Airpower | CLECO S10555 branded products

GD 30057

Seal

$89.00

GD 500504

Needle Bearing

$9.70

GD 535409

Washer

Call for pricing

GD 535835

Muffler

$13.40

GD 536284

Seat

$14.50

GD 539616

Spring Retaining Socket Pin

$36.00

GD 539617

$36.00

GD 540014

Rotor Blade

$7.50

GD 540406

Rotor Blade

$13.40

GD 540745

Bearing

$63.00

GD 542924

$142.00

GD 60888

O-Ring

$0.90

GD 902362

O-ring

$1.00

GD 912974

Bearing

$79.00

GD 916899

O-Ring

$0.80

GD 918419

Spring

$9.20

GD 918422

Spring

$31.00

GD 923144

O-Ring

$1.00

GD 926356

Hydraulic Plate

$346.00

GD 926362

Spring, Blade

$2.20

GD 928830

Rotor

$2,305.00

GD 928842

Bolt Shut-Off

$342.00

GD 928865

Valve Plate

$195.00

GD 9D5170

Cover Plate

$82.00

GD 9D6036

Pawl

$165.00

GD A27415

Push Rod Assy

$238.00

GD B123X

Screw

$0.80

GD B134D

Screw

$5.60

GD C108C

Nut

$1.10

AX 10005S

RING, RETAINING
Plastic Ring With Steel Insert

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.010 lb

Drive: 3/4" Square

Set: No

$19.32

AX 10034S

Pin Retainer

$19.16

AX 1107

SCKT 1/4 SQ DR 7/32 HEX 7/8 OAL
1/4" Drive - SAE - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.001 kg
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 7/32 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$13.80

SCKT 1/2 SQ DR 11MM HEX 57.2MM OAL, 12/Minimum

AX 11MM25

SCKT 1/2 SQ DR 11MM HEX 57.2MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.271 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 17.5 mm

Hex Opening: 11 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7.2 mm
Opening Modifier: 6 Point Hex

Overall Length A: 57.1 mm
Set: No

$21.89

Socket 3/8 Sq. Dr. 14MM Hex 88.9 OAL

AX 14MM33

SCKT 3/8 SQ DR 14MM HEX 88.9MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.357 lb
Diameter Drive End (C): 22.1 mm
Diameter Nose End (B): 22.1 mm

Hex Opening: 14 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: 6 Point Hex

Overall Length A: 88.9 mm
Set: No

$46.92

1/2 Sq Drive Socket X 16mm Double Hex

AX 16MM15-D

SCKT 1/2 SQ DR 16MM DBL-HEX 38.1MM OAL
1/2" Drive - Metric - 6 Point & Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.194 lb
Diameter Drive End (C): 25.4 mm
Diameter Nose End (B): 25.4 mm

Hex Opening: 16 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Double Hex

Overall Length A: 38.1 mm
Set: No

$26.10

1/4 Socket Head Insert Bit X 9/64 Hex

AX 185-10X

BIT 1/4 HEX INS 9/64" HEX 1" 25MM OAL
1/4" Hex Insert Bits - Socket Head Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb
Cap Screw Size: 8

Drive: Hex Insert
Fastener Type: Socket Head

Hex Size: 9/64 in

Overall Length: 1.0 in, 25.0 mm
Set: No

$3.93

1/4 Socket Head Insert Bit X 7/64 Hex

AX 185-9X

BIT 1/4 HEX INS 7/64" HEX 1" 25MM OAL
1/4" Hex Insert Bits - Socket Head Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.010 lb
Cap Screw Size: 6

Drive: Hex Insert
Fastener Type: Socket Head

Hex Size: 7/64 in

Overall Length: 1.0 in, 25.0 mm
Set: No

$5.13

SCKT 3/8 SQ DR 19MM HEX 38.1MM OAL, 12/Minimum

AX 19MM13

SCKT 3/8 SQ DR 19MM HEX 38.1MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.252 lb
Diameter Drive End (C): 28.6 mm
Diameter Nose End (B): 28.6 mm

