Airpower | CLECO S10555 branded products

1/4 Torx Plus #40 Hex Power Drive Bit

AX 49-40IPX

BIT 1/4 HEX 40IP TXPLS 1-15/16" 49MM OAL
1/4" Hex Power Drive - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.031 lb

Drive: Hex Power Drive
Drive Size: 40IP
Fastener Type: Torx Plus

Measurement Across Lobes: .260 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$10.16

1/4 Hex Drive X T-06 Torx Hex X 2-3/4

AX 49-A-TX-06

BIT 1/4 HEX PWR DR T6 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.017 lb

Drive: Hex Power Drive
Drive Size: T-6
Fastener Type: Torx

Measurement Across Lobes: .065 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.06

1/4 Hex Drive X T-20 Torx Hex X 2-3/4

AX 49-A-TX-20

BIT 1/4 HEX PWRDR T20 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.023 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

1/4 Hex Drive X T-25 Torx Hex X 2-3/4

AX 49-A-TX-25

BIT 1/4 HEX PWRDR T25 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

1/4 Hex Drive X T-30 Torx Hex X 2-3/4

AX 49-A-TX-30

BIT 1/4 HEX PWRDR T30 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.034 lb

Drive: Hex Power Drive
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

AX 49-B-30IPX

BIT 1/4 HEX 30IP TXPLS 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.043 lb

Drive: Hex Power Drive
Drive Size: 30IP
Fastener Type: Torx Plus

Measurement Across Lobes: .216 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$12.85

1/4 Hex Drive X T-08 Torx Hex X 3-1/2

AX 49-B-TX-08

BIT 1/4 HEX PWR DR T8 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.019 lb

Drive: Hex Power Drive
Drive Size: T-8
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$14.44

1/4 Hex Drive X T-10 Torx Hex X 3-1/2

AX 49-B-TX-10

BIT 1/4 HEX PWRDR T10 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$10.03

1/4 Hex Drive X T-15 Torx Hex X 3-1/2

AX 49-B-TX-15

BIT 1/4 HEX PWRDR T15 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

1/4 Hex Drive X T-20 Torx Hex X 3-1/2

AX 49-B-TX-20

BIT 1/4 HEX PWRDR T20 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.028 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$10.03

BIT 1/4 HEX PWRDR T25 TX 3-1/2" 89MM OAL

AX 49-B-TX-25

BIT 1/4 HEX PWRDR T25 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.032 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Long Description: 1/4", Hex Power Drive

Measurement Across Lobes: .173 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

1/4 Hex Drive X T-10 Torx Hex X 6

AX 49-C-TX-10

BIT 1/4 HEX PWR DR T10 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.036 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

1/4 Hex Drive X T-15 Torx Hex X 6

AX 49-C-TX-15

BIT 1/4 HEX PWR DR T15 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.034 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.03

1/4 Hex Drive X T-20 Torx Hex X 6

AX 49-C-TX-20

BIT 1/4 HEX PWR DR T20 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.044 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

Picture of BIT 1/4 HEX DRV POWER # 7. TO

AX 49-TX-07

BIT 1/4 HEX PWR DR T7 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-7
Fastener Type: Torx

Measurement Across Lobes: .077 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

Picture of BIT 1/4 HEX DRV POWER # 25. T

AX 49-C-TX-25

BIT 1/4 HEX PWR DR T25 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.051 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

1/4 Hex Drive X T-08 Torx Hex X 1-15/16

AX 49-TX-08

BIT 1/4 HEX PWR DR T8 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-8
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

Picture of BIT 1/4 HEX DRV POWER # 9. TO

AX 49-TX-09

BIT 1/4 HEX PWR DR T9 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-9
Fastener Type: Torx

Measurement Across Lobes: .097 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

Picture of BIT 1/4 HEX DRV POWER # 10. T

AX 49-TX-10

BIT 1/4 HEX PWR DR T-10 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-15 Torx Hex X 1-15/16

