Airpower | CLECO S10555 branded products

DC 4171

Rotor Blade

$12.40

DC 4183

O-RING

$1.00

DC 4193

Governor Module W/Nozzle

$293.00

DC 4225

Ring Lock

$48.00

DC 4281

Screen, Air Inlet

$12.40

DC 45-0948

HOSE 5'

3/16 & 1/4 hoses have braided covers, all others have neoprene covers.

$48.00

DC 45-0983

GREASE GEAR, DOTCO, 2 OZ.

Under normal conditions of use, lubrication products sold separately for or used within these tools should not cause an exposure hazard. Refer to the Material Safety Data Sheet M.S.D.S. for Safety and Disposal information. M.S.D.S. sheets shown in the chart are available upon request.

$8.90

Bearing

DC 500

Bearing

$36.00

Bearing

DC 502

Bearing

$110.00

Bearing

DC 505

Bearing

$38.00

O-Ring

DC 536591

O-Ring

$6.40

Double Bearing

DC 543

Double Bearing

$97.00

Bearing

DC 548

Bearing

$45.00

Bearing, Needle

DC 572

Bearing, Needle

$34.00

Ball Bearing

DC 573

Ball Bearing

$44.00

O-ring

DC 6051

O-ring

$2.20

Set Screw

DC 6057

Set Screw

$0.90

ROTOR

DC 7654S

ROTOR

$203.00

Spindle

DC 7660

Spindle

$230.00

Dead Handle

DC 7678

Dead Handle

$47.00

Lube Disc S/A

DC 7755

Lube Disc S/A

$15.50

Rotor

DC 7941

Rotor

$244.00

Inlet Tube

DC 948

Inlet Tube

$13.40

Lock Ring

DC 967

Lock Ring

$12.40

Spacer

DC 978

Spacer

$17.60

Throttle Pin

CL 204956

Throttle Pin

$45.00

Vane

GD 10111

Vane

$13.40

Trigger

GD 1110038

Trigger

$10.30

Suspension Bail

GD 1110909

Suspension Bail

$161.00

Bearing

GD 30063

Bearing

$140.00

Bearing

GD 30076

Bearing

$53.00

Oring

GD 504970

Oring

$0.80

O-Ring

GD 541528

O-Ring

$2.80

1/4 Hex Drive X #2 Phillips X 1-15/16

AX 492X

BIT 1/4 HEX PWR DR #2 PH 1-15/16" 49MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.023 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No

$1.82

1/4 Hex Drive X #3 Phillips X 2-3/4

AX 4930-AX

BIT 1/4 HEX PWR DR #3 PH 2-3/4" 70MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.034 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 3
Set: No

$3.03

1/4 Pozidriv Hex Drive X #3 X 2-3/4

AX 493-A-PZDX

BIT 1/4 HEX PWR DR #3 POZI 2-3/4" 70MM
1/4" Hex Power Drive - Pozidriv Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Pozidriv is a registered trademark of the Phillips Screw Company.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Pozidriv is a registered trademark of the Phillips Screw Company.

Weight: 0.045 lb

Drive: Hex Power Drive
Fastener Type: Pozidriv

Long Description: 1/4", Hex Power Drive

Overall Length: 2.75 in, 70.0 mm
Point Size: 3
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$4.85

1/4 Hex Power Drive X #3 Sq. Recess Bit

AX 954-A-3X

BIT 1/4 HEXPWR DR #3 ROB-SQ 2-3/4" 70MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.038 lb

Drive: Hex Power Drive
Fastener Type: Square Recess

Nominal Size: 9/64 in

Overall Length: 2.75 in, 70.0 mm
Point Size: 3
Set: No

$3.31

1/4 Hex Power Drive X #1 Sq. Recess Bit

AX 954-B-1X

BIT 1/4 HEXPWR DR #1 ROB-SQ 3-1/2" 89MM
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.048 lb

Drive: Hex Power Drive
Fastener Type: Square Recess

Nominal Size: 3/32 in

Overall Length: 3.5 in, 89.0 mm
Point Size: 1
Set: No

$4.18

3/8in Drive Socket, 12/Min

AX M3E10

SCKT 3/8 SQ DR 5/16 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - 6 Point & 6 Point Magnetic, For Predrilled Holes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

Weight: 0.091 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in

Opening Depth (D) (in): 3/16 in

Overall Length A: 1-1/4 in
Set: No

$20.82

3/8 Sq. Drive Socket X 5/16 6 Pt Hex

AX M3P10

SCKT 3/8 SQ DR 5/16 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - 6 Point & 6 Point Magnetic, For Self-Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-tapping screws are maximum hardness.

