Search
CLECO S10555
CLECO S10555 branded products
Pencil Grinder
DC 10R0401-18
DC 10R0401-18
PENCIL GRINDER,60K,1/8" COLLET60,000 RPM 0.1 hp (0.074 kW)
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 0.22 lb
- Industrial bearing provides long life expectancy
- Designed for precision deburring and metal removal
- Compact and light aluminum weight housing
- Roll throttle equipped
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 0.22 lb
$541.80
Router
DC 10T4318-62
DC 10T4318-62
ROUTER,W/BASE,SE,18K,3/8" " K"9,000 - 18,000 RPM 1.7 hp (1.27 kW)
Exhaust: Side
Tool Configuration: Base Mount
Type Housing: Aluminum
Weight (lbs): 7.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
- Roll valve gives easy, convenient operation
- Cool running pneumatic motor - Stays cool even under heavy load
- Easy-to-use thumb throttle can be operated without releaseing hand from handel
- Smooth accurate cuts - assured by precision spindle
- 3/8" Collet Supplied
Exhaust: Side
Tool Configuration: Base Mount
Type Housing: Aluminum
Weight (lbs): 7.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench
$1,599.60
Straight Die Grinder 30, 000
DC 12L1080-36
DC 12L1080-36
GRINDR ERGO,RE,30K,1/4" COLLET12,000 - 34,000 RPM 0.3 hp (0.22 kW)
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.88 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm
- Durable and ergonomic composite housing - Ideal for die/mold and deburring
- Compact size for ultimate control - easy access to confined areas
- OH versions include 4' of Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
- LH = Left Hand Rotation
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.88 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm
$372.38
Buffer, 1/4In. Collet
DC 12L1092-01
DC 12L1092-01
BUFFER ERGO,RE,GR,3200,1/4" COL3,200 - 5,000 RPM 0.3 hp (0.22 kW)
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.54 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/4 in / 6.4 mm Standard Equipment: Applicable collet, collet wrenches
- Ergonomic composite housing
- Parts interchangeable with numerous other Dotco products
- Lightweight and compact design with powerful geared motor
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.54 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/4 in / 6.4 mm Standard Equipment: Applicable collet, collet wrenches
$709.50
Vertical Sander/Grinder, 1/4in collet
DC 12L1382-36
DC 12L1382-36
VERT SNDR/GRD,RE,20K,1/4" E30020,000 - 30,000 RPM 0.3 hp (0.22 kW)
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm
- Composite housing
- Wide array of speeds offered; front and rear exhaust models available
- Suitable for a wide range of finishing and deburring applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm
$735.30
Grinder Ergo 1/4 Collet 20,000 rpms
DC 12L2001-01
DC 12L2001-01
GRINDR ERGO,FE,20K,1/4" COLLET12,000 - 25,000 RPM 0.6 hp (0.45 kW)
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
- Ergonomic composite housing
- Front and rear exhaust models available
- OH models include 4' Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
- LH = Left Hand Rotation Version
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
$473.00
Grinder, Straight, 18000Rpm
DC 12L2002-01
DC 12L2002-01
GRINDR ERGO,FE,18K,1/4" COLLET12,000 - 25,000 RPM 0.6 hp (0.45 kW)
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
- Ergonomic composite housing
- Front and rear exhaust models available
- OH models include 4' Overhose for additional noise suppression
- Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression
- LH = Left Hand Rotation Version
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
$589.10
Ra Snd/Grd, Ergo, Re, 18K, 1/4Col
DC 12L2218-36
DC 12L2218-36
RA SND/GRD,ERGO,RE,18K,1/4" COL9,000 RPM 0.6 hp (0.45 kW)
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.76 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable collet, collet wrenches
- Ergonomic composite housing
- Heavy duty low profile head for greater accessibility
- High output motor in a lightweight package
- 3" Extended head available
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.76 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable collet, collet wrenches
$838.50
Sander Attachment
DC 14-1301
DC 14-1301
Sander AttachmentUsed on Cleco Dotco Belt Sanders - 12LF, 12-12 and 12-13 Series
$485.00
12in Belt 50 Grit
DC 14-1345
DC 14-1345
BELT 12" 50G SANDNGUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.70
12in Belt 80 Grit
DC 14-1348
DC 14-1348
BELT 12" 80G SANDNGUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 100 Grit
DC 14-1350
DC 14-1350
BELT 12" 100G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 120 Grit
