Search
CLECO S10555
CLECO S10555 branded products
Grinder Ergo 1/4 Collet 20,000 rpms
DC 12L2001-01
DC 12L2001-01
GRINDR ERGO,FE,20K,1/4" COLLET12,000 - 25,000 RPM 0.6 hp (0.45 kW)
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
- Ergonomic composite housing
- Front and rear exhaust models available
- OH models include 4' Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
- LH = Left Hand Rotation Version
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
$473.00
Grinder, Straight, 18000Rpm
DC 12L2002-01
DC 12L2002-01
GRINDR ERGO,FE,18K,1/4" COLLET12,000 - 25,000 RPM 0.6 hp (0.45 kW)
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
- Ergonomic composite housing
- Front and rear exhaust models available
- OH models include 4' Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
- LH = Left Hand Rotation Version
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
$589.10
Ra Snd/Grd, Ergo, Re, 18K, 1/4Col
DC 12L2218-36
DC 12L2218-36
RA SND/GRD,ERGO,RE,18K,1/4" COL9,000 RPM 0.6 hp (0.45 kW)
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.76 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable collet, collet wrenches
- Ergonomic composite housing
- Heavy duty low profile head for greater accessibility
- High output motor in a lightweight package
- 3" Extended head available
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.76 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable collet, collet wrenches
$838.50
Sander Attachment
DC 14-1301
DC 14-1301
Sander AttachmentUsed on Cleco Dotco Belt Sanders - 12LF, 12-12 and 12-13 Series
$485.00
12in Belt 50 Grit
DC 14-1345
DC 14-1345
BELT 12" 50G SANDNGUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.70
12in Belt 80 Grit
DC 14-1348
DC 14-1348
BELT 12" 80G SANDNGUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 100 Grit
DC 14-1350
DC 14-1350
BELT 12" 100G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 120 Grit
DC 14-1352
DC 14-1352
BELT 12" 120G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
Belt 12in 180 Grit
DC 14-1358
DC 14-1358
BELT 12" 180G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 240 Grit
DC 14-1360
DC 14-1360
BELT 12" 240G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
2in Saw Blade 22T
DC 14-1890
DC 14-1890
BLADE 2" SAW, 22TUsed on Cleco Dotco Saws
CAUTION: Use only for sawing non-metallic materials
- Used for sawing non-metallic materials
CAUTION: Use only for sawing non-metallic materials
$23.10
2in Saw Blade (44 Teeth)
DC 14-1891
DC 14-1891
BLADE 2" SAW, 44TUsed on Cleco Dotco Saws
CAUTION: Use only for sawing non-metallic materials
- Used for sawing non-metallic materials
CAUTION: Use only for sawing non-metallic materials
$21.10
Lock Ring
DC 14-2082
DC 14-2082
RING, LOCKFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$22.90
Router Nose Housing
DC 14-2176
DC 14-2176
HSG ROUTER NOSEFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$121.00
Housing
DC 14-2177
DC 14-2177
HSG ROUTER NOSEFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$140.00
Router Attachment
DC 14-2187
DC 14-2187
ATCH #1 ROUTERFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$219.00
Router Guide
DC 14-2510
DC 14-2510
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2512
DC 14-2512
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2531
DC 14-2531
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$120.00
Router Guide
DC 14-2539
DC 14-2539
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$162.00
Router Guide
DC 14-2542
DC 14-2542
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$170.00
BLADE SAW, 60T
DC 14-2928
DC 14-2928
BLADE SAW, 60TUsed on Cleco Dotco Saws
- Used on Cleco Dotco Saws
$40.00
Rivet Shaver, Pg, 20K
DC 14CNL60-96
DC 14CNL60-96
RIVET SHAVER,PG,20K14CF 0.4hp / 0.3kW 29000rpm 14CN 0.9hp / 0.75kW 20000rpm
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 3.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mmmm
- 0.00025 or 0.0005 Cutter Adjustment
- Optional Adjustment Guard 02-8150 or Stabilizer 02-8120 are Sold Separately
- Optional Adjustment Guard 02-8150 prevents adjustment by operator - can not be used with Stabilizer tools
- Standard rivet shavers accept skirts for cutters up to 3/4" in diameter - these are sold separately
- -96XL version for 1" and greater skirts.
