Airpower | CLECO S10555 branded products

SCKT HEAD BIT+ADAP SET, 3/8 SQ DR 5 PC MM 12/Min

AX APH35M

SCKT HEAD BIT+ADAP SET 3/8 SQ DR 5 PC MM
Metric Socket Head Bits with Square Drive Adapters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.150 lb
Description: 5 piece, 3/8" square drive: 4mm, 5mm, 6mm, 8mm, 10mm

Set: Yes

$140.68

SCKT HEAD BIT+ADAP SET, 3/8 SQDR 8 PC SAE, 12/Min

AX APH38

SCKT HEAD BIT+ADAP SET 3/8 SQDR 8 PC SAE
SAE Socket Head Bit & Adapter Sets

Made in the USA - quality and availability
Special steel and heat treatment process increase mechanical strength and extend bit life
Modern machining process results in tighter tolerances and better product consistency
Better and more consistent fit to fastener tabs for better torque transfer

Made in the USA - quality and availability
Special steel and heat treatment process increase mechanical strength and extend bit life
Modern machining process results in tighter tolerances and better product consistency
Better and more consistent fit to fastener tabs for better torque transfer

Weight: 0.060 lb
Description: 8 pieces, 3/8 square drive: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Set: Yes

$300.05

1/4 Male Sq. Hex Extension X 4, Ball

AX EX-250-B-4

EXT 1/4 MALE HEX DR 1/4 SQ 4 OAL BALL
Male Hex Drive with 1/4" Male Square - Hex Extensions

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.076 lb
Description: male hex to male sq

Hex Drive: 1/4 in

Magnetism: Non-Magnetic

Overall Length: 4.0 in, 102.0 mm
Set: No

$13.29

1/4 Male Sq. Hex Extension X 5, Ball, 12/Min

AX EX-250-B-5

EXT 1/4 MALE HEX DR 1/4 SQ 5 OAL BALL
Male Hex Drive with 1/4" Male Square - Hex Extensions

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.098 lb
Description: male hex to male sq

Hex Drive: 1/4 in

Magnetism: Non-Magnetic

Overall Length: 5.0 in, 127.0 mm
Set: No

$15.24

Extension, 1/4 Sq Dr x 4 In, Pin

AX EX-255-4

EXT 1/4 SQ DR 1/4 SQ 4 OAL
1/4" Drive - 7/8" to 14" (22mm to 356mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.095 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 1/4 in

Overall Length: 4.0 in, 102.0 mm
Set: No

$27.29

Adapter, 3/8 Male to 1/2 Female

AX EX-377-B-12

ADAP 1/2" SQ DR 3/8" SQ 12" OAL BALL LOCK
1/2" Drive 1/4" to 5/8" Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.018 lb
Description: Female sq. to Male sq.

Female Square (in): 1/2 in

Male Square Drive (in): 3/8 in

Overall Length: 12.0 in, 305.0 mm
Set: No

$62.39

1/4 Sq. Drive Socket X 1/2 6 Pt Hex FL

AX FL-1116

SCKT 1/4 SQ DR 1/2 FL-HEX 1" OAL
1/4" Drive - SAE - Surface Drive & Fast Lead, Standard & Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.076 lb
Diameter Drive End (C): 11/16 in
Diameter Nose End (B): 11/16 in

Hex Opening: 1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: Fast Lead

Overall Length A: 1 in
Set: No

$41.31

SCKT 1/2 SQ DR 16MM FL-HEX 38.1MM OAL

AX FL-16MM15

SCKT 1/2 SQ DR 16MM FL-HEX 38.1MM OAL

$69.02

Socket, 3/8 SQ. DR. , 3/8 FL-Hex, 7/8 OAL

AX FL-3012

SCKT 3/8 SQ DR 3/8 FL-HEX 7/8 OAL
3/8" Drive - SAE - Surface Drive & Fast Lead, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.060 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 19/32 in