DC 14-1352
DC 14-1352
BELT 12" 120G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
Belt 12in 180 Grit
DC 14-1358
DC 14-1358
BELT 12" 180G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
12in Belt 240 Grit
DC 14-1360
DC 14-1360
BELT 12" 240G SANDUsed on Cleco Dotco Belt Sanders
- Minimum order - 10 of any one belt
$4.50
2in Saw Blade 22T
DC 14-1890
DC 14-1890
BLADE 2" SAW, 22TUsed on Cleco Dotco Saws
CAUTION: Use only for sawing non-metallic materials
- Used for sawing non-metallic materials
CAUTION: Use only for sawing non-metallic materials
$23.10
2in Saw Blade (44 Teeth)
DC 14-1891
DC 14-1891
BLADE 2" SAW, 44TUsed on Cleco Dotco Saws
CAUTION: Use only for sawing non-metallic materials
- Used for sawing non-metallic materials
CAUTION: Use only for sawing non-metallic materials
$21.10
Lock Ring
DC 14-2082
DC 14-2082
RING, LOCKFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$22.90
Router Nose Housing
DC 14-2176
DC 14-2176
HSG ROUTER NOSEFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$121.00
Housing
DC 14-2177
DC 14-2177
HSG ROUTER NOSEFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$140.00
Router Attachment
DC 14-2187
DC 14-2187
ATCH #1 ROUTERFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$219.00
Router Guide
DC 14-2510
DC 14-2510
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2512
DC 14-2512
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2531
DC 14-2531
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$120.00
Router Guide
DC 14-2539
DC 14-2539
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$162.00
Router Guide
DC 14-2542
DC 14-2542
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$170.00
BLADE SAW, 60T
DC 14-2928
DC 14-2928
BLADE SAW, 60TUsed on Cleco Dotco Saws
- Used on Cleco Dotco Saws
$40.00
Rivet Shaver, Pg, 20K
DC 14CNL60-96
DC 14CNL60-96
RIVET SHAVER,PG,20K14CF 0.4hp / 0.3kW 29000rpm 14CN 0.9hp / 0.75kW 20000rpm
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 3.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mmmm
- 0.00025 or 0.0005 Cutter Adjustment
- Optional Adjustment Guard 02-8150 or Stabilizer 02-8120 are Sold Separately
- Optional Adjustment Guard 02-8150 prevents adjustment by operator - can not be used with Stabilizer tools
- Standard rivet shavers accept skirts for cutters up to 3/4" in diameter - these are sold separately
- -96XL version for 1" and greater skirts.
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 3.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mmmm
$2,000.00
Drill, Inline, Rear Exhaust, 5300 RPM
DC 15LF081-38
DC 15LF081-38
DRILL ST,RE,5.3K,1/4" JACOBS0.4hp / 0.30kW 600-28500rpm
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Minimum Hose I.D.: 1/4in / 6.4mm
- Equipped with Jacobs brand chuck
- Rear Exhaust
- Rear Exhaust standard, optional fron exhaust available
- Safety lever standard
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Minimum Hose I.D.: 1/4in / 6.4mm
$782.60
Rt. Angle Drill, 5600 rpm
DC 15LN288-62
DC 15LN288-62
DRILL ANGLE,RE,5.6K,1/4-28I0.9hp / 0.67kW 470-5600 rpm Ideal for Restricted Access Applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
- Wide array of speeds, head designs, and spindle threads for all applications
- High efficiency motor and geartrain
- -62 1/4in -28 Internal thread standard
- Other terminations available: -61 10-32 Internal Thread -63 Threaded Collet -64 5/16in -24 Internal Thread
- Lock off safety lever standard
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 2.5 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Air inlet size: 1/4in Standard Equipment: 600 Series Mini Angle Head with 1/4-28 internal thread
$1,560.90
1/4 Sq Drive External Torx Socket X E-4
AX TX-1404
AX TX-1404
SCKT 1/4 SQ DR E4 TORX 1 inch OAL1/4 inch Drive - Torx - For External Torx Screws, Thin Wall
- Weight: 0.027 lb
- Diameter Drive End (C): 1/2 in, 12.7 mm
- Diameter Nose End (B): 1/4 in, 6.4 mm
- Driver Size: E-4
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1 in, 25.4 mm
- Set: No
$22.99
1/4 Sq Drive External Torx Socket X E-8
AX TX-1408
AX TX-1408
SCKT 1/4 SQ DR E8 TORX 1 inch OAL1/4 inch Drive - Torx - For External Torx Screws, Thin Wall
- Weight: 0.031 lb
- Diameter Drive End (C): 1/2 in, 12.7 mm
- Diameter Nose End (B): 3/8 in, 9.5 mm
- Driver Size: E-8
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1 in, 25.4 mm
- Set: No
$31.37
1/4 Sq Drive External Torx Socket X E-10
AX TX-1410
AX TX-1410
SCKT 1/4 SQ DR E10 TORX 1 inch OAL1/4 inch Drive - Torx - For External Torx Screws, Thin Wall
- Weight: 0.036 lb
- Diameter Drive End (C): 1/2 in, 12.7 mm
- Diameter Nose End (B): 1/2 in, 12.7 mm
