Airpower | CLECO S10555 branded products

UNV WRNCH STANDARD 1/4 MALE HE

AX KC-27-6

UNV WRENCH 1/4 HEX DR 11/32 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.204 lb
Clearance Depth (E): 3/8 in

Hex Opening: 11/32 in

Nose End Diameter (D): 1/2 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$89.93

1/4 Sq Drive Universal Wrench X 7/16 Hex

AX KC-29-6

UNV WRENCH 1/4 HEX DR 7/16 HEX 6-59/64
1/4 inch Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.209 lb
Clearance Depth (E): 1/2 in

Hex Opening: 7/16 in

Nose End Diameter (D): 5/8 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

$76.08

Universal Wrench 1/4 Hex Dr. 8MM Hex

AX KC-6-8M-6

UNV WRENCH 1/4 HEX DR 8MMHEX 172.5MM OAL
1/4" Drive 6 Point Metric Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.035 lb
Clearance Depth (E): 7.9 mm

Hex Opening: 8 mm

Nose End Diameter (D): 11.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$124.53

AX KDW-C-104-12

UNV WRENCH 3/8 SQ DR 1/2 HEX 13-1/8" OAL
3/8in Drive 6 Point SAE IronBand Universal Wrench Extensions

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.199 lb
Clearance Depth (E): 9/16 in
Diameter Nose End (D): 3/4 in

Hex Opening: 1/2 in

Overall Length A: 12 in
Set: No
Shank Length (A): 12 in

$212.16

1/2 Sq Drive Universal Wrench, 1/2 Sq, 7-17/32in OAL

AX KNM-50-6

UNV WRENCH 1/2 SQ DR 1/2 SQ 7-17/32 inch OAL
1/2 inch Drive 1/2 inch Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees. Standard lengths are 3inch , 6 inch , 9inch and 12 inch (76, 152, 229 and 305mm).

Weight: 0.710 lb

Female Square (in): 1/2 in

Largest Diameter: 1 in, 25 mm
Male Square Drive (in): 1/2 in

Set: No

$190.06

Universal Wrench, Tension Type 1/4 Hex Dr. 5/16 Hex 6-51/64

AX KS-26-6

UN WRNH TENS 1/4 HEX DR 5/16 HEX 6-51/64
1/4" Drive 6 Point SAE Hex Universal Wrench Extensions

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.223 lb
Clearance Depth (E): 3/8 in

Hex Opening: 5/16 in

Nose End Diameter (D): 7/16 in

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$88.57

1/4 Male Universal Wrench X 8mm Hex

AX KS-6-8M-6

1/4 Male Universal Wrench X 8mm Hex

$118.75

1/4 Male Universal Wrench x 13MM Hex

AX KS-7-13M-9

1/4 Male Universal Wrench x 13MM Hex

$155.81

UNV WRNCH STANDARD 7/16 MALE H

AX KT-6-10M-6

UNV WRENCH 7/16 HEX DR 10MM HEX 173.8MM
7/16" Drive 6 Point Metric Hex Universal Wrench Extensions

Actual design of universal wrenches may not be exactly like pictures above.

Actual design of universal wrenches may not be exactly like pictures above.

Weight: 0.404 lb
Clearance Depth (E): 9.5 mm

Hex Opening: 10 mm

Nose End Diameter (D): 15.1 mm

Set: No
Shank Length (A): 6 in, 152 mm
SKU Group Note: Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

$113.31

1/4 Hex Slotted Bit X 5F-6R X 3-3/4

AX L-320X

BIT 1/4 PWRDRW/SL 5F-6R SLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.066 lb
Body Diameter: .193 in, 4.9 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 5F-6R
Set: No

$16.44

1/4 Square Drive Socket, 10MM Hex 44.5MM OAL Magnetic

AX M-10MM21

SCKT 1/4 SQ DR 10MM HEX 44.5MM OAL MAG
1/4" Drive - Metric - Magnetic, Long Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.110 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 44.4 mm
Set: No