Hex Opening: 3/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: Fast Lead

Overall Length A: 7/8 in
Set: No

$42.33

3/8 Sq Drive Socket X 9/16 6 Pt Hex FL

AX FL-3018

SCKT 3/8 SQ DR 9/16 FL-HEX 7/8 OAL
3/8" Drive - SAE - Surface Drive & Fast Lead, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.087 lb
Diameter Drive End (C): 7/8 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/16 in
Opening Modifier: Fast Lead

Overall Length A: 7/8 in
Set: No

$64.60

3/8 Sq Drive Socket X 9/16 6 Pt Hex FL

AX FL-3118

SCKT 3/8 SQ DR 9/16 FL-HEX 1-1/2" OAL
3/8" Drive - SAE - Surface Drive & Fast Lead, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.151 lb
Diameter Drive End (C): 7/8 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Fast Lead

Overall Length A: 1-1/2 in
Set: No

$41.06

1/4 Sq. Drive Socket X 5/16 6 Pt Hex

AX HA-510

SCKT 1/4 SQ DR 5/16 HEX 7/8 OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.019 lb
Diameter Drive End (C): 7/16 in
Diameter Nose End (B): 7/16 in

Hex Opening: 5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$11.76

AX HTN-B-4

BIT 1/4 HEX INS #4 SLOT 1-3/16 inch 30MM OAL
1/4 inch Hex Insert Bits - Hi-Torque Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.038 lb
Blade Width: 0.502 in

Fastener Type: Hi-Torque

Overall Length: 1.25 in
Recess: 4
Set: No
SKU Group Note: Hi-Torque-Rudy Vaughn, Licensor

$35.36

1/4 Hi-Torque Sq Insert Bit X #1 Recess

AX HTS-1

BIT 1/4 SQ SRV DR #1 HTRQ 1 inch 25MM OAL
1/4 inch Drive Hi-Torque Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.033 lb
Blade Width: 0.274 in
Body Diameter (D): 1/2 in

Fastener Type: Hi-Torque

Overall Length: 1.0 in
Recess: 1
Set: No
SKU Group Note: Hi-Torque-Rudy Vaughn, Licensor

Call for pricing

1/4 Hi-Torque Sq Insert Bit X #2 Recess

AX HTS-2

BIT 1/4 SQ SRV DR #2 HTRQ 1 inch 25MM OAL
1/4 inch Drive Hi-Torque Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.033 lb
Blade Width: 0.295 in
Body Diameter (D): 1/2 in

Fastener Type: Hi-Torque

Overall Length: 1.0 in
Recess: 2
Set: No
SKU Group Note: Hi-Torque-Rudy Vaughn, Licensor

Call for pricing

Unv Wrench, 3/8in Sq. Dr. 9/16 Hex, 7-1/32in OAL, 12/Min

AX KA-105-6

UNV WRNCH 3/8 SQ DR 9/16 HEX 7-1/32" OAL
3/8in Drive 6 Point Metric IronBand Hex Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.459 lb
Clearance Depth (E): 9/16 in
Diameter Nose End (D): 13/16 in

Hex Opening: 9/16 in

Set: No
Shank Length (A): 6 in

$98.43

Unv Wrench, 3/8in Sq. Dr. 3/8 Hex, 6-7/8in OAL, 12/Min

AX KA-43-6

UNV WRENCH 3/8 SQ DR 3/8 HEX 6-7/8" OAL
3/8in Drive 6 Point Metric IronBand Hex Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.411 lb
Clearance Depth (E): 7/16 in
Diameter Nose End (D): 17/32 in

Hex Opening: 3/8 in

Set: No
Shank Length (A): 6 in

$90.44

Unv Wrench, 3/8in Sq. Dr. 1/2 Hex, 6-59/64in OAL, 12/Min

AX KA-45-6

UNV WRNCH 3/8 SQ DR 1/2 HEX 6-59/64" OAL
3/8in Drive 6 Point Metric IronBand Hex Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.416 lb
Clearance Depth (E): 1/2 in
Diameter Nose End (D): 11/16 in

Hex Opening: 1/2 in

Set: No
Shank Length (A): 6 in

$103.62

3/8 Sq Drive Universal Wrench X13mm Hex

AX KA-7-13M-6

UNV WRENCH 3/8 SQ DR 13MM HEX 178.6MM
3/8in Drive 6 Point Metric Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Maximum operating angle is 30 degree .