Weight: 0.091 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in

Opening Depth (D) (in): 3/16 in

Overall Length A: 1-1/4 in
Set: No

$27.03

1/4 Hex Drive Bit Holder X 4 In Oal

AX M-490-4

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 4 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.100 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 4.0 in, 102.0 mm
Set: No

$32.98

1/4 Hex Drive Bit Holder X 6

AX M-490-6

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.150 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 6.0 in, 152.0 mm
Set: No

$36.04

Nut Setter 1/4 Male Hex

AX M6N-0810-6

NUTSET 1/4 M HEXPWRDR 5/16 HEX 6 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.135 lb

Magnetism: Magnetic

Overall Length: 6.0 in
Set: No
Size: 5/16 in

$40.04

Nutsetter, 1/4 hex Drive, Magnetic, 4in

AX M6N-08-10M-4

NUTSET 1/4MHXPWRDR 10MMHEX 102MM OAL MAG
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.105 lb

Magnetism: Magnetic

Overall Length: 102.0 mm
Set: No
Size: 10 mm

$43.35

Nutsetter, 1/4 Hex Drive, Magnetic, 6in

AX M6N-08-10M-6

NUTSET 1/4MHXPWRDR 10MMHEX 152MM OAL MAG
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.147 lb

Magnetism: Magnetic

Overall Length: 76.0 mm
Set: No
Size: 10 mm

$50.58

1/4in Hex Nutsetter, 3/8 Mag, 4in OA

AX M6N-0812-4

NUTSET 1/4 M HEX PWR DR 3/8 HEX 4OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.105 lb

Magnetism: Magnetic

Overall Length: 4.0 in
Set: No
Size: 3/8 in

$38.68

1/4in Hex Nutsetter, 3/8" Mag, 6In

AX M6N-0812-6

NUTSET 1/4 M HEX PWRDR 3/8 HEX 6" OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.147 lb

Magnetism: Magnetic

Overall Length: 6.0 in
Set: No
Size: 3/8 in

$44.46

3/4in Sq Dr Univ. Adapter

AX MF-75-B

3/4in Sq Dr Univ. Adapter

$287.30

1/2 Sq Drv Bit Holder Adapter X7/16 Hex

AX SC-514

ADAP 1/2 SQ DR 7/16 FEMALE HEX 1-5/8 OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.211 lb
Body Diameter (D): 15/16 in, 24 mm

Hex Open. (A): 7/16 in
Magnetism: Non-Magnetic

Opening Depth (E): 17/32 in, 13 mm

Set: No

$20.95

1/2 Sq. Drv Bit Holder Adapter X 5/8 Hex

AX SC-520

ADAP 1/2 SQ DR 5/8 FEMALE HEX 1-1/2" OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.276 lb
Body Diameter (D): 1-1/8 in, 29 mm

Hex Open. (A): 5/8 in
Magnetism: Non-Magnetic

Opening Depth (E): 11/16 in, 17 mm

Set: No

$31.11

Bit

AX SD-1474-D

BIT 1/4 HEX PWR DR #2 PH 4 1/2 114MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.103 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 4.5 in, 114.0 mm
Point Size: 2
Set: No

$13.63

1/4in Hex Drive Shank

AX SH-59

EXT 1/4 MALE HEX DR 5/16 HEX 2" OAL
Shanks for Reversible Sockets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.036 lb

Male Hex Power Drive: 1/4 in
Male Hex Size: 5/16 in

Overall Length: 2.0 in
Set: No

$15.98

1/4in Male Hex Drive

AX SH-629-P

EXT 1/4 MALE HEX DR 1/4 HEX 1-15/16 OAL
Shanks for Reversible Sockets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.028 lb

Male Hex Power Drive: 1/4 in
Male Hex Size: 1/4 in

Overall Length: 2.0 in
Set: No

$16.77

1/4in Male Hex Drive

AX SH-629-P-4

EXT 1/4 MALE HEX DR 1/4 HEX 4 OAL
Shanks for Reversible Sockets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.061 lb

Male Hex Power Drive: 1/4 in
Male Hex Size: 1/4 in

Overall Length: 4.0 in
Set: No

$49.98

1/2 Sq Drive Socket Head Bit X 8mm Hex

AX SZ-5-7-8MM

BIT 1/2 FM SQ SRV DR 8MM HEX 2-1/2" 64MM
1/2" Drive Metric Socket Head Adapters & Inserts

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb
Bit Length (A): 7/8 in, 22 mm

