter Package With Controller, Cable, Tubenut Socket
Call for pricing
Oil/Pulse Tool, 1 Quart
CL 539317
CL 539317
OIL 1 QT - HYDRO J26Under normal conditions of use, lubrication products sold separately for or used within these tools should not cause an exposure hazard. Refer to the Material Safety Data Sheet M.S.D.S. for Safety and Disposal information. M.S.D.S. sheets shown in the chart are available upon request.
$66.00
Socket 1/2 In SQ Dr 3/4 In Hex 3-1/4 In OAL
CL 5524
CL 5524
SCKT 1/2" SQ DR 3/4" HEX 3-1/4" OAL1/2" Drive - SAE - 6 Point and Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Weight: 0.448 lb
- Diameter Drive End (C): 1-1/8 in
- Diameter Nose End (B): 1-1/32 in
- Hex Opening: 3/4 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 15/32 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 3-1/4 in
- Set: No
$47.59
Socket 1/2 In SQ Dr 11/16 In, Hex 3-1/4 In OAL
CL 5522
CL 5522
SCKT 1/2" SQ DR 11/16" HEX 3-1/4" OAL1/2" Drive - SAE - 6 Point and Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Weight: 0.301 lb
- Diameter Drive End (C): 15/16 in
- Diameter Nose End (B): 15/16 in
- Hex Opening: 11/16 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 7/16 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 3-1/4 in
- Set: No
$33.76
Shutoff Pulse, Pistol, 3/8 Sqdr, 30-55 nm
CL 55PTHH403
CL 55PTHH403
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.54 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.54 lb
7/16 Quick Change Chuck available separately as an accessory
$4,049.50
3/8 Pulse Nuttsetter
CL 55PTHHA403
CL 55PTHHA403
PULSNTSMarket leading repeatability unmatched accuracy, low maintenance, inertia shut-off, low noise level, efficient 3 chamber air motor, external speed control, oil less blades reversible torque signal port
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.67 lb
7/16 Quick Change Chuck available separately as an accessory
- Durable, Economical low maintenance
- Adaptor 935472 available 3/8in Square to 7/16" Quick Change
Drive Type: Square
Tool Configuration: Pistol
Weight (lbs): 2.67 lb
7/16 Quick Change Chuck available separately as an accessory
$4,231.50
Inline Nutrunner, 1/2 In Sq Dr
CL 55RNAL-3-4
CL 55RNAL-3-4
NUTRUNNER25 - 67 ftls / 34 - 91Nm - Use with Torque Reaction
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
- Engineered for performance, durability, mounting versatility, and serviceability
- Durable Clecomatic shut off clutch delivers best in class torque repeatability
- Heavy duty motor, gearing and clutch for long life
- Torque reaction bar supplied with tool
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
$4,877.60
Nutrunner, R/A, 136 NM, 195 RPM
CL 55RNL-3T-4
CL 55RNL-3T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,650.00
Nut Runner, Right Angle, 1/2 In Sq Dr, 26-64 Ft Lbs, 280 RPM
CL 55RNAL-4T-4
CL 55RNAL-4T-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$5,259.80
Angle Nut Runner
CL 55RNAL-3T-4
CL 55RNAL-3T-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 7.8 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$5,259.80
Nut Driver 30 - 67 FT.LBS
CL 55RNAL-2-4
CL 55RNAL-2-4
NUTRUNNER25 - 67 ftls / 34 - 91Nm - Use with Torque Reaction
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
- Engineered for performance, durability, mounting versatility, and serviceability
- Durable Clecomatic shut off clutch delivers best in class torque repeatability
- Heavy duty motor, gearing and clutch for long life
- Torque reaction bar supplied with tool
Tool Configuration: Inline
Weight (lbs): 6.5 lb
General: Tool performance rated at 90 psi (620kPa) air pressure Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar 869769
$5,642.00
Cable, Field, Options, 19 Pin, M23, 25M
CL 572971PT-250
CL 572971PT-250
Cable, Field, Options, 19 Pin, M23, 25M
$2,670.00
Nutrunner, Stall, Lever, 41 Ft Lbs Max, 490 Rpm
CL 55RNL-7T-4
CL 55RNL-7T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.1 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,231.50
Nutsetter, Pistol, Swingbar, Stall, Direct Drive, 3/4 Drive, 83-111 Ft Lb
CL 64TTS150D6
CL 64TTS150D6
NUTSTR PISTOL SWINGBARHigh power-to-weight ratio and slim profile nose delivers more torque to hard-to-reach joints
Tool Configuration: Pistol
Weight (lbs): 8.2 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar Steel Torque Reaction Bar (tools rated above 50 ft. lbs) Slave Square Drive (64TTS3850D12 & 64TTK3850D12)
- High power-to-weight ratio and slim profile nose delivers more torque to hard-to-reach joints
- Heavy-duty gearing is designed to withstand high torque output
- Top and bottom air inlets adds versitility in manufacturing
- Light weight with soft-touch handle for improved ergonomics
Tool Configuration: Pistol
Weight (lbs): 8.2 lb
General: Tool performance rated at 90 psi (620kPa) air pressure. Standard Equipment: Operating instructions & service manual Aluminum Torque Reaction Bar Steel Torque Reaction Bar (tools rated above 50 ft. lbs) Slave Square Drive (64TTS3850D12 & 64TTK3850D12)
Call for pricing
Angle Nutrunner, 145 Rpm, Stall, Reversible, 130 ft Lbs Max, 1/2 Sq Dr
CL 55RNL-2T-4
CL 55RNL-2T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,468.10
Nutrunner
CL 55RNL-4T-4
CL 55RNL-4T-4
NUTRUNNERUp to 325 ftlbs / 440 Nm
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
- Engineered for performance, durability, mounting versatility, and serviceability
- Torque can be adjusted by adjusting air pressure
- Heavy duty motor, gearing and angle head for long life
- Tool can be reversed if required
- Torque reaction plate supplied with 75 series.