$33.66

3/8 Sq Drive Socket X 10mm Hex X 31.8mm

AX M-10MM13

SCKT 3/8 SQ DR 10MM HEX 31.8MM OAL MAG
3/8" Drive - Metric - Magnetic, Short & Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.103 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 16.8 mm

Hex Opening: 10 mm
Magnetism: Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 31.8 mm
Set: No

$22.08

AX M-13MM25

SCKT 1/2 SQ DR 13MM HEX 57.2MM OAL MAG
1/2" Drive - Metric - Magnetic, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
M- Sockets Contain Fixed Magnet, MB- Sockets Contain Spring Loaded Bolt Clearance Magnets

Weight: 0.299 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 22.2 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 57.1 mm
Set: No

$44.97

3/8 Sq Drive Socket X 13mm 6 Pt Hex (M)

AX M-13MM43

SCKT 3/8 SQ DR 13MM HEX 38.1MM OAL MAG
3/8" Drive - Metric - Magnetic, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.125 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 19.1 mm

Hex Opening: 13 mm
Magnetism: Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$29.92

Hand Driver, 1/4 Bit HLDR 8-1/2in

AX M-1500-P

HAND DRIVER 1/4 BIT HLDR 8-1/2in 16MM OAL
Replaceable Bit Drivers Magnetic - Hand Drivers

Weight: 0.270 lb
Blade Projection: 4-3/8 in, 111 mm

Female Hex Size (in): 1/4 in

Magnetism: Magnetic

Overall Length: 8.5 in, 216.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Co. Torx is a registered trademark of Acument Intellectual Properties, LLC.

$18.85

1/4 Sq. Drive Socket X 3/16 6 Pt Hex

AX M1P06

SCKT 1/4 SQ DR 3/16 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.030 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 5/16 in

Hex Opening: 3/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$24.28

1/4 Sq. Drive Socket X 5/16 6 Pt Hex

AX M1P10

SCKT 1/4 SQ DR 5/16 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.033 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$14.54

1/4 Sq. Drive Socket X 3/8 6 Pt Hex

AX M1P12

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.068 lb
Diameter Drive End (C): 5/8 in
Diameter Nose End (B): 5/8 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$19.28

3/8in Drive Socket

AX M-3110

SCKT 3/8 SQ DR 5/16 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.090 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/4 in
Set: No

$23.45

1/4 Hex Slotted Drive Bit X 6-F-8R

AX M-320X

BIT 1/4 PWRDRW/SL 6F-8R SLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.087 lb
Body Diameter: .241 in, 6.12 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 6F-8R
Set: No

$17.15

MAG. BIT-HOLDER 1/4 MALE HEX D

AX M-490-10

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 10" OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.237 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 10.0 in, 254.0 mm
Set: No

$47.35

3/8in Square Drive, 1/4 Hex, 1-1/4 OAL Mag, Socket

AX M-3108

SCKT 3/8 SQ DR 1/4 HEX 1-1/4 OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.089 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 7/16 in

Hex Opening: 1/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/4 in
Set: No

$24.06

3/8in Drive Socket

AX M-3116

SCKT 3/8 SQ DR 1/2 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.154 lb
Diameter Drive End (C): 13/16 in
Diameter Nose End (B): 13/16 in

Hex Opening: 1/2 in
Magnetism: Magnetic

Opening Depth (D) (in): 11/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$24.21

3/8in Drive Socket

AX M-3118

SCKT 3/8 SQ DR 9/16 HEX 1-1/2" OAL MAG
3/8" Drive - SAE - Magnetic, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.180 lb
Diameter Drive End (C): 7/8 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$25.84

1/4 Hex Drive Bit Holder X 3-3/32

AX M-497

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 3 1/16
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.068 lb
Description: Magnetic, 3/8" (9.5mm) reduced dia.

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 3.09 in, 79.0 mm
Set: No

$26.95

1/4 Sq. Drive Socket X 7/32 6 Pt Hex

AX M1P07

SCKT 1/4 SQ DR 7/32 HEX 7/8 OAL MAG
1/4" Drive - SAE - 6 Point & 6 Point Magnetic, for Predrilled Holes Self-Drilling and Tapping Screws

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Sockets for predrilled holes are intermediate hardness. Sockets for self-drilling and tapping screws are maximum hardness.