Hex Opening: 19 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.9 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$30.18

AX 204033

Spring

$11.39

SCKT 3/8 SQ DR 21MM HEX 38.1MM OAL, 12/Minimum

AX 21MM13

SCKT 3/8 SQ DR 21MM HEX 38.1MM OAL
3/8" Drive - Metric - 6 Point & 12 Point, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.324 lb
Diameter Drive End (C): 31.7 mm
Diameter Nose End (B): 31.7 mm

Hex Opening: 21 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13.5 mm
Opening Modifier: 6 Point Hex

Overall Length A: 38.1 mm
Set: No

$32.56

SCKT 3/8 SQ DR 21MM HEX 50.8MM OAL, 12/Minimum

AX 21MM23

SCKT 3/8 SQ DR 21MM HEX 50.8MM OAL
3/8" Drive - Metric - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.427 lb
Diameter Drive End (C): 31.7 mm
Diameter Nose End (B): 31.7 mm

Hex Opening: 21 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13.5 mm
Opening Modifier: 6 Point Hex

Overall Length A: 50.8 mm
Set: No

$37.49

BIT KIT, 24 PIECE ASSORTMENT WITH CASE

AX 24BITKIT

BIT KIT, 24 PIECE ASSORTMENT WITH CASE

$115.09

SCKT 3/8" SQ DR 5/16" HEX 2" OAL, 12/Minimum

AX 3210

SCKT 3/8" SQ DR 5/16" HEX 2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.076 kg
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in

Opening Depth (D) (in): 3/16 in

Overall Length A: 2 in
Set: No

$15.39

Socket, 3/8 SQ DR, 5/16 HEX, 3-1/2in OAL, 12/Minimum

AX 3310

Socket, 3/8 SQ DR, 5/16 HEX, 3-1/2in OAL, 12/Minimum

$28.99

Socket, 3/8 SQ DR, 5/16 DBL-HEX, 3-1/2in OAL, 12/Minimum

AX 3310-D

SCKT 3/8 SQ DR 5/16 DBL-HEX 3-1/2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Long and Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.325 lb
Diameter Drive End (C): 3/4 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in

Opening Depth (D) (in): 3/16 in

Overall Length A: 3-1/2 in
Set: No

$44.88

3/8 Fem. Sq. Drive Socket X 1-1/16 Deep Well, 12/Minimum

AX 3534

SCKT 3/8 SQ DR 1-1/16 HEX 2" OAL
3/8" Drive - SAE - 6 Point & Double Hex, Thin Wall, Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.237 lb
Diameter Drive End (C): 1-1/2 in
Diameter Nose End (B): 1-1/2 in

Hex Opening: 1-1/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$54.57

Bit 1/4 Hex Ins, 20IP TXPLS, 1in 25mm QAL

AX 440-20IPRX

BIT 1/4 HEX INS 20IPR TXPLS 1" 25MM OAL
1/4" Hex Insert Bits - Tamper Resistant - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.015 lb

Drive: Hex Insert
Drive Size: 20IPR
Fastener Type: Torx Plus

Measurement Across Lobes: .151 in

Overall Length: 1.0 in, 25.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

$13.84

BIT 1/4 HEX INS #2 PH 1in 25MM OAL

AX 440-2I

BIT 1/4 HEX INS #2 PH 1" 25MM OAL
1/4" Hex Insert Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.012 lb

Drive: Hex Insert
Fastener Type: Phillips

Overall Length: 1.0 in, 25.0 mm
Point Size: 2
Set: No
SKU Group Note: ACR is a trademark of the Phillips Screw Co.