AX 49-TX-15

BIT 1/4 HEX PWR DR T-15 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-20 Torx Hex X 1-15/16

AX 49-TX-20

BIT 1/4 HEX PWR DR T-20 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.018 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

AX 49-TX-25-W

BIT 1/4 HEX PWR DR T-25 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torxalign - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.020 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.06

1/4 Hex Drive X T-27 Torx Hex X 1-15/16

AX 49-TX-27

BIT 1/4 HEX PWR DR T-27 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Power Drive
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-30 Torx Hex X 1-15/16

AX 49-TX-30

1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Drive: Hex Power Drive
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.93 in, 49.0 mm
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Power Drive T-45 TX 1-15/16, 49MM

AX 49-TX-45

BIT 1/4 HEX PWR DR T-45 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.035 lb

Drive: Hex Power Drive
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .304 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$36.89

1/4 Sq. Drive Socket X 4mm 6 Pt Hex

AX 4MM11

SCKT 1/4 SQ DR 4MM HEX 22.2MM OAL
1/4" Drive - Metric - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.026 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 6.4 mm

Hex Opening: 4 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 2.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$15.54

1/2 Sq. Drive Socket X 11/16 6 Pt Hex

AX 5122

SCKT 1/2" SQ DR 11/16" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.255 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 11/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$31.96

BIT 10-32M TH PWR DR #1 POZI 1-1/2" 38MM, 25/Min

AX 501-PZDX

BIT 10-32M TH PWR DR #1 POZI 1-1/2" 38MM, 25/Min

$11.78

1/2 Sq. Drive Socket X 15/16 6 Pt Hex

AX 5130

SCKT 1/2" SQ DR 15/16" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.280 lb
Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-3/8 in

Hex Opening: 15/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$45.73

1/2 Sq. Drive Socket X 7/8 6 Pt Hex

AX 5128

SCKT 1/2" SQ DR 7/8" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.341 lb
Diameter Drive End (C): 1-5/16 in
Diameter Nose End (B): 1-5/16 in

Hex Opening: 7/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 9/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$40.80

1/2 Sq. Drive Socket X 1-5/16 Hex

AX 5142

SCKT 1/2" SQ DR 1-5/16" HEX 1-3/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.838 lb
Diameter Drive End (C): 1-7/8 in
Diameter Nose End (B): 1-7/8 in

Hex Opening: 1-5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$77.52

1/2 Sq. Drive Socket X 1-3/8 6 Pt Hex

AX 5144

1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 2 in
Diameter Nose End (B): 2 in

Hex Opening: 1-3/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-7/8 in

$78.46

1/2 Sq. Drive Socket X 1-5/8 6 Pt Hex

AX 5152

SCKT 1/2" SQ DR 1-5/8" HEX 2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 1.518 lb
Diameter Drive End (C): 2-3/8 in
Diameter Nose End (B): 2-3/8 in

Hex Opening: 1-5/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1-1/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$147.82

1/2 Sq. Drive Socket X 9/16 6 Pt Hex

AX 5218

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in

$27.03

1/2 Sq. Drive Socket X 5/8 6 Pt Hex

AX 5220

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 1 in
Diameter Nose End (B): 1 in

Hex Opening: 5/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in

$25.00

1/2 Sq. Drive Socket X 3/4 6 Pt Hex

AX 5224

SCKT 1/2" SQ DR 3/4" HEX 2-1/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.354 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in
Set: No

$36.72

AX 5230

SCKT 1/2" SQ DR 15/16" HEX 2-1/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.540 lb
Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-3/8 in

Hex Opening: 15/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in
Set: No

$43.35

1-1/2in X 1/2in Sq Dr. Socket, 12/Minimum

AX 5248

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 2-1/8 in
Diameter Nose End (B): 2-1/8 in