Weight: 0.031 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 7/32 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$23.31

1/4 Hex Drive Bit Holder X 3-1/16

AX M-498

MAG BIT HLDR 1/4 HEX DR 5/16 HEX 3-3/16
1/4" Hex Drive for 5/16" Hex Inserts - Bit Holders

Weight: 0.142 lb
Description: Magnetic

Magnetism: Magnetic

Overall Length: 3.06 in, 78.0 mm
Set: No

$53.47

MAG. BIT-HOLDER 1/4 MALE HEX D

AX M-490-12

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 12" OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.271 lb
Description: Magnetic

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Magnetic

Overall Length: 12.0 in, 304.0 mm
Set: No

$65.03

1/4 Sq Drive Socket X 5.5mm 6 Pt Hex (M)

AX M-5.5MM11

SCKT 1/4 SQ DR 5.5MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.030 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 9.5 mm

Hex Opening: 5.5 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$23.54

1/2 Sq. Drive Socket X 7/8 6 Pt Hex

AX M-5124

SCKT 1/2 SQ DR 3/4 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.292 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 3/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 15/32 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$85.68

1/2 Sq. Drive Socket X 9/16 6 Pt Hex (M

AX M-5118

SCKT 1/2 SQ DR 9/16 HEX 1-1/2" OAL MAG
1/2" Drive - SAE - Magnetic, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.191 lb
Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Single Square

Overall Length A: 1-1/2 in
Set: No

$35.70

1/4 Sq. Drive Socket X 5mm 6 Pt Hex (M)

AX M-5MM11

SCKT 1/4 SQ DR 5MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.030 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 8.7 mm

Hex Opening: 5 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$21.17

1/4 Sq. Drive Socket X 6mm 6 Pt Hex (M)

AX M-6MM11

SCKT 1/4 SQ DR 6MM HEX 22.1MM OAL MAG
1/4" Drive - Metric - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.027 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 9.5 mm

Hex Opening: 6 mm
Magnetism: Magnetic

Opening Depth (D) (in): 3.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$22.62

1/4in Hex Nutsetter

AX M6N-0808-3

NUTSET 1/4 M HEX PWR DR 1/4 HEX 3OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.066 lb

Magnetism: Magnetic

Overall Length: 3.0 in
Set: No
Size: 1/4 in

$32.47

Nut Setter, 1/4in

AX M6N-0810-5

NUTSET 1/4 M HEXPWRDR 5/16 HEX 5 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.119 lb

Magnetism: Magnetic

Overall Length: 5.0 in
Set: No
Size: 5/16 in

$37.74

1/4 Hex Power Drive Nutsetter X 10mm

AX M6N-08-10M-3

NUTSET 1/4MHXPWR DR 10MMHEX 76MM OAL MAG
1/4" Drive 6 Point Metric Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.084 lb

Magnetism: Magnetic

Overall Length: 76.0 mm
Set: No
Size: 10 mm

$40.97

1/4in Hex Nutsetter

AX M6N-0814-3

NUTSET 1/4 M HEXPWRDR 7/16 HEX 3 OAL MAG
1/4" Drive 6 Point SAE Hex Drive Nutsetters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.100 lb

Magnetism: Magnetic

Overall Length: 3.0 in
Set: No
Size: 7/16 in

$39.61

Rod

GD 928843

Rod

$24.80

Blade Regulate

GD 930621

Blade Regulate

$313.00

Air Connection

GD 932347

Air Connection

$76.00

Spring - Conical

CL 207099

Spring - Conical

$5.50

Plug Inlet

CL 207036

Plug Inlet

$46.00

1/4 Hex Dr X T-40 Torx Hex X 3-1/2 Torx Hex Drive

AX 49-B-TX-40

BIT 1/4 HEX PWRDR T40 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.062 lb

Drive: Hex Power Drive
Drive Size: T-40
Fastener Type: Torx

Measurement Across Lobes: .260 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