Tool Configuration: Right Angle
Weight (lbs): 6.5 lb
GENERAL: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. STANDARD EQUIPMENT: Operation and maintenance instructions Torque reaction mounting plate (75 series)
$4,231.50
NEOTEK DC TOOL 92-443 FT/LBS 190 RPM
CL 70EAN600SA8T
CL 70EAN600SA8T
NUTSTR, 70 SERIES AH - 600NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Flexible high torque solutions
- 60% speed increase over current legacy series tools
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
Call for pricing
Socket, 3/4 In, SQ Dr, 3/4 HE X 4 OAL
CL 7524
CL 7524
3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Diameter Drive End (C): 1-3/8 in
- Diameter Nose End (B): 1-1/8 in
- Hex Opening: 3/4 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 15/32 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 4 in
$114.10
3/4in Nutrunner, 150-305 Ft-Lb, 80 Rpm
CL 75RNAL-2X-6
CL 75RNAL-2X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
NutRunner, Angle, 1/2" Square Drive
CL 75RNAL-2V-4
CL 75RNAL-2V-4
NutRunner, Angle, 1/2" Square Drive
$8,945.30
NutRunner
CL 75RNAL-3V-4
CL 75RNAL-3V-4
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 13.2 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
Screwdriver
CL 88RSATP-2C-3
CL 88RSATP-2C-3
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.37 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- C-3 3/8" Square or CQ 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.37 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
Nut Setter
CL 88RSATP-5CQ
CL 88RSATP-5CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
Screwdriver W/Bit & Finder
CL 8RSA-10
CL 8RSA-10
SCREWDRIVER0.5 - 5.3 ftlbs / 0.8 - 7.3 Nm - REQUIRES A SEPARATE BIT FINDER
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
- Bit Finder Style For Automation, Screwfeeders, Pick and Place
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
$2,520.70
Screwdriver
CL 88RSATP-7CQ
CL 88RSATP-7CQ
SCREWDRIVER1.2 - 14.7 ftlbs / 1.7 - 20 Nm
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products
- 3/8" Square or 1/4" Quick Release Output
Tool Configuration: Pistol
Weight (lbs): 3.13 lb
General: Tool performance rated at 90 psi (620kPa). Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque Side handle 861006PT on all models above 8 ftlbs torque capacity
$3,048.50
DGD INTELLIGENT SPINDLE SIZE 4 STANDARD LENGTH 3/4 IN SQUARE DRIVE ADAPTOR
CL 916643
CL 916643
OUTPUT SHAFT, DRIVE 4ZA, GR.4, 3/4"
$458.00
Tool Holder Dc, Infrared Interface
CL 935290
CL 935290
TOOL HOLDER, ANGLE, IRDA, 1 METER- Tool holders with and without IRDA controller pairing devices built in
$845.00
In-Line S/D Cleco-Matic
CL 8RSA-5BQ
CL 8RSA-5BQ
SCREWDRIVER0.5 - 6.2 ftlbs / 0.8 - 8.5 Nm
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
$2,293.20
Screwdriver
CL 8RSA-20BQ
CL 8RSA-20BQ
SCREWDRIVER0.5 - 6.2 ftlbs / 0.8 - 8.5 Nm
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
$2,293.20
Screwdriver
CL 8RSAL-20BQ
CL 8RSAL-20BQ
ScrewdriverDesigned for high volume assembly cell and line production
Tool Configuration: Inline
Weight (lbs): 2.62 lb
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline
Weight (lbs): 2.62 lb
$2,520.70
Screwdriver
CL 8RSA-20
CL 8RSA-20
SCREWDRIVER0.5 - 5.3 ftlbs / 0.8 - 7.3 Nm - REQUIRES A SEPARATE BIT FINDER
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
- Bit Finder Style For Automation, Screwfeeders, Pick and Place
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque Standard Equipment: Operating instructions & service manual Suspension bail D Require Bit Finder Ordered Seperately
$2,520.70
Screwdriver, 800 Rpm, 7-60 In Lbs Push & Lever Start-Push Button Reverse
CL 8RSAL-10BQ
CL 8RSAL-10BQ
Screwdriver,800 Rpm, 7-60 in lbs push & lever start-push button reverseDesigned for high volume assembly cell and line production
Tool Configuration: Inline
Weight (lbs): 2.87 lb
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline
Weight (lbs): 2.87 lb
$2,520.70
Screwdriver Inline
CL 8RSA-7BQ
CL 8RSA-7BQ
SCREWDRIVER0.5 - 6.2 ftlbs / 0.8 - 8.5 Nm
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.38 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
$2,293.20
Sq. Drive Adapter 7/16 QC
CL 935472
CL 935472
QUICK CHANGE INTERNAL SQ DR 3/8"Converts to quick-change chuck
- Adapts 3/8" Square to 7/16" Quick Change
$264.00
Screwdriver
CL 8RSA-40BQ
CL 8RSA-40BQ
SCREWDRIVER0.5 - 6.2 ftlbs / 0.8 - 8.5 Nm
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
- Compact design increases productivity, saves weight, and is easy to integrate into any assembly environment
- Dependable Clecomatic clutch delivers consistent torque accuracy and repeatability
- Cleco motor is the industry standard for durability
- Easy to repair and maintain, with high parts interchangeability to other Cleco products.
Tool Configuration: Inline;Push to Start
Weight (lbs): 2.12 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail. All torque springs required to meet indicated torque.
$2,293.20
Payment options