Weight: 0.481 lb
Clearance Depth (E): 11.9 mm
Diameter Nose End (D): 17.5 mm

Hex Opening: 13 mm

Set: No
Shank Length (A): 152 mm

$138.13

UNV WRNCH STANDARD 1/4 MALE HE

AX KC-105-6

UNV WRNCH 1/4 HEX DR 9/16 HEX 7-1/32 OAL
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.019 lb
Clearance Depth (E): 9/16 in

Hex Opening: 9/16 in

Nose End Diameter (D): 13/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$82.54

1/4 Sq Drive Universal Wrench X 5/16 Hex

AX KC-26-6

UNV WRNCH 1/4 HEX DR 5/16 HEX 6-51/64OAL
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.203 lb
Clearance Depth (E): 3/8 in

Hex Opening: 5/16 in

Nose End Diameter (D): 7/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$71.49

UNV WRNCH STANDARD 1/4 MALE HE

AX KC-27-6

UNV WRENCH 1/4 HEX DR 11/32 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.204 lb
Clearance Depth (E): 3/8 in

Hex Opening: 11/32 in

Nose End Diameter (D): 1/2 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$89.93

1/4 Sq Drive Universal Wrench X 7/16 Hex

AX KC-29-6

UNV WRENCH 1/4 HEX DR 7/16 HEX 6-59/64
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.209 lb
Clearance Depth (E): 1/2 in

Hex Opening: 7/16 in

Nose End Diameter (D): 5/8 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$76.08

Universal Wrench 1/4 Hex Dr. 8MM Hex

AX KC-6-8M-6

UNV WRENCH 1/4 HEX DR 8MMHEX 172.5MM OAL
1/4" Drive 6 Point Metric Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.035 lb
Clearance Depth (E): 7.9 mm

Hex Opening: 8 mm

Nose End Diameter (D): 11.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$124.53

AX KDW-C-104-12

UNV WRENCH 3/8 SQ DR 1/2 HEX 13-1/8" OAL
3/8in Drive 6 Point SAE IronBand Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.199 lb
Clearance Depth (E): 9/16 in
Diameter Nose End (D): 3/4 in

Hex Opening: 1/2 in

Overall Length A: 12 in
Set: No
Shank Length (A): 12 in

$212.16

1/2 Sq Drive Universal Wrench, 1/2 Sq, 7-17/32in OAL

AX KNM-50-6

UNV WRENCH 1/2 SQ DR 1/2 SQ 7-17/32 inch OAL
1/2 inch Drive 1/2 inch Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Weight: 0.710 lb

Female Square (in): 1/2 in

Largest Diameter: 1 in, 25 mm
Male Square Drive (in): 1/2 in

Set: No

$190.06

Universal Wrench, Tension Type 1/4 Hex Dr. 5/16 Hex 6-51/64

AX KS-26-6

UN WRNH TENS 1/4 HEX DR 5/16 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.223 lb
Clearance Depth (E): 3/8 in

Hex Opening: 5/16 in

Nose End Diameter (D): 7/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$88.57

1/4 Male Universal Wrench X 8mm Hex

AX KS-6-8M-6

1/4 Male Universal Wrench X 8mm Hex

$118.75

1/4 Male Universal Wrench x 13MM Hex

AX KS-7-13M-9

1/4 Male Universal Wrench x 13MM Hex

$155.81

UNV WRNCH STANDARD 7/16 MALE H

AX KT-6-10M-6

UNV WRENCH 7/16 HEX DR 10MM HEX 173.8MM
7/16" Drive 6 Point Metric Hex Universal Wrench Extensions

Actual design of universal wrenches may not be exactly like pictures above.

Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.404 lb
Clearance Depth (E): 9.5 mm

Hex Opening: 10 mm

Nose End Diameter (D): 15.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$113.31

1/4 Hex Slotted Bit X 5F-6R X 3-3/4

AX L-320X

BIT 1/4 PWRDRW/SL 5F-6R SLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.066 lb
Body Diameter: .193 in, 4.9 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 5F-6R
Set: No

$16.44

1/4 Square Drive Socket, 10MM Hex 44.5MM OAL Magnetic

AX M-10MM21

SCKT 1/4 SQ DR 10MM HEX 44.5MM OAL MAG
1/4" Drive - Metric - Magnetic, Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.110 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$33.66

3/8 Sq Drive Socket X 10mm Hex X 31.8mm

AX M-10MM13

SCKT 3/8 SQ DR 10MM HEX 31.8MM OAL MAG
3/8" Drive - Metric - Magnetic, Short & Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.103 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.8 mm
Set: No

$22.08

AX M-13MM25

SCKT 1/2 SQ DR 13MM HEX 57.2MM OAL MAG
1/2" Drive - Metric - Magnetic, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.299 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 22.2 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 57.1 mm
Set: No

$44.97

3/8 Sq Drive Socket X 13mm 6 Pt Hex (M)

AX M-13MM43

SCKT 3/8 SQ DR 13MM HEX 38.1MM OAL MAG
3/8" Drive - Metric - Magnetic, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.125 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 19.1 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$29.92

Hand Driver, 1/4 Bit HLDR 8-1/2in

AX M-1500-P

HAND DRIVER 1/4 BIT HLDR 8-1/2in 16MM OAL
Replaceable Bit Drivers Magnetic - Hand Drivers

Weight: 0.270 lb
Blade Projection: 4-3/8 in, 111 mm

Female Hex Size (in): 1/4 in

Magnetism: Magnetic

Overall Length: 8.5 in, 216.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$18.85

1/4 Sq. Drive Socket X 3/16 6 Pt Hex

AX M1P06

SCKT 1/4 SQ DR 3/16 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.030 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 5/16 in

Hex Opening: 3/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$24.28

1/4 Sq. Drive Socket X 5/16 6 Pt Hex

AX M1P10

SCKT 1/4 SQ DR 5/16 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.033 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$14.54

1/4 Sq. Drive Socket X 3/8 6 Pt Hex

AX M1P12

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.068 lb
Diameter Drive End (C): 5/8 in
Diameter Nose End (B): 5/8 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$19.28

3/8in Drive Socket

AX M-3110

SCKT 3/8 SQ DR 5/16 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.090 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/4 in
Set: No

$23.45

1/4 Hex Slotted Drive Bit X 6-F-8R

AX M-320X

BIT 1/4 PWRDRW/SL 6F-8R SLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.087 lb
Body Diameter: .241 in, 6.12 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 6F-8R
Set: No

$17.15

MAG. BIT-HOLDER 1/4 MALE HEX D

AX M-490-10

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 10" OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.237 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 10.0 in, 254.0 mm
Set: No

$47.35

3/8in Square Drive, 1/4 Hex, 1-1/4 OAL Mag, Socket

AX M-3108

SCKT 3/8 SQ DR 1/4 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.089 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 7/16 in

Hex Opening: 1/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/4 in
Set: No

$24.06

3/8in Drive Socket

AX M-3116

SCKT 3/8 SQ DR 1/2 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.154 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 13/16 in

Hex Opening: 1/2 in
Magnetism: Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$24.21

3/8in Drive Socket

AX M-3118

SCKT 3/8 SQ DR 9/16 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.180 lb
Diameter Drive End (C): 7/8 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$25.84

1/4 Hex Drive Bit Holder X 3-3/32

AX M-497

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 3 1/16
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.068 lb
Description: Magnetic, 3/8" (9.5mm) reduced dia.