Adapter. Hex to 1/2" Sq. Drive

AX A-516

ADAPT 1/2 MALE HEX DR 1/2 SQ 1-5/32" OAL
Socket & Ratchet Wrench Adapters, SAE

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.072 lb

Male Hex Size: 1/2 in
Male Square Drive (in): 1/2 in

Overall Length: 1.09 in
Set: No

$27.88

Floating Adapter, Guided Size 2, 3/4

AX S308450

Floating Adapter, Guided Size 2, 3/4

$1,345.13

M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END

AX-CUSTOM SOCKET

M12X1.0 THREADED DRIVE, 3/8" FEMALE HEX SOCKET, 1.26"OVERALL LENGTH WRENCH FLATS ON NOSE END

Call for pricing

Bearing

GD 11700

Bearing

$15.50

Seal, Oil

GD 18307

Seal, Oil

$39.00

O-Ring

GD 912150

O-Ring

$0.80

O-ring

GD 914350

O-ring

$7.30

O-Ring

GD 922374

O-Ring

$0.90

Needle Roller

GD 926053

Needle Roller

$2.60

Gasket

GD 9D7916

Gasket

$5.20

Piston

GD A2V2

Piston

$209.00

3/4 Sq. Drive Socket X 1-1/2 6 Pt Hex

AX 7348

3/4" Drive - SAE - 6 Point & Double Hex, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 2-1/8 in
Diameter Nose End (B): 2-1/4 in

Hex Opening: 1-1/2 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1 in
Opening Modifier: 6 Point Hex

Overall Length A: 4 in

$117.98

3in Ext Grinder, 28K, 1/4in Collet

DC 10L1100-36

3" EXT.GRINDER,28K,1/4" COLLET

25,000 - 28,000 RPM 0.3 hp (0.22 kW)

3" | 75mm & 5" | 125mm extended housing for hard to reach areas

Balanced and comfortable to minimize fatigue

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm

$799.80

Extension Grinder

DC 10L1181-36

5" EXT. GRINDER,28K,1/4" COLLET

25,000 - 28,000 RPM 0.3 hp (0.22 kW)

3" | 75mm & 5" | 125mm extended housing for hard to reach areas

Balanced and comfortable to minimize fatigue

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm

$847.10

Grinder, RE, 23K, 1/4in Collet

DC 10L2580-01

GRINDER,RE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Durable aluminum housing - Ideal for die/mold and deburring work

Front and rear exhaust models available

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.32 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$683.70

Grinder, RE, 23K, 1/4in Collet

DC 10L2580-36

GRINDER,RE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Durable aluminum housing - Ideal for die/mold and deburring work

Front and rear exhaust models available

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.54 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$860.00

5 In R/A 9,000 rpm Sander

DC 10L2751-80

RA SNDR/GRD,FE,9K,5/8-11E

850 - 11,000 RPM 0.9 hp (0.67 kW)

Aluminum 10L and Composite 12L housing options

High output motor for demanding sanding applications

Heavy duty low profile head for superior durability

Tool not supplied with backing pad as shown

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Aluminum
Weight (lbs): 3.09 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches

$1,453.40

RA Sander/Grinder

DC 10LF201-36

RA SNDR/GRD,20K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH Option Supplied with 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Aluminum
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$735.30

Grinder, RE, 3000 Rpm, 3/8 collet

DC 10N1080-0124

Grinder, RE, 3000 Rpm, 3/8 collet

$670.80

RA Sander/Grinder, 12K, 6MM Collet

DC 10N1200-36M6

RA Sander/Grinder, 12K, 6MM Collet

$834.20

Grinder

DC 10N2080-0124

Grinder

$842.80

Grinder

DC 10N2580-01

Grinder

$980.40

Turbine Grinder, FE, 100K, 3mm Collet

DC 10R9000-03

TURBINE GRD,FE,100K,3MM COLLET

100,000 RPM 0.06 hp (0.044 kW)

Requires no air line lubrication - High precision ball bearings for long life expectancy

Two-stage turbine motor with roll throttle

Achieves a superb finish with its high speed and precision spindle

Light weight and durable steel housing

Low vibration and quiet operation minimizes operator fatigue

Air Inlet Size: 1/8 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 0.441 lb

CAUTION: Use dry air at 90 psi maximum: Do not lubricate turbine grinders. Lubrication will be detrimental to the operation and life of turbine tools. Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, 7 ft./2.1 m air supply hose, replaceable cartridge hose filter.