Hex Opening: 1-1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/2 in

$101.41

1/2 Sq. Drive Socket X 5/8 6 Pt Hex

AX 5320

SCKT 1/2" SQ DR 5/8" HEX 3-1/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.442 lb
Diameter Drive End (C): 1 in
Diameter Nose End (B): 1 in

Hex Opening: 5/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/4 in
Set: No

$30.69

1/2 Sq. Drive Socket X 9/16 6 Pt Hex

AX 5318

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/4 in

$31.71

1/2 Sq. Drive Socket X 3/4 6 Pt Hex

AX 5324

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/4 in

$39.02

1/2 Sq. Drive Socket X 1-1/4 6 Pt Hex

AX 5340

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 1-3/4 in
Diameter Nose End (B): 1-3/4 in

Hex Opening: 1-1/4 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/2 in

$99.45

1/2 Sq. Drive Socket X 9/16 6 Pt Hex

AX 5518

1/2" Drive - SAE - 6 Point and Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 13/16 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 3-1/4 in

$34.77

SCKT 1/2in SQ DR 3/4in HEX, 3-1/4in OAL

AX 5524

SCKT 1/2" SQ DR 3/4" HEX 3-1/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Thin Wall, Extra Long Length

Impact Rated; Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated; Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.448 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/32 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic
Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex
Overall Length A: 3-1/4 in
Set: No

$44.46

12-24 Torx Screw Shank X T-25 X 1-3/16

AX 55-TX-25

BIT 12-24 THD DR T25 TX 1-3/16" 30MM OAL
12-24 Screw Shank Drive - Torx Bits

Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.010 lb

Drive: Screw Shank Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.18 in, 30.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.96

1/2 Sq. Drive Socket X 3/8 4 Pt Sq.

AX 5612

1/2" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 3/4 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in

$29.92

Socket 1/2in Sq Dr 5/8in Sq, 1-1/2in OAL

AX 5620

SCKT 1/2" SQ DR 5/8" SQ 1-1/2" OAL
1/2" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.369 lb
Diameter Drive End (C): 1-1/4 in
Diameter Nose End (B): 1-1/4 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$42.84

Socket 1/2in Sq Dr 5/8in Dbl Sq, 1-1/2in OAL, 12/Min

AX 5620-D

SCKT 1/2 SQ DR 5/8 DBL SQ 1-1/2" OAL
1/2" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.358 lb
Diameter Drive End (C): 1-1/4 in
Diameter Nose End (B): 1-1/4 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Double Square

Overall Length A: 1-1/2 in
Set: No

$40.21

1/2 Sq. Drive Socket X 1-1/8 4 Pt Sq.

AX 5636

1/2" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 2 in
Diameter Nose End (B): 2 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/4 in
Opening Modifier: Single Square

Overall Length A: 1-3/4 in

$111.27

13/16 Double Square x 1/2in, Sq. Dr. Socket, 12/Minimum

AX 5826-D

SCKT 1/2 SQ DR 13/16 DBL SQ 3-1/2" OAL
1/2" Drive - SAE - Single Square & Double Square, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 1.221 lb
Diameter Drive End (C): 1-1/2 in
Diameter Nose End (B): 1-1/2 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 17/32 in
Opening Modifier: Double Square

Overall Length A: 3-1/2 in
Set: No

Call for pricing

1/4 6 Pt Hex Drive Nutsetter X 3/8

AX 6B-0812

NUTSET 1/4 MALE HEX DR 3/8 HEX 3-1/4 OAL
1/4" Drive 6 Point Hex Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.068 lb
Depth of Clearance (A): 1-3/8 in

Magnetism: Non-Magnetic

Overall Length: 3.25 in
Set: No
Size: 3/8 in
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$33.07

1/4 6 Pt Hex Drive Nutsetter X 9/16

AX 6B-0818

NUTSET 1/4 MALE HEXDR 9/16 HEX 3-1/4 OAL
1/4" Drive 6 Point Hex Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.117 lb
Depth of Clearance (A): 1-3/8 in

Magnetism: Non-Magnetic

Overall Length: 3.25 in
Set: No
Size: 9/16 in
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$44.97

