Airpower | Bits and Sockets

1/2 Sq. Drv Universal Wrench X 19mm Hex

AX SA-510-19M

UNV WRENCH 1/2 SQ DR 19MM HEX 73MM OAL
1/2 inch Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Weight: 0.518 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 26.2 mm

Hex Opening: 19 mm

Overall Length A: 73 mm
Set: No

$112.54

Universal Wrench 21MM, 1/2 Square Drive

AX SA-510-21M

UNV WRENCH 1/2 SQ DR 21MM HEX 73MM OAL
1/2in Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.547 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 28.6 mm

Hex Opening: 21 mm

Overall Length A: 73 mm
Set: No

$195.59

1-1/4 UN WR 1/2 SQ DR 22MM Hex 2.890 Oal, 12/Minimum

AX SA-510-22M

UNV WRENCH 1/2 SQ DR 22MM HEX 73MM OAL
1/2 inch Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Weight: 0.019 lb
Clearance Depth (E): 16.3 mm
Diameter Nose End (D): 31.8 mm

Hex Opening: 22 mm

Overall Length A: 73 mm
Set: No

$133.79

Unv Wrench 1/2 Sq Dr 18Mm Hex 65Mm Oal

AX SA-58-18M

UNV WRENCH 1/2 SQ DR 18MM HEX 65MM OAL
1/2in Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.319 lb
Clearance Depth (E): 17.5 mm
Diameter Nose End (D): 25.4 mm

Hex Opening: 18 mm

Overall Length A: 66 mm
Set: No

$84.49

UNV Wrench 3/8 SQ DR 10MM Hex 47.5MM Oal

AX SA-C-36-10M

UNV WRENCH 3/8 SQ DR 10MM HEX 47.5MM OAL
3/8in Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.020 lb
Clearance Depth (E): 9.5 mm
Diameter Nose End (D): 15.1 mm

Hex Opening: 10 mm

Overall Length A: 48 mm
Set: No

$79.65

3/8in SQ. DR. Universal Socket

AX SA-C-37-13M

UNV WRENCH 3/8 SQ DR 13MM HEX 52.2MM OAL
3/8in Drive 6 Point Metric Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.179 lb
Clearance Depth (E): 11.9 mm
Diameter Nose End (D): 17.5 mm

Hex Opening: 13 mm

Overall Length A: 52 mm
Set: No

$87.04

1/4 Sq. Drv Bit Holder Adapter X 1/4 Hex

AX SC-108

ADAPTR 1/4 SQ DR 1/4 FEM HEX 1-1/4 OAL
Bit Holders/Adapters with Set Screw or Thru Hole

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.086 lb
Body Diameter (D): 3/4 in, 19 mm

Hex Open. (A): 1/4 in
Magnetism: Non-Magnetic

Opening Depth (E): 5/8 in, 16 mm

Set: No

$37.15

Torx Bit T15

AX SD-6104

Torx Bit T15

$2.62

1/4 Sq. Surface Drive Socket X 10mm Hex

AX SF-10MM11

SCKT 1/4 SQ DR 10MM SF-HEX 25.4MM OAL
1/4" Drive - Metric - Surface Drive, Standard and Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.054 lb
Diameter Drive End (C): 15.9 mm
Diameter Nose End (B): 15.9 mm

Hex Opening: 10 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 6.4 mm
Opening Modifier: Surface Drive

Overall Length A: 25.4 mm
Set: No

$15.31

3/8 Sq. Surface Drive Socket X 13mm Hex

AX SF-13MM43

SCKT 3/8 SQ DR 13MM SF-HEX 38.1MM OAL
3/8" Drive - Metric - Surface Drive, Thin Wall, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
No ring groove.

Weight: 0.100 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 19.1 mm

Hex Opening: 13 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 8.7 mm
Opening Modifier: Surface Drive

Overall Length A: 38.1 mm
Set: No

$17.43

1/2 Sq. Surface Drive Socket X 14mm Hex

AX SF-14MM15

SCKT 1/2 SQ DR 14MM SF-HEX 38.1MM OAL
1/2" Drive - Metric - Surface Drive, Short & Standard Length, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.159 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 22.2 mm

Hex Opening: 14 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 38.1 mm
Set: No

$27.12

1/2 Sq. Surface Drive Socket 15mm Hex

AX SF-15MM35

SCKT 1/2 SQ DR 15MM SF-HEX 82.6MM OAL
1/2" Drive - Metric - Surface Drive, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.380 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 23.8 mm