$1.45

Bit 5/16 Hex Insert 40IP TXPLS 1-1/4in, 32mm

AX 480-40IPX

BIT 5/16 HEX INS 40IP TXPLS 1-1/4" 32MM
5/16" Hex Insert Bits - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.025 lb

Drive: Hex Insert
Drive Size: 40IP
Fastener Type: Torx Plus

Measurement Across Lobes: .260 in

Overall Length: 1.25 in, 32.0 mm
Set: No
SKU Group Note: Torx, Torx Plus and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

$7.86

BIT-HOLDER 1/4 MALE HEX DRV PO

AX 490-10

BIT HLDR 1/4 HEX DR 1/4 HEX 10 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.211 lb

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Non-Magnetic

Overall Length: 10.0 in, 254.0 mm
Set: No

$41.06

BIT-HOLDER 1/4 MALE HEX DRV PO

AX 490-6

BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts - Bit Holders

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

1/4" Hex Drive for 1/4" Hex Inserts
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.123 lb

Drive: Hex Drive
Drive Size: 1/4 in

Magnetism: Non-Magnetic

Overall Length: 6.0 in, 152.0 mm
Set: No

$28.05

BIT 1/4PWR DR 15IPR TXPLS 1-15/16" 49MM

AX 49-15IPRX

BIT 1/4PWR DR 15IPR TXPLS 1-15/16" 49MM
1/4" Hex Power Drive - Tamper Resistant - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Tamper resistant Torx Plus bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.044 lb

Drive: Hex Power Drive
Drive Size: 15IPR
Fastener Type: Torx Plus

Measurement Across Lobes: .128 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$22.59

BIT 1/4 HEX DRV POWER # 1.0 S

AX 491-B-SFX

BIT 1/4 HEXPWRDR #1 SEL-O-FIT 3-1/2" 89MM
1/4" Hex Power Drive - Sel-O-Fit Bits

Weight: 0.028 lb

Drive: Hex Power Drive
Fastener Type: Sel-O-Fit

Overall Length: 3.5 in, 89.0 mm
Point Size: 1
Set: No
SKU Group Note: Sel-O-Fit bits are designed to provide a more efficient means of driving Pozidriv screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit is a registered trademark of Cooper Industries.

$9.22

1/4 Sel-O-Fit Hex Drive X #1 X 1-15/16

AX 491-SFX

BIT 1/4 HEX PWRDR #1 SELOFT 1-15/16" 49MM
1/4" Hex Power Drive - Sel-O-Fit Bits

Weight: 0.018 lb

Drive: Hex Power Drive
Fastener Type: Sel-O-Fit

Overall Length: 1.93 in, 49.0 mm
Point Size: 1
Set: No
SKU Group Note: Sel-O-Fit bits are designed to provide a more efficient means of driving Pozidriv screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit is a registered trademark of Cooper Industries.

$6.82

Bit 1/4 Hex x 25IP Torx

AX 49-25IPX

BIT 1/4 HEXPWRDR 25IP TXPLS 1-15/16" 49MM
1/4" Hex Power Drive - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.020 lb

Drive: Hex Power Drive
Drive Size: 25IP
Fastener Type: Torx Plus

Measurement Across Lobes: .173 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$10.16

1/4 Hex Drive X#2 Phillips X 2-3/4 ACR

AX 492-A-ACR2X

BIT 1/4 HEX PWR DR #2 PH ACR 2-3/4" 70MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.033 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 2.75 in, 70.0 mm
Point Size: 2
Set: No

$3.53

1/4 Hex Drive X#2 PhillipsX 1-15/16 ACR

AX 492-ACR2-DX

BIT 1/4HEXPWRDR #2 PH ACR 1-15/16" 49MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.023 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No

$2.84

1/4 Hex Drive X#2 PhillipsX 1-15/16 ACR

AX 492-ACR2-RX

BIT 1/4 HEX PWRDR #2 PH ACR 1-15/16" 49MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.022 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No

$2.84

1/4 Hex Drive X #2 Phillips X 3-1/2 ACR

AX 492-B-ACR2X

BIT 1/4 HEX PWR DR #2 PH ACR 3-1/2" 89MM
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.043 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 3.5 in, 89.0 mm
Point Size: 2
Set: No

$4.18

1/4 Hex Power DriveX Frearson X 3-1/2

AX 492-BFX

BIT 1/4 HEX PWR DR #1 FREAR 3-1/2 inch 89MM
1/4 inch Hex Power Drive - Frearson Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter - the larger the screw, the larger the body diameter.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter - the larger the screw, the larger the body diameter.