Fastener Type: Socket Head

Hex Size: 8 mm

Overall Length: 2.5 in, 63.0 mm
Set: No

$26.86

Bit 3/8 Hex Drv Insert 5mm

AX SZ-7-5MM

Bit 3/8 Hex Drv Insert 5mm

$8.05

7/16in Hex Bit

AX SZ-7-6MM

7/16in Hex Bit

$7.74

Screen

CL 202453

Screen

$4.70

Spring

CL 202454

Spring

$22.70

Gear Case

CL 202502

Gear Case

$895.00

Nose Piece

CL 205977

Nose Piece

$8.30

1/2in Sq. Dr. Uni. Adapt. Ext.1/2in Fem

SX KHM-50-6

1/2in Sq. Dr. Uni. Adapt. Ext.1/2in Fem

$194.70

Jacobs Extension

30450DN

Jacobs Extension

$152.14

Pin

CL 207102

$0.80

Trigger

CL 207015

Trigger

$4.30

Reverse Valve Assembly

CL 301963PT

Reverse Valve Assembly

$197.00

3/8" FML SQ DRV, 5/16" HEX, 1.5" OVERALL LENGTH

AX CUSTOM SOCKET

3/8inch FML SQ DRV, 5/16inch HEX, 1.5inch OVERALL LENGTH

Call for pricing

CT APEX VORTEX ADAPTOR 3/8in, 25/Minimum

AX CAVAD224-25

CT APEX VORTEX ADAPTOR 3/8in, 25/Minimum

Call for pricing

DGD Intelligent Spindle, 300nm Max Torque, 453 RPM Max Speed

CL 3BUTS-3B300A-3K2B-3ZB

DGD Intelligent Spindle, 300nm Max Torque, 453 RPM Max Speed

Call for pricing

Air Motor

CL MA2G61492 (REPAIR)

Air Motor

Call for pricing

Cutter, Electrical Cable, 9.5" Length

CRES 0890CSJ

Cutter, Electrical Cable, 9.5inch Length

Call for pricing

Clutch Cam

CL 207591PT

Clutch Cam

$184.00

Driven Cam

CL 207589PT

Driven Cam

$147.00

Trip Slide

CL 203612

Trip Slide

$98.00

Spring

CL 203613

Spring

$9.50

Power Motor, 1/2 in. Keyed Spindle

CL 22M5440-50

Power Motor, 1/2 in. Keyed Spindle

$1,979.25

Nutsetter, 70 Series Inline Floating, 245 NM

CL 70ESR2453ZB

Nutsetter, 70 Series Inline Floating, 245 NM

$14,254.01

O-Ring

MP 208083PT

O-Ring

$0.90

Motor Housing

MP 208084PT

Motor Housing

$195.00

Muffler Kit

MP 208089PT

Muffler Kit

$97.00

Spring

MP 208091PT

Spring

$2.20

Spring Pin

MP 208148PT

Spring Pin

$0.70

ZERO SMOG EL 120V B

WF ZEROSMOGELN

ZERO SMOG EL 120V B

Call for pricing

Idler Gear, 20T

CL 46038191

Idler Gear, 20T

$173.00

Idler Gear, 17T

CL 46608121

Idler Gear, 17T

$411.00

3/8 Sq Drive Socket X 13mm Hex X 3.5 in OAL Mag

AX MB-13MM33

SCKT 3/8 SQ DR 13MM HEX 88.9MM OAL MB
3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.330 lb
Diameter Drive End (C): 20.6 mm
Diameter Nose End (B): 20.6 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 88.9 mm
Set: No

$73.53

1/4 Sq. Drive Socket X 1/4 6 Pt Hex

AX M1P08

1/4 Sq. Drive Socket X 1/4 6 Pt Hex

$14.54

Clutch Housing

MP 208078PT

Clutch Housing

$55.00

Socket Hex Imp. 3/8 Drive 5/16

AX 84400D

Socket Hex Imp. 3/8 Drive 5/16

Call for pricing

Socket, 18 MM 12 Point Thin Wall Extra Long, 1/2 Sq Dr

AX 18MM55-D

SCKT 1/2 SQ DR 18MM DBL-HEX 82.6MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.388 lb
Diameter Drive End (C): 25.4 mm
Diameter Nose End (B): 25.4 mm

Hex Opening: 18 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Double Hex

Overall Length A: 82.5 mm
Set: No

Call for pricing

3/8 Female Hex, 5/16 Female Hex, Socket, 1.5" Overall Length

AX AP ATGCSTSOCKET

3/8 Female Hex, 5/16 Female Hex, Socket, 1.5" Overall Length

Call for pricing

U Guard Sckt 1/2 Sq Dr 17mm Hex

AX UG-17MM55

SCKT CVRD 1/2 SQ DR 17MM HEX 82.6MM OAL
1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets

Weight: 0.001 lb

Drive End Sex: F
Drive End Type: Square
Drive Size: 1/2 in
Fastener End Sex: F
Fastener End Size: 17 mm
Fastener End Type: Hex

Magnetism: Non-Magnetic

Metal Socket Number: 17MM55
Opening Modifier: 6 Point Hex

Set: No

Call for pricing

Quick Change Retainer

CL 207067

Quick Change Retainer

$227.00