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 3.09 in, 79.0 mm
Set: No

$26.95

1/4 Sq. Drive Socket X 7/32 6 Pt Hex

AX M1P07

SCKT 1/4 SQ DR 7/32 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.031 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 7/32 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$23.31

1/4 Hex Drive Bit Holder X 3-1/16

AX M-498

MAG BIT HLDR 1/4 HEX DR 5/16 HEX 3-3/16
1/4" Hex Drive for 5/16" Hex Inserts - Bit Holders

Weight: 0.142 lb
Description: Magnetic

Magnetism: Magnetic

Overall Length: 3.06 in, 78.0 mm
Set: No

$53.47

MAG. BIT-HOLDER 1/4 MALE HEX D

AX M-490-12

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 12" OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.271 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 12.0 in, 304.0 mm
Set: No

$65.03

1/4 Sq Drive Socket X 5.5mm 6 Pt Hex (M)

AX M-5.5MM11

SCKT 1/4 SQ DR 5.5MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.030 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 9.5 mm

Hex Opening: 5.5 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$23.54

1/2 Sq. Drive Socket X 7/8 6 Pt Hex

AX M-5124

SCKT 1/2 SQ DR 3/4 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.292 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$85.68

1/2 Sq. Drive Socket X 9/16 6 Pt Hex (M

AX M-5118

SCKT 1/2 SQ DR 9/16 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.191 lb
Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$35.70

1/4 Sq. Drive Socket X 5mm 6 Pt Hex (M)

AX M-5MM11

SCKT 1/4 SQ DR 5MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.030 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 8.7 mm

Hex Opening: 5 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$21.17

1/4 Sq. Drive Socket X 6mm 6 Pt Hex (M)

AX M-6MM11

SCKT 1/4 SQ DR 6MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.027 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 9.5 mm

Hex Opening: 6 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$22.62

1/4in Hex Nutsetter

AX M6N-0808-3

NUTSET 1/4 M HEX PWR DR 1/4 HEX 3OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.066 lb

Magnetism: Magnetic

Overall Length: 3.0 in
Set: No
Size: 1/4 in

$32.47

Nut Setter, 1/4in

AX M6N-0810-5

NUTSET 1/4 M HEXPWRDR 5/16 HEX 5 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.119 lb

Magnetism: Magnetic

Overall Length: 5.0 in
Set: No
Size: 5/16 in

$37.74

1/4 Hex Power Drive Nutsetter X 10mm

AX M6N-08-10M-3

NUTSET 1/4MHXPWR DR 10MMHEX 76MM OAL MAG
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.084 lb

Magnetism: Magnetic

Overall Length: 76.0 mm
Set: No
Size: 10 mm

$40.97

1/4in Hex Nutsetter

AX M6N-0814-3

NUTSET 1/4 M HEXPWRDR 7/16 HEX 3 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.100 lb

Magnetism: Magnetic

Overall Length: 3.0 in
Set: No
Size: 7/16 in

$39.61

Nutsetter 1/4 M HEX PWR DR 1/2 HEX 2 In, Mag

AX M6N-0816-2

NUTSET 1/4 M HEX PWR DR 1/2 HEX 2OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.102 lb

Magnetism: Magnetic

Overall Length: 2.0 in
Set: No
Size: 1/2 in

$39.61

Nut Setter 1/4 Male Hex Drv

AX M6N-0816-3

NUTSET 1/4 M HEX PWRDR 1/2 HEX 3 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.127 lb

Magnetism: Magnetic

Overall Length: 3.0 in
Set: No
Size: 1/2 in

$41.14

1/4in Hex Dr., 6-Point Magnetic 76.0MM

AX M6N-08-8M-3

NUTSET 1/4 MHXPWRDR 8MM HEX 76MM OAL MAG
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.076 lb

Magnetism: Magnetic

Overall Length: 76.0 mm
Set: No
Size: 8 mm

$33.75

1/4 Sq Drive Socket

AX M-7MME1

SCKT 1/4 SQ DR 7MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - 6 Point and 6 Point Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
MR-7mmE1 has stronger magnet