Weight: 0.044 lb

Drive: Hex Power Drive
Fastener Type: Frearson

Overall Length: 3.5 in, 89.0 mm
Screw Size: All
Set: No

$6.82

Bit, 1/4 Hex PWR DR, #2 PH, 3-1/2in, 89mm OAL

AX 492-BI

BIT 1/4 HEX PWR DR #2 PH 3-1/2" 89MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.043 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 3.5 in, 89.0 mm
Point Size: 2
Set: No

$2.98

1/4 Hex Drive X #2 Phillips X 6 w/ACR

AX 492-C-ACR2-DX

BIT 1/4 HEX PWRDR #2 PH ACR 6" 152MM OAL
1/4" Hex Power Drive - ACR - Phillips Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
ACR (Anti-Camout Rib) Design Reduces Slippage for Increased Torque

Weight: 0.080 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 6.0 in, 152.0 mm
Point Size: 2
Set: No

$7.15

Bit, 1/4 Hex Pwr Dr. #2 SELOFT, 1-15/16in, 49mm

AX 492-SFX

BIT 1/4HEXPWRDR #2 SELOFT 1-15/16" 49MM
1/4" Hex Power Drive - Sel-O-Fit Bits

Weight: 0.022 lb

Drive: Hex Power Drive
Fastener Type: Sel-O-Fit

Overall Length: 1.93 in, 49.0 mm
Point Size: 2
Set: No
SKU Group Note: Sel-O-Fit bits are designed to provide a more efficient means of driving Pozidriv screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit is a registered trademark of Cooper Industries.

$6.50

APEX #3 X 6in LONG PHILLIPS BI

AX 4930-CX

BIT 1/4 HEX PWR DR #3 PH 6" 152MM OAL
1/4" Hex Power Drive

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks

Weight: 0.082 lb

Drive: Hex Power Drive
Fastener Type: Phillips

Overall Length: 6.0 in, 152.0 mm
Point Size: 3
Set: No

$5.70

1/4in Hex Power Bit

AX 493-BI

1/4in Hex Power Bit

$3.02

1/4 Torx Plus #40 Hex Power Drive Bit

AX 49-40IPX

BIT 1/4 HEX 40IP TXPLS 1-15/16" 49MM OAL
1/4" Hex Power Drive - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.031 lb

Drive: Hex Power Drive
Drive Size: 40IP
Fastener Type: Torx Plus

Measurement Across Lobes: .260 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$10.16

1/4 Hex Drive X T-06 Torx Hex X 2-3/4

AX 49-A-TX-06

BIT 1/4 HEX PWR DR T6 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.017 lb

Drive: Hex Power Drive
Drive Size: T-6
Fastener Type: Torx

Measurement Across Lobes: .065 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.06

1/4 Hex Drive X T-20 Torx Hex X 2-3/4

AX 49-A-TX-20

BIT 1/4 HEX PWRDR T20 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.023 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

1/4 Hex Drive X T-25 Torx Hex X 2-3/4

AX 49-A-TX-25

BIT 1/4 HEX PWRDR T25 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

1/4 Hex Drive X T-30 Torx Hex X 2-3/4

AX 49-A-TX-30

BIT 1/4 HEX PWRDR T30 TX 2-3/4" 70MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.034 lb

Drive: Hex Power Drive
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 2.75 in, 70.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.74

1/4 Hex Drive x 3-1/2 Long

AX 49-B-30IPX

BIT 1/4 HEX 30IP TXPLS 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Plus Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

Weight: 0.043 lb

Drive: Hex Power Drive
Drive Size: 30IP
Fastener Type: Torx Plus

Measurement Across Lobes: .216 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