1/4 6 Pt Hex Nutsetter X 5/16 X 3

AX 6N-0810-3

NUTSET 1/4 M HEX PWR DR 5/16 HEX 3 OAL
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.068 lb

Magnetism: Non-Magnetic

Overall Length: 3.0 in
Set: No
Size: 5/16 in

$23.79

1/4in Hex Dr Nutsetter

AX 6N-08-10M-4

NUTSET 1/4 MALEHXDR 10MM HEX 101.6MM OAL
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.088 lb

Magnetism: Non-Magnetic

Overall Length: 102.0 mm
Set: No
Size: 10 mm

$36.30

1/4 6 Pt Hex Nutsetter X 1/2 X 3

AX 6N-0816-3

NUTSET 1/4 M HEX PWR DR 1/2 HEX 3 OAL
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.108 lb

Magnetism: Non-Magnetic

Overall Length: 3.0 in
Set: No
Size: 1/2 in

$35.62

3/4 Sq. Drive Socket X 15/16 6 Pt Hex

AX 7130

3/4" Drive - SAE - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-1/2 in
Diameter Nose End (B): 1-1/2 in

Hex Opening: 15/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in

$47.69

SCKT 3/4" SQ DR 1-5/8" HEX, 2-1/4" OAL, 12/Minimum

AX 7152PT

SCKT 3/4" SQ DR 1-5/8" HEX, 2-1/4" OAL, 12/Minimum

Call for pricing

3/4" FML SQ DRV, 1-7/8" HEX, SCKT, 12/Minimum

AX 7160PT

3/4" FML SQ DRV, 1-7/8" HEX, SCKT, 12/Minimum

Call for pricing

1-1/8in Socket

AX 7436

3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-5/8 in
Diameter Nose End (B): 1-5/8 in

Hex Opening: 1-1/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/8 in

$66.73

3/4in Sq. Drive Socket X 3/4in Hex

AX 7524

3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated; Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated; Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Non-Magnetic
Opening Depth (D) (in): 15/32 in
Opening Modifier: 6 Point Hex
Overall Length A: 4 in

$96.99

3/4 Female Sq Dr x 3/4 Female Hex Sckt, 4 in OAL, .45 +/-.031 Broach Depth

AX 7524-SPECIAL SOCKET

3/4 Female Sq Dr x 3/4 Female Hex Sckt, 4 in OAL, .45 +/-.031 Broach Depth

$0.00

3/4in Sq. Drive Socket X 7/8in Hex, 4in OAL

AX 7528

SCKT 3/4" SQ DR 7/8" HEX 4" OAL
3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.047 lb
Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-3/8 in

Hex Opening: 7/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 9/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in
Set: No

$78.71

3/4in Sq. Drive Socket X 1-1/8in Hex, 4in OAL

AX 7536

3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-5/8 in
Diameter Nose End (B): 1-5/8 in

Hex Opening: 1-1/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in

$91.80

3/4in Sq. Drive Socket X 1-5/16in Hex, 4in OAL

AX 7542

3/4" Drive - SAE - 6 Point & Double Hex, Thin Wall, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-3/4 in
Diameter Nose End (B): 1-7/8 in

Hex Opening: 1-5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in

$117.64

3/4 Sq. Drive Socket x 7/8

AX 7628

SCKT 3/4" SQ DR 7/8" SQ 2" OAL
3/4" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.893 lb
Diameter Drive End (C): 1-3/4 in
Diameter Nose End (B): 1-3/4 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: Single Square

Overall Length A: 2 in
Set: No

$89.42

SCKT 3/4in SQ DR 15/16in SQARE 2-1/8in OAL

AX 7630

3/4" Drive - SAE - Single Square & Double Square, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 1-3/4 in
Diameter Nose End (B): 1-7/8 in

Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: Single Square

Overall Length A: 2-1/8 in

$109.14

3/8 Sq. Drive Socket X 7mm 6 Pt Hex

AX 7MM03

SCKT 3/8 SQ DR 7MM HEX 22.1MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.057 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 11.1 mm

Hex Opening: 7 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3.0 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$17.45

3/8 Sq. Drive Socket X 7mm Hex

AX 7MM13

SCKT 3/8 SQ DR 7MM HEX 31.8MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.083 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 11.1 mm

Hex Opening: 7 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.7 mm
Set: No

$13.49

3/8 SQ IN, 6 Point

AX 7MM23

SCKT 3/8 SQ DR 7MM HEX 50.8MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.173 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 11.1 mm

Hex Opening: 7 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$18.05

SKT HEX BIT 3/8DR 8MM

AX 80429

SKT HEX BIT 3/8DR 8MM

Call for pricing

1/4in Fem Sq Holder

AX 825

BIT HLDR 1/4 SQ DR 1/4 HEX 1" OAL
1/4" Female Square Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.036 lb
Description: For 1/4" hex inserts

Drive: Female Square
Female Hex Size (in): 1/4 in

Magnetism: Non-Magnetic

Overall Length: 1.0 in, 25.0 mm
Set: No

$10.59

3/8 Sq. Drive Insert X #2 Phillips

AX 832

BIT 3/8 SERV DR #2 PHILLIPS 2-5/8" OAL
Female Square Service Drive - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.077 lb

Drive: Female Square
Fastener Type: Phillips

Overall Length: 2.625 in, 67.0 mm
Point Size: 2
Set: No

$18.22

Socket. 1in Sq. Dr. x 1-5/16 Hex

AX 8542

1" Drive 6 Point SAE Thin Wall Extra Long Length Sockets

Diameter Drive End (C): 2-1/8 in
Diameter Nose End (B): 1-7/8 in

Hex Opening: 1-5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 4-1/4 in

$190.06

BIT 1/2 FM SQ SRV DR T-50TX 2-7/8" 73MM

AX 854-TX-50

BIT 1/2 FM SQ SRV DR T-50 TX 2-7/8" 73MM
Female Square Service Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Service Drive Provides Greater Torque Compared to Driving Using a Bit Holder
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Service Drive Provides Greater Torque Compared to Driving Using a Bit Holder
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.182 lb

Drive: Female Square Drive
Drive Size: T-50
Fastener Type: Torx

Measurement Across Lobes: .346 in

Overall Length: 3.93 in, 100.0 mm
Point Size: 10 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$39.44

1/2 Female Sq. Drive Holder, 5/16 Hex

AX 855

BIT HLDR 1/2 SQ DR 5/16 HEX 1 3/4 OAL
1/2" Female Square Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.198 lb
Description: For 5/16" hex inserts

Drive: Female Square

Long Description: For 5/16" hex inserts
Magnetism: Non-Magnetic

Overall Length: 1.75 in, 44.0 mm
Product Name: Testing Product Name
Set: No

$13.49

1/2 Female Sq. Drive Holder For 1/4 Hex

AX 858

BIT HLDR 1/2 SQ DR 1/4 HEX 1-3/4 OAL
1/2" Female Square Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.080 kg
Description: For 1/4" hex inserts

Drive: Female Square
Female Hex Size (in): 1/4 in

Long Description: For 1/4" hex inserts
Magnetism: Non-Magnetic

Overall Length: 1.75 in, 44.0 mm
Set: No

$13.84

Socket, 1/4in Sq. Dr. 8mm Dbl-Hex

AX 8MM21-D

SCKT 1/4 SQ DR 8MM DBL-HEX 44.5MM OAL
1/4" Drive - Metric - Long Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.056 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: Double Hex

Overall Length A: 44.4 mm
Set: No

$19.71

3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex

AX 7348

3/4" Drive - SAE - 6 Point & Double Hex, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 2-1/8 in
Diameter Nose End (B): 2-1/4 in

Hex Opening: 1-1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in

$117.98