Search
CLECO S10555
CLECO S10555 branded products
Screwdriver, 19 Series Pistol Grip, 1/4 Quick Change
CL 19TTA15Q
CL 19TTA15Q
SCREWDRIVER (260 rpm, 14.7Nm)Up to 0.4 - 10.8 ftlbs / 0.6 - 14.7 Nm
Tool Configuration: Pistol
Weight (lbs): 1.94 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- 2 grip sizes available for added versatility
- Reverse lever can be rotated to accommodate left-or-right-handed operators
- Engineered to suit a wide range of applications, from high volume assembly to aerospace
Tool Configuration: Pistol
Weight (lbs): 1.94 lb
General: 90 psi (620kPa) required for maximum rated torque. Standard Equipment: Operating instructions & service manual Suspension bail All torque springs required to meet indicated torque.
$1,924.65
NEOTEK DC TOOL 92-443 FT/LBS 190 RPM
CL 70EAN600SA8T
CL 70EAN600SA8T
NUTSTR, 70 SERIES AH - 600NMDurability and unsurpassed RPM for high torque applications up to 4000 Nm
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
- Repeatability & Accuracy with 2.0 Cm/Cmk at +/- 7%
- Configurable LED light rings
- Flexible high torque solutions
- 60% speed increase over current legacy series tools
Weight (lbs): 23.9 lb
Note: 70 Series Tools require a 220/230 power supply to the controller
Call for pricing
Socket, 3/4 In, SQ Dr, 3/4 HE X 4 OAL
CL 7524
CL 7524
3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Diameter Drive End (C): 1-3/8 in
- Diameter Nose End (B): 1-1/8 in
- Hex Opening: 3/4 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 15/32 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 4 in
$114.10
3/4in Nutrunner, 150-305 Ft-Lb, 80 Rpm
CL 75RNAL-2X-6
CL 75RNAL-2X-6
NUTRUNNER26 - 305 ftls / 35 - 410 Nm
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
- Heavy-duty Cleco motor is the industry standard for reliability
- Durable Clecomatic Clutch delivers best-in-class torque repeatability and long calibration cycle
- Planetary gears designed for tool speed changes with minimal parts service and replacement
- Heavy-duty spindle bearings and splined retractable spindles reduces friction, improves torque repeatability, and prolongs life.
- External Torque Adjustment
Tool Configuration: Right Angle
Weight (lbs): 15 lb
General: Tool performance data measured at 6.2 bar inlet air pressure at the air inlet tube. Standard Equipment: Operation and maintenance instructions Torque reaction mounting plate (75 series) All torque springs necessary to achieve the stated torque.
$8,945.30
NutRunner, Angle, 1/2" Square Drive
CL 75RNAL-2V-4
CL 75RNAL-2V-4
NutRunner, Angle, 1/2" Square Drive
$8,945.30
Positive Clutch Screwdriver, 1/4 QC, Rev
MP MP2465
MP MP2465
Positive Clutch Screwdriver, 1/4 QC, Rev
$414.52
Clutch Kit (Clutch Plates, Pin & Spring)
MP 70528500
MP 70528500
Clutch Kit (Clutch Plates, Pin & Spring)
$31.00
Power Motor, 1/2 in. Keyed Spindle
CL 22M5440-50
CL 22M5440-50
Power Motor, 1/2 in. Keyed Spindle
$1,979.25
Socket, 18 MM 12 Point Thin Wall Extra Long, 1/2 Sq Dr
AX 18MM55-D
AX 18MM55-D
SCKT 1/2 SQ DR 18MM DBL-HEX 82.6MM OAL1/2" Drive - Metric - 6 Point & Double Hex, Thin Wall, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.388 lb
- Diameter Drive End (C): 25.4 mm
- Diameter Nose End (B): 25.4 mm
- Hex Opening: 18 mm
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 11.1 mm
- Opening Modifier: Double Hex
- Overall Length A: 82.5 mm
- Set: No
Call for pricing
3/8 Female Hex, 5/16 Female Hex, Socket, 1.5" Overall Length
AX AP ATGCSTSOCKET
AX AP ATGCSTSOCKET
3/8 Female Hex, 5/16 Female Hex, Socket, 1.5" Overall Length
Call for pricing
U Guard Sckt 1/2 Sq Dr 17mm Hex
AX UG-17MM55
AX UG-17MM55
SCKT CVRD 1/2 SQ DR 17MM HEX 82.6MM OAL1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.001 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/2 in
- Fastener End Sex: F
- Fastener End Size: 17 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 17MM55
- Opening Modifier: 6 Point Hex
- Set: No
Call for pricing
Nutsetter, 70 Series Inline Floating, 245 NM
CL 70ESR2453ZB
CL 70ESR2453ZB
Nutsetter, 70 Series Inline Floating, 245 NM
$14,254.01
3/8 Sq Drive Socket X 13mm Hex X 3.5 in OAL Mag
AX MB-13MM33
AX MB-13MM33
SCKT 3/8 SQ DR 13MM HEX 88.9MM OAL MB3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- No ring groove.
- Weight: 0.330 lb
- Diameter Drive End (C): 20.6 mm
- Diameter Nose End (B): 20.6 mm
- Hex Opening: 13 mm
- Magnetism: Magnetic
- Opening Depth (D) (in): 8.7 mm
- Opening Modifier: 6 Point Hex
- Overall Length A: 88.9 mm
- Set: No
$73.53
Bit, 12-24 THD DR, #2 PH 1.187in OAL
AX 552I
AX 552I
BIT 12-24 THD DR #2 PH 1-3/16" 30MM OAL12-24 Screw Shank Drive - Phillips Bits
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Made in the USA - Quality and Availability
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.015 lb
- Drive: Screw Shank Drive
- Fastener Type: Phillips
- Overall Length: 1.18 in, 30.0 mm
- Point Size: 2
- Set: No
$8.49
Dotco, Grinder, Ergo, FE, 20000 Rpm, 1/4in Collet
CL 12L2001-01LH
CL 12L2001-01LH
Dotco, Grinder, Ergo, FE, 20K, 1/4in Col, LH
$614.90
Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300
CL 12L2674-1A
CL 12L2674-1A
Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300
$1,191.10
3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex
AX 7348
AX 7348
3/4" Drive - SAE - 6 Point & Double Hex, Extra Long Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Diameter Drive End (C): 2-1/8 in
- Diameter Nose End (B): 2-1/4 in
- Hex Opening: 1-1/2 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 1 in
- Opening Modifier: 6 Point Hex
- Overall Length A: 4 in
$117.98
Cutter, Electrical Cable, 9.5" Length
CRES 0890CSJ
CRES 0890CSJ
Cutter, Electrical Cable, 9.5inch Length
Call for pricing
3/8" FML SQ DRV, 5/16" HEX, 1.5" OVERALL LENGTH
AX CUSTOM SOCKET
AX CUSTOM SOCKET
3/8inch FML SQ DRV, 5/16inch HEX, 1.5inch OVERALL LENGTH
Call for pricing
CT APEX VORTEX ADAPTOR 3/8in, 25/Minimum
AX CAVAD224-25
AX CAVAD224-25
CT APEX VORTEX ADAPTOR 3/8in, 25/Minimum
Call for pricing
Payment options