$12.85

1/4 Hex Drive X T-08 Torx Hex X 3-1/2

AX 49-B-TX-08

BIT 1/4 HEX PWR DR T8 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.019 lb

Drive: Hex Power Drive
Drive Size: T-8
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$14.44

1/4 Hex Drive X T-10 Torx Hex X 3-1/2

AX 49-B-TX-10

BIT 1/4 HEX PWRDR T10 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$10.03

1/4 Hex Drive X T-15 Torx Hex X 3-1/2

AX 49-B-TX-15

BIT 1/4 HEX PWRDR T15 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.024 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

1/4 Hex Drive X T-20 Torx Hex X 3-1/2

AX 49-B-TX-20

BIT 1/4 HEX PWRDR T20 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.028 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$10.03

BIT 1/4 HEX PWRDR T25 TX 3-1/2" 89MM OAL

AX 49-B-TX-25

BIT 1/4 HEX PWRDR T25 TX 3-1/2" 89MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.032 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Long Description: 1/4", Hex Power Drive

Measurement Across Lobes: .173 in

Overall Length: 3.5 in, 89.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$9.76

1/4 Hex Drive X T-10 Torx Hex X 6

AX 49-C-TX-10

BIT 1/4 HEX PWR DR T10 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.036 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

1/4 Hex Drive X T-15 Torx Hex X 6

AX 49-C-TX-15

BIT 1/4 HEX PWR DR T15 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.034 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.03

1/4 Hex Drive X T-20 Torx Hex X 6

AX 49-C-TX-20

BIT 1/4 HEX PWR DR T20 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.044 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

BIT 1/4 HEX DRV POWER # 7. TO

AX 49-TX-07

BIT 1/4 HEX PWR DR T7 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-7
Fastener Type: Torx

Measurement Across Lobes: .077 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

BIT 1/4 HEX DRV POWER # 25. T

AX 49-C-TX-25

BIT 1/4 HEX PWR DR T25 TORX 6" 152MM OAL
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.051 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 6.0 in, 152.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$12.42

1/4 Hex Drive X T-08 Torx Hex X 1-15/16

AX 49-TX-08

BIT 1/4 HEX PWR DR T8 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-8
Fastener Type: Torx

Measurement Across Lobes: .090 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

BIT 1/4 HEX DRV POWER # 9. TO

AX 49-TX-09

BIT 1/4 HEX PWR DR T9 TORX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.014 lb

Drive: Hex Power Drive
Drive Size: T-9
Fastener Type: Torx

Measurement Across Lobes: .097 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$11.22

BIT 1/4 HEX DRV POWER # 10. T

AX 49-TX-10

BIT 1/4 HEX PWR DR T-10 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-10
Fastener Type: Torx

Measurement Across Lobes: .107 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-15 Torx Hex X 1-15/16

AX 49-TX-15

BIT 1/4 HEX PWR DR T-15 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.016 lb

Drive: Hex Power Drive
Drive Size: T-15
Fastener Type: Torx

Measurement Across Lobes: .128 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-20 Torx Hex X 1-15/16

AX 49-TX-20

BIT 1/4 HEX PWR DR T-20 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.018 lb

Drive: Hex Power Drive
Drive Size: T-20
Fastener Type: Torx

Measurement Across Lobes: .151 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

#25 Torx, Hex Drive

AX 49-TX-25-W

BIT 1/4 HEX PWR DR T-25 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torxalign - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.020 lb

Drive: Hex Power Drive
Drive Size: T-25
Fastener Type: Torx

Measurement Across Lobes: .173 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$13.06

1/4 Hex Drive X T-27 Torx Hex X 1-15/16

AX 49-TX-27

BIT 1/4 HEX PWR DR T-27 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.022 lb

Drive: Hex Power Drive
Drive Size: T-27
Fastener Type: Torx

Measurement Across Lobes: .195 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Drive X T-30 Torx Hex X 1-15/16

AX 49-TX-30

1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Drive: Hex Power Drive
Drive Size: T-30
Fastener Type: Torx