$649.30

Gear Nose & Internal

DC 1110040

Gear Nose & Internal

$302.00

Thread Cover

DC 1110050

Thread Cover

$15.50

Valve Housing

DC 1110052

Valve Housing

$98.00

Hose Adaptor

DC 1110053

Hose Adaptor

$88.00

Rear Plate Bearing

DC 1110068

Rear Plate Bearing

$126.00

Muffler

DC 1110134

Muffler

$1.60

Retaining Nut

DC 1110185

Retaining Nut

$48.00

Muffler

DC 1110892

Muffler

$20.60

Mounted Router

DC 11T4309-62

MOUNTED ROUTER,SE,9K,3/8" COL

18,000 RPM 1.7 hp (1.27 kW)

Cool running pneumatic motor stays cool even under heavy load

Flat top provides firm setting for changing cutters and making adjustments

Smooth accurate cuts - assured by precision spindle

3/8" Collet Supplied

Air Inlet Size: 1/2 in
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 5.5 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench

$1,771.60

Bearing Plate S/A

DC 1203

Bearing Plate S/A

$76.00

Bearing Plate S/A

DC 1204

Bearing Plate S/A

$95.00

Router

DC 12L1000-36RT

ROUTER,ERGO,FE,30K,1/4" COLLET

30,000 - 34,000 RPM 0.3 hp (0.22 kW)

Tremendous power for the toughest portable routing operations

Unique governor design assures minimum air consumption, maximum power all at correct speed and long motor life

All models oil free

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/4in / 6.4mm Standard Equipment: Collet, applicable wrenches

$722.40

Grinder

DC 12L1001-36

GRINDER,FE,34K,ERGO,1/4" COLLET

12,000 - 34,000 RPM 0.3 hp (0.22 kW)

Durable and ergonomic composite housing - Ideal for die/mold and deburring

Compact size for ultimate control - easy access to confined areas

OH versions include 4' of Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.88 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm

$359.48

Oscillating Inline Saw w/ 2.5in Capacity

DC 12L2065-90

ST OSC SAW,RE,14K,3/8 DIA HOLE

14,000 RPM 0.6 hp (0.45 kW)

Easy to change blades

Excellent control and high productivity with minimum fatigue

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 2.2 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable wrenches, oilless blades

$718.10

Rt. Angle OSC Saw, 14k

DC 12L2240-90

RA OSC SAW,RE,14K,3/8" DIA HOLE

14,000 RPM 0.6 hp (0.45 kW)

Easy to change blades

Excellent control and high productivity with minimum fatigue

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 2.2 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable wrenches, oilless blades

$1,238.40

Grinder Ergo FE, 23K, 1/4in Collet

DC 12L2500-36

GRINDR ERGO,FE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$623.50

Inline Grinder 12000 rpm 1/4 Collet

DC 12L2542-01

GRINDR ERGO,RE,12K,GOV,1/4" COL

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$842.80

Grinder, 23000 Rpm

DC 12L2580-01

GRINDR ERGO,RE,23K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Ergonomic composite housing

Optional over-hose available

High power-to-weight ratio for optimal productivity

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.76 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$522.88

ROUTER ERGO

DC 12L2580-0124RT

ROUTER ERGO,RE,23K,3/8" COLLET

18,000 - 23,000 RPM 0.9 hp (0.67 kW)

Composite comfortable grip

Roll value for easy operation

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 2.65 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Collet, applicable wrenches

$933.10

Rt. Angle Sander/Grinder, RE, 20K, 1/4in Collet

DC 12L2718-36

RA SND/GRD,ERGO,RE,18K,1/4" COL

14,500 RPM 0.9 hp (0.67 kW)

Composite housing

Powerful motor wiith rear exhaust

Robust design perfectly suited for industrial applications

Standard 3" extension

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.98 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2 in / 12.7 mm Standard Equipment: Wheel guard and flange wrench