Hex Opening: 15 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 82.5 mm
Set: No

$30.35

1/2 Sq. Surface Drive Socket X 16mm Hex

AX SF-16MM15

SCKT 1/2 SQ DR 16MM SF-HEX 38.1MM OAL
1/2" Drive - Metric - Surface Drive, Short & Standard Length, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.192 lb
Diameter Drive End (C): 25.4 mm
Diameter Nose End (B): 25.4 mm

Hex Opening: 16 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 38.1 mm
Set: No

$22.41

1/2 Sq. Surface Drive Socket X 16mm Hex

AX SF-16MM35

SCKT 1/2 SQ DR 16MM SF-HEX 82.6MM OAL
1/2" Drive - Metric - Surface Drive, Extra Long Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.433 lb
Diameter Drive End (C): 25.4 mm
Diameter Nose End (B): 25.4 mm

Hex Opening: 16 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 82.5 mm
Set: No

$31.79

1/2 Sq. Surface Drive Socket X 17mm Hex

AX SF-17MM15

SCKT 1/2 SQ DR 17MM SF-HEX 38.1MM OAL
1/2" Drive - Metric - Surface Drive, Short & Standard Length, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.257 lb
Diameter Drive End (C): 28.6 mm
Diameter Nose End (B): 28.6 mm

Hex Opening: 17 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 38.1 mm
Set: No

$27.37

1/2 Sq. Surface Drive Socket X 17mm Hex

AX SF-17MM45

SCKT 1/2 SQ DR 17MM SF-HEX 38.1MM OAL
1/2" Drive - Metric - Surface Drive, Thin Wall, Standard Length, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.138 lb
Diameter Drive End (C): 23.8 mm
Diameter Nose End (B): 23.8 mm

Hex Opening: 17 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 11.1 mm
Opening Modifier: Surface Drive

Overall Length A: 38.1 mm
Set: No

$27.63

1/2 Surface Square Drive Socket X 9/16 Hex

AX SF-5118

SCKT 1/2 SQ DR 9/16 SF-HEX 1-1/2" OAL
1/2" Drive - SAE - Surface Drive & Fast Lead, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.010 lb
Diameter Drive End (C): 15/16 in
Diameter Nose End (B): 7/8 in

Hex Opening: 9/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 7/16 in
Opening Modifier: Surface Drive

Overall Length A: 1-1/2 in
Set: No

$19.72

1/2 Sq. Surface Drive Socket X 13/16 He

AX SF-5126

SCKT 1/2 SQ DR 13/16" SF-HEX 1-1/2" OAL
1/2" Drive - SAE - Surface Drive & Fast Lead, Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.313 lb
Diameter Drive End (C): 1-1/4 in
Diameter Nose End (B): 1-1/4 in

Hex Opening: 13/16 in
Magnetism: Non-Magnetic

Opening Depth (D) (in): 17/32 in
Opening Modifier: Surface Drive

Overall Length A: 1-1/2 in
Set: No

$39.78

Socket, 3/8 Sq. Dr., 8mm SF-HEX 1.2, 50in OAL

AX SF-8MM13

SCKT 3/8 SQ DR 8MM SF-HEX 1.250" OAL
3/8" Drive - Metric - Surface Drive, Short and Standard Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.085 lb
Diameter Drive End (C): 19.1 mm
Diameter Nose End (B): 12.7 mm

Hex Opening: 8 mm
Magnetism: Non-Magnetic

Opening Depth (D) (in): 4.8 mm
Opening Modifier: Surface Drive

Overall Length A: 31.7 mm
Set: No

$14.95

1/4in Male Hex Drive

AX SH-629-P

EXT 1/4 MALE HEX DR 1/4 HEX 1-15/16 OAL
Shanks for Reversible Sockets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.028 lb

Male Hex Power Drive: 1/4 in
Male Hex Size: 1/4 in

Overall Length: 2.0 in
Set: No

$16.77

1/4in Male Hex Drive

AX SH-629-P-4

EXT 1/4 MALE HEX DR 1/4 HEX 4 OAL
Shanks for Reversible Sockets

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.061 lb

Male Hex Power Drive: 1/4 in
Male Hex Size: 1/4 in

Overall Length: 4.0 in
Set: No

$49.98

3/8 Sq. Drive Socket Head Bit X 5/32 Hex

AX SZ-11

BIT 3/8 FM SQ SRVDR 5/32 HEX 2-1/4" 57MM
3/8" Drive SAE Socket Head Bits with Square Drive