Measurement Across Lobes: .216 in

Overall Length: 1.93 in, 49.0 mm
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$7.04

1/4 Hex Power Drive T-45 TX 1-15/16, 49MM

AX 49-TX-45

BIT 1/4 HEX PWR DR T-45 TX 1-15/16" 49MM
1/4" Hex Power Drive - Torx Bits

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Power Bits Are Best Used With Quick-Release (QR series) Chucks
Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

Weight: 0.035 lb

Drive: Hex Power Drive
Drive Size: T-45
Fastener Type: Torx

Measurement Across Lobes: .304 in

Overall Length: 1.93 in, 49.0 mm
Set: No
SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC.

$36.89

1/4 Sq. Drive Socket X 4mm 6 Pt Hex

AX 4MM11

SCKT 1/4 SQ DR 4MM HEX 22.2MM OAL
1/4" Drive - Metric - Standard Length, 6 Point and Double Hex

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.026 lb
Diameter Drive End (C): 12.7 mm
Diameter Nose End (B): 6.4 mm

Hex Opening: 4 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 2.4 mm
Opening Modifier: 6 Point Hex

Overall Length A: 22.2 mm
Set: No

$15.54

1/2 Sq. Drive Socket X 11/16 6 Pt Hex

AX 5122

SCKT 1/2" SQ DR 11/16" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.255 lb
Diameter Drive End (C): 1-1/8 in
Diameter Nose End (B): 1-1/8 in

Hex Opening: 11/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$31.96

BIT 10-32M TH PWR DR #1 POZI 1-1/2" 38MM, 25/Min

AX 501-PZDX

BIT 10-32M TH PWR DR #1 POZI 1-1/2" 38MM, 25/Min

$11.78

1/2 Sq. Drive Socket X 15/16 6 Pt Hex

AX 5130

SCKT 1/2" SQ DR 15/16" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.280 lb
Diameter Drive End (C): 1-3/8 in
Diameter Nose End (B): 1-3/8 in

Hex Opening: 15/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 5/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$45.73

1/2 Sq. Drive Socket X 7/8 6 Pt Hex

AX 5128

SCKT 1/2" SQ DR 7/8" HEX 1-1/2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.341 lb
Diameter Drive End (C): 1-5/16 in
Diameter Nose End (B): 1-5/16 in

Hex Opening: 7/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 9/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-1/2 in
Set: No

$40.80

1/2 Sq. Drive Socket X 1-5/16 Hex

AX 5142

SCKT 1/2" SQ DR 1-5/16" HEX 1-3/4" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.838 lb
Diameter Drive End (C): 1-7/8 in
Diameter Nose End (B): 1-7/8 in

Hex Opening: 1-5/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-3/4 in
Set: No

$77.52

1/2 Sq. Drive Socket X 1-3/8 6 Pt Hex

AX 5144

1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Diameter Drive End (C): 2 in
Diameter Nose End (B): 2 in

Hex Opening: 1-3/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 13/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1-7/8 in

$78.46

1/2 Sq. Drive Socket X 1-5/8 6 Pt Hex

AX 5152

SCKT 1/2" SQ DR 1-5/8" HEX 2" OAL
1/2" Drive - SAE - 6 Point and Double Hex, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 1.518 lb
Diameter Drive End (C): 2-3/8 in
Diameter Nose End (B): 2-3/8 in

Hex Opening: 1-5/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 1-1/8 in
Opening Modifier: 6 Point Hex

Overall Length A: 2 in
Set: No

$147.82

1/2 Sq. Drive Socket X 9/16 6 Pt Hex

AX 5218

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in

$27.03

1/2 Sq. Drive Socket X 5/8 6 Pt Hex

AX 5220

1/2" Drive - SAE - 6 Point and Double Hex, Long & Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Diameter Drive End (C): 1 in
Diameter Nose End (B): 1 in

Hex Opening: 5/8 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 2-1/4 in

$25.00