- Driver Size: E-10
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1 in, 25.4 mm
- Set: No
$31.37
1/2 Drive External Torx Socket X E-14
AX TX-5114
AX TX-5114
SCKT 1/2 SQ DR E14 TORX 1-1/2" OAL1/2" Drive - Torx - For External Torx Screws
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.192 lb
- Diameter Drive End (C): 1 in, 25 mm
- Diameter Nose End (B): 11/16 in, 18 mm
- Driver Size: E-14
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1-1/2 in, 38 mm
- Set: No
$39.61
1/2 Drive External Torx Socket X E-20
AX TX-5120
AX TX-5120
SCKT 1/2 SQ DR E20 TORX 1-1/2" OAL1/2" Drive - Torx - For External Torx Screws
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
- Made in the USA - Quality and Availability
- High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
- Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Weight: 0.072 lb
- Diameter Drive End (C): 1-3/16 in, 30 mm
- Diameter Nose End (B): 1 in, 25 mm
- Driver Size: E-20
- Magnetism: Non-Magnetic
- Opening Modifier: Torx
- Overall Length A: 1-1/2 in, 38 mm
- Set: No
$160.06
U-Guard 3/8 Sq Dr x 10mm Hex
AX UG-10MM03
AX UG-10MM03
SCKT CVRD 3/8 SQ DR 10MM HEX 22.2MM OAL3/8" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 1.382 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 3/8 in
- Fastener End Sex: F
- Fastener End Size: 10 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 10MM03
- Opening Modifier: 6 Point Hex
- Set: No
$77.01
U-Guard 1/4 Sq Dr x 10mm Hex
AX UG-10MM11
AX UG-10MM11
SCKT CVRD 1/4 SQ DR 10MM HEX 26.2MM OAL1/4" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.177 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/4 in
- Fastener End Sex: F
- Fastener End Size: 10 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 10MM11
- Opening Modifier: 6 Point Hex
- Set: No
$72.51
UGuard 1/4 Sq Dr x 10mm Hex
AX UG-10MM21
AX UG-10MM21
SCKT CVRD 1/4 SQ DR 10MM HEX 45.2MM OAL1/4" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.369 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/4 in
- Fastener End Sex: F
- Fastener End Size: 10 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 10MM21
- Opening Modifier: 6 Point Hex
- Set: No
$82.03
SCKT CVRD, 1/4 SQ DR 3/8 Hex, 51 MM OAL
AX UG-1112
AX UG-1112
SCKT CVRD 1/4 SQ DR 3/8 HEX 51MM OAL1/4" Drive SAE u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.049 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/4 in
- Fastener End Sex: F
- Fastener End Size: 3/8 in
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 1112
- Opening Modifier: 6 Point Hex
- Set: No
$67.41
SCKT CVRD, 1/4 SQ DR 7/16 Hex, 1 Inch OAL
AX UG-1114
AX UG-1114
SCKT CVRD 1/4 SQ DR 7/16 HEX 1" OAL1/4" Drive SAE u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.055 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/4 in
- Fastener End Sex: F
- Fastener End Size: 7/16 in
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 1114
- Opening Modifier: 6 Point Hex
- Set: No
$74.55
U-Guard 3/8 Sq Dr x 11mm Hex
AX UG-11MM23
AX UG-11MM23
SCKT CVRD 3/8 SQ DR 11MM HEX 50.8MM OAL3/8" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.020 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 3/8 in
- Fastener End Sex: F
- Fastener End Size: 11 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 11MM23
- Opening Modifier: 6 Point Hex
- Set: No
$85.85
U-Guard 1/2 Sq Dr x 13mm Hex
AX UG-13MM25
AX UG-13MM25
SCKT CVRD 1/2 SQ DR 13MM HEX 58MM OAL1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.019 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/2 in
- Fastener End Sex: F
- Fastener End Size: 13 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 13MM25
- Opening Modifier: 6 Point Hex
- Set: No
$90.10
U-Gurard Socket, 3/8 Fm Sq Dr. x 15mm Fm
AX UG-15MM23
AX UG-15MM23
U-Gurard Socket, 3/8 Fm Sq Dr. x 15mm Fm
$87.64
Socket CVRD 3/8 SQ DR 15MM HEX 23.8MM OAL
AX UG-15MM03
AX UG-15MM03
SCKT CVRD 3/8 SQ DR 15MM HEX 23.8MM OAL3/8" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.023 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 3/8 in
- Fastener End Sex: F
- Fastener End Size: 15 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 15MM03
- Opening Modifier: 6 Point Hex
- Set: No
$90.10
SCKT CVRD 1/2 SQ DR 18MM HEX 38.1MM OAL, 12/Minimum
AX UG-18MM15
AX UG-18MM15
SCKT CVRD 1/2 SQ DR 18MM HEX 38.1MM OAL1/2" Drive Metric u-GUARD Non-Magnetic Covered Sockets
- Weight: 0.018 lb
- Drive End Sex: F
- Drive End Type: Square
- Drive Size: 1/2 in
- Fastener End Sex: F
- Fastener End Size: 18 mm
- Fastener End Type: Hex
- Magnetism: Non-Magnetic
- Metal Socket Number: 18MM15
- Opening Modifier: 6 Point Hex
- Set: No
$93.59
Payment options