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 3.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mmmm
$2,000.00
Drill, Inline, Rear Exhaust, 5300 RPM
DC 15LF081-38
DC 15LF081-38
DRILL ST,RE,5.3K,1/4" JACOBS0.4hp / 0.30kW 600-28500rpm
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Minimum Hose I.D.: 1/4in / 6.4mm
- Equipped with Jacobs brand chuck
- Rear Exhaust
- Rear Exhaust standard, optional fron exhaust available
- Safety lever standard
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Minimum Hose I.D.: 1/4in / 6.4mm
$782.60
Rt. Angle Drill, 5600 rpm
DC 15LN288-62
DC 15LN288-62
DRILL ANGLE,RE,5.6K,1/4-28I0.9hp / 0.67kW 470-5600 rpm Ideal for Restricted Access Applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
- Wide array of speeds, head designs, and spindle threads for all applications
- High efficiency motor and geartrain
- -62 1/4in -28 Internal thread standard
- Other terminations available: -61 10-32 Internal Thread -63 Threaded Collet -64 5/16in -24 Internal Thread
- Lock off safety lever standard
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
$1,560.90
SCKT 1/2 FMALE SQ DRV 3/8 FMA
AX 5112-D
AX 5112-D
SCKT 1/2 SQ DR 3/8 DBL-HEX 1-1/2" OAL1/2" Drive - SAE - 6 Point and Double Hex, Standard Length
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.157 lb
- Diameter Drive End (C): 15/16 in
- Diameter Nose End (B): 5/8 in
- Hex Opening: 3/8 in
- Magnetism: Non-Magnetic
- Opening Depth (D) (in): 1/4 in
- Opening Modifier: Double Hex
- Overall Length A: 1-1/2 in
- Set: No
$20.29
Socket, 3/8 Drive 6 Point Standard, 16 MM
GW 80443
GW 80443
Socket, 3/8 Drive 6 Point Standard, 16 MM
$17.82
Ratchet, 1/2 Inch Drive 90 Tooth Flex Head Teardrop 17 Inch
GW 81306T
GW 81306T
Ratchet, 1/2 Inch Drive 90 Tooth Flex Head Teardrop 17 Inch
$100.42
Ratchet, 3/8 Inch Drive 90 Tooth Flex Head Teardrop 11 Inch
GW 81215T
GW 81215T
Ratchet, 3/8 Inch Drive 90 Tooth Flex Head Teardrop 11 Inch
$83.68
Combo Wrench, 12PT Long, 41mm Pattern Satin
GW 81841
GW 81841
Combo Wrench, 12PT Long, 41mm Pattern Satin
$119.59
1/2in DRIVE 18MM STANDARD IMPACT SOCKET
GW 84530N
GW 84530N
1/2in DRIVE 18MM STANDARD IMPACT SOCKET
$0.00
Torque Wrench, 100-600 Ft Lbs 3/4 in Drive
GW 85065
GW 85065
Torque Wrench, 100-600 Ft Lbs 3/4 in Drive
$1,638.32
1/2in Dr. Torque Wrench Electric, 25.1 - 250.8 Ft. Lb.
GW 85077
GW 85077
1/2in Dr. Torque Wrench Electric, 25.1 - 250.8 Ft. Lb.
$450.37
3/4in DR ETW TORQUE WRENCH, 75-700 FT/LB
GW 85082
GW 85082
3/4in DR ETW TORQUE WRENCH, 75-700 FT/LB
$2,414.11
Set Wrench Ratcheting Combo Flex, Metric, 16 PC
GW 9902D
GW 9902D
Set Wrench Ratcheting Combo Flex, Metric, 16 PC
$567.46
1268 PC MTS IN MODULAR TRAYS W/STORAGE
GW MEGAMOD1268
GW MEGAMOD1268
1268 PC MTS IN MODULAR TRAYS W/STORAGE
Call for pricing
247 PC MTS in Modular Trays w/Storage
GW MEGAMOD247
GW MEGAMOD247
247 PC MTS in Modular Trays w/Storage
$4,012.44
Payment options