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
MR-7mmE1 has stronger magnet

Weight: 0.034 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 11.1 mm

Hex Opening: 7 mm
Magnetism: Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$18.48

MAG BIT HLDR 3/8 SQ DR 5/16HEX 2 47/64

AX M-835

MAG BIT HLDR 3/8 SQ DR 5/16HEX 2 47/64
3/8" Female Square Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.206 lb
Description: For 5/16" hex inserts, magnetic

Magnetism: Magnetic

Overall Length: 2.75 in, 70.0 mm
Set: No

$66.47

1/2 Hex Sq Drive Holder For 1/4 Hex Bit

AX M-858

MAG BIT HLDR 1/2 SQ DR 1/4 HEX 2 5/8 OAL
1/2" Female Square Drive - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.236 lb
Description: For 1/4" hex inserts, magnetic

Female Hex Size (in): 1/4 in

Long Description: For 1/4" hex inserts, magnetic
Magnetism: Magnetic

Overall Length: 2.75 in, 70.0 mm
Set: No

$58.74

1/4 Sq Drive Socket X 8mm Hex X 25.4mm

AX M-8MM11

SCKT 1/4 SQ DR 8MM HEX 25MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.038 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 25.4 mm
Set: No

$19.83

1/4in Drive Socket, 8MM Magnetic Long Length

AX M-8MM21

SCKT 1/4 SQ DR 8MM HEX 44.5MM OAL MAG
1/4" Drive - Metric - Magnetic, Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.067 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$35.79

1/4 Sq. Drive Socket X 1/4 6 Pt Hex

AX MB-1208

SCKT 1/4 SQ DR 1/4 HEX 1-3/4 OAL MB
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.067 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 1/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$30.43

1/4 Sq. Drive Socket X 5/16 6 Pt Hex

AX MB-1210

SCKT 1/4 SQ DR 5/16 HEX 1-3/4 OAL MB
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.067 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$29.24

1/4 Sq. Drive Socket X 11/32 6 Pt Hex

AX MB-1211

SCKT 1/4 SQ DR 11/32 HEX 1-3/4 OAL MB
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.085 lb
Diameter Drive End (C): 9/16 in
Diameter Nose End (B): 9/16 in

Hex Opening: 11/32 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$29.84

1/4 Sq. Drive Socket X 3/8 6 Pt Hex

AX MB-1212

SCKT 1/4 SQ DR 3/8 HEX 1-3/4 OAL MB
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.084 lb
Diameter Drive End (C): 9/16 in
Diameter Nose End (B): 9/16 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$30.35

3/8 Sq Drive Socket

AX MB-12MM23

SCKT 3/8 SQ DR 12MM HEX 50.8MM OAL MB
3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.174 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 19.1 mm

Hex Opening: 12 mm
Magnetism: Magnetic

Opening Depth (D) (in): 7.2 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$40.89

1/4 Sq. Drive Socket X 3/8 6 Pt Hex

AX MB-1312

SCKT 1/4 SQ DR 3/8 HEX 3 OAL MB
1/4" Drive - SAE - Magnetic, Long & Extra Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.045 lb
Diameter Drive End (C): 9/16 in
Diameter Nose End (B): 9/16 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 3 in
Set: No

$100.30

3/8 Sq Drive Socket X 13mm Hex X 50.8mm

AX MB-13MM23

SCKT 3/8 SQ DR 13MM HEX 50.8MM OAL MB
3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.197 lb
Diameter Drive End (C): 20.6 mm
Diameter Nose End (B): 20.6 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$38.08

1/2 Sq. Drive Socket X 17mm 6 Pt Hex

AX MB-17MM23

SCKT 3/8 SQ DR 17MM HEX 50.8MM OAL MB
3/8" Drive - Metric - Magnetic, 6 Point & Double Hex Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.305 lb
Diameter Drive End (C): 25.4 mm
Diameter Nose End (B): 25.4 mm