$958.90

7" Right Angle Sander/Polisher, HD Head

DC 12L2750-80

RA SNDR/GRD,ERGO,FE,6K,5/8-11E

850 - 11,000 RPM 0.9 hp (0.67 kW)

Aluminum 10L and Composite 12L housing options

High output motor for demanding sanding applications

Heavy duty low profile head for superior durability

Tool not supplied with backing pad as shown

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Composite
Weight (lbs): 3.31 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16 in / 7.9 mm Standard Equipment: Applicable collet, collet wrenches

$958.90

Rt. Angle Sander/Grinder, RE, 12K, 1/4in Collet

DC 12L2777-36

Rt. Angle Sander/Grinder, RE, 12K, 1/4in Collet

$1,285.70

Router

DC 12L4018-01

ROUTER,ERGO,FE,GOV,18K,1/4" COL

18,000 RPM 1.7 hp (1.27 kW)

Maximum power for larger routing application

Tremendous power for the toughest portable routing operations

Unique governor design assures minimum air consumption, maximum power at correct speed and long motor life

All models oil free

Air Inlet Size: 1/2 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 4.19 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench

$1,290.00

Ra Sndr, Ergo, Se, Gr, 7.2K, 5/8-11

DC 12L4207-80

RA SNDR,ERGO,SE,GR,7.2K,5/8-11

3,400 RPM 1.7 hp (1.27 kW)

High output motor for the most demanding applications

Comfortable and ergonomic composite handle

Includes auxiliary handle for optimum operator control

Tool not supplied with backing pad as shown

Air Inlet Size: 1/2 in
Exhaust: Side
Type Housing: Composite
Weight (lbs): 6.4 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2 in / 12.7 mm Standard Equipment: Nut, washer, spacer and wrenches

$2,141.40

Pencil Grinder

DC 12R0400-18

GRD,PEN,ERGO,SHRT GRD,60K,1/8"

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$505.68

Pencil Grinder

DC 12R0410-16

GRD,PENCIL,ERGO,60K,3/32" COL

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$632.10

Pencil Grinder

DC 12R0410-18

GRD,PENCIL,ERGO,60K,1/8" COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$514.28

Circular Air Inline Saw w/ 12,000 rpm-Re

DC 12S1282-02

SAW,RA,ERGO,RE,12K,2"

2,400 - 20,000 RPM 0.3 hp (0.22 kW) 0.4hp (.3kW) 12LF

Vacuum ready

Compact and easy to use

Easy to change blades

Adjustable depth control

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/4in / 6.4mm Standard Equipment: Applicable wrenches, oilless blades

$1,019.10

Saw, RA, Ergo, RE, 20K, 2in

DC 12S1283-02

SAW,RA,ERGO,RE,20K,2"

2,400 - 20,000 RPM 0.3 hp (0.22 kW) 0.4hp (.3kW) 12LF

Vacuum ready

Compact and easy to use

Easy to change blades

Adjustable depth control

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/4in / 6.4mm Standard Equipment: Applicable wrenches, oilless blades

$1,019.10

Air Saw

DC 12S2748-01

RA SAW,4" ,FE,GR,9K

430 - 11,000 RPM 0.9 hp (0.67 kW)

Compact and easy to use

Excellent control and high productivity with minimum fatigue

Easy to change blades

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Composite
Weight (lbs): 4.9 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 5/16in / 7.9mm Standard Equipment: Applicable wrenches, oilless blades, 3/4in Arbor adapter

$1,810.30

Saw, 12-42 Series

DC 12S4218-01

RA SAW,ERGO,4" ,SE,GR,8.6K

5,800 - 8,600 RPM 1.7 hp (1.27 kW)

Adjustable depth control

Easy to change blades

Compact and easy to use

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Composite
Weight (lbs): 7.9 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2in / 12.7mm Standard Equipment: Wheel guard and flange wrench

$2,696.10

Wear Ring

DC 1356

Wear Ring

$6.50

Chuck Body

DC 1400

Chuck Body

$154.00

Router Bearing

DC 14-0533

Router Bearing

$46.00