Hex Opening: 17 mm
Magnetism: Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$51.85

SCKT 3/8 FMALE SQ DRV 3/8 FMA

AX MB-3212

SCKT 3/8 SQ DR 3/8 HEX 2" OAL MB
3/8" Drive - SAE - Magnetic, Long Length & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.176 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 19/32 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$35.96

3/8 Sq. Drive Socket X 1/2 6 Pt Hex

AX MB-3216

SCKT 3/8 SQ DR 1/2 HEX 2" OAL MB
3/8" Drive - SAE - Magnetic, Long Length & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.197 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 13/16 in

Hex Opening: 1/2 in
Magnetism: Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$37.40

1/4 Sq. Drive Socket X 8mm 6 Pt Hex

AX MB-8MM21

SCKT 1/4 SQ DR 8MM HEX 44.5MM OAL MB
1/4" Drive - Metric - Magnetic, Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.069 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$37.49

1/4 Hex Power Drive Nutsetter X 1/4

AX MDA-08

NUTSET 1/4 MALEHXDR 1/4HEX 1-3/4 OAL MAG
1/4" Drive 6 Point Power Drive SAE Hex Nutsetters for Sheet Metal Screws

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.041 lb
Description: Magnetic

Magnetism: Magnetic

Overall Length: 1.75 in
Set: No
Size: 1/4 in

$14.50

1/4 Hex Power Drive Nutsetter X 10mm

AX MDA-10MM

1/4 Hex Power Drive Nutsetter X 10mm

$15.33

1/4 Hex Power Drive Nutsetter X 7mm

AX MDA-7MM

1/4 Hex Power Drive Nutsetter X 7mm

$12.75

1/4 Hex Power Drive Nutsetter X 8mm

AX MDA-8MM

1/4 Hex Power Drive Nutsetter X 8mm

$13.90

1/4 Hex Power Drive Nutsetter X 3/8

AX MDB-12

NUTSET 1/4MALEHXDR 3/8 HX 2-9/16 OAL MAG
1/4" Drive 6 Point Power Drive SAE Hex Nutsetters for Sheet Metal Screws

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.076 lb
Description: Magnetic

In Column Note 2: 5/16" Shank Diameter
Magnetism: Magnetic

Overall Length: 2.56 in
Set: No
Size: 3/8 in

$17.64

Metal Ret Ring

AX MET-1401C

CLIP, RETAINING
Metal Ring

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.002 lb

Drive: 1/2" Square

Set: No

$8.38

Metal Ret Ring

AX MET-1402C

CLIP, RETAINING
Metal Ring

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.098 lb

Drive: 1/2" Square

Set: No

$8.38

Metal Ret Ring, 3/4 sq dr

AX MET-1600C

CLIP, RETAINING
Metal Ring

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.004 lb

Drive: 3/4" Square

Set: No

$11.85

1/4 Sq. Drive Universal Adapter, Ball

AX MF-25-B

UNV WRENCH 1/4 SQ DR 1/4 SQ 1-41/64 inch OAL
1/4 inch Drive - Male Square to Female Square

Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Weight: 0.066 lb

Female Square (in): 1/4 in

Largest Diameter: 5/8 in, 16 mm
Male Square Drive (in): 1/4 in

Overall Length: 1.625 in, 41.0 mm
Set: No

$58.06

3/8 Sq. Drive Universal Adapter, Pin

AX MF-37

UNV WRENCH 3/8 SQ DR 3/8 SQ 2-13/64" OAL
3/8in Drive - Male Square to Female Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.156 lb

Female Square (in): 3/8 in

Largest Diameter: 3/4 in, 19 mm
Male Square Drive (in): 3/8 in

Overall Length: 2.125 in, 54.0 mm
Set: No

$64.35

Universal Wrench, 3/8 Sq. Dr., 3/8 Sq., 2-13/64 OAL

AX MF-37-B

UNV WRENCH 3/8 SQ DR 3/8 SQ 2-13/64 OAL
3/8in Drive - Male Square to Female Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.157 lb

Female Square (in): 3/8 in

Largest Diameter: 3/4 in, 19 mm
Male Square Drive (in): 3/8 in

Overall Length: 2.125 in, 54.0 mm
Set: No

$63.92

1/2 Sq. Driver Universal Adapter, Pin

AX MF-39

UNV WRENCH 1/2 SQ DR 3/8 SQ 2-17/32 inch OAL
1/2 inch Drive 3/8 inch to 3/4 inch Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is30 degrees.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is30 degrees.

Weight: 0.012 lb

Female Square (in): 1/2 in

Largest Diameter: 7/8 in, 22 mm
Male Square Drive (in): 3/8 in

Overall Length: 2.56 in, 65.0 mm
Set: No

$106.59

Universal Wrench

AX MF-50-B

Universal Wrench

$79.22

Nutsetter, 5/16 Hex, Magnetic

AX MHM-1710-4

NUTSET 1/4 MALEHXPWRDR 5/16 HEX 4OAL MAG
1/4" Drive 6 Point SAE Hex Nutsetters for Sheet Metal Screws

Weight: 0.068 lb
Description: Magnetic

Magnetism: Magnetic

Overall Length: 4.0 in
Set: No
Size: 5/16 in

$66.98

1/4 Sq Dr E10 TORX 1in OAL MAG, 12 Pc Minimum

AX MTX-1110

1/4 Sq Dr E10 TORX 1in OAL MAG, 12 Pc Minimum

$109.48

Sckt, 3/8 Sq Dr, E14 Torx, 1-1/4OAL, Mag., 12 Minimum

AX MTX-3414

SCKT 3/8 SQ DR E14 TORX 1-1/4 OAL MAG
3/8" Drive - Torx - For External Torx Screws, Thin Wall, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Weight: 0.037 lb
Diameter Drive End (C): 3/4 in, 19 mm
Diameter Nose End (B): 5/8 in, 16 mm

Driver Size: E-14

Magnetism: Magnetic

Opening Modifier: Torx

Overall Length A: 1-1/4 in, 32 mm
Set: No

$83.13

Impact Socket, Covered, 1/2F Sq Drv, 15/16F

AX NC-5130

Impact Socket, Covered, 1/2F Sq Drv, 15/16F

$221.34

Bit 7/16 Hex Insert Dr 7/16in M SQ 1-1/4in, 32MM, 25/minimum

AX P-1414

BIT 7/16 HEXINS DR 7/16" M SQ 1-1/4" 32MM
1/4" to 1/2" Male Square - Male Square Inserts for Pipe Plugs

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.063 lb

Fastener Type: Square

Male Square Drive (in): 7/16 in

Overall Length: 1.25 in, 32.0 mm
Set: No

$69.96

1/4 Hex Power Drive Slotted Bit X 8F-10R

AX P-320X

BIT 1/4HXPWRDRW/SL8F-10RSLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.108 lb
Body Diameter: .290 in, 7.37 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 8F-10R
Set: No

$18.28

Quick Release Chuck

AX QR-314

QR CHUCK 3/8 SQ DR 7/16 HEX 2" OAL
Female Square Drive, Quick Releasing Chucks - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.210 lb

Hex Open. (A): 7/16 in
Magnetism: Non-Magnetic

Opening Depth (F): 1-3/32 in, 28 mm

Set: No
Sleeve Diameter (E): 1-1/4 in, 32 mm

$76.76

1/4 Hex Power Drive Quick Release

AX QR-M-490-A

MAG BITHLDR 1/4 HEXDR 1/4 HEX 2-57/64 QR
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.092 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 2.9 in, 74.0 mm
Set: No

$33.49

1/4 Hex Power Drive Quick Release 6 OAL

AX QR-M-490-A6

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.160 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 6.0 in, 152.0 mm
Set: No

$108.46

Bearing

RT 92020046

Bearing

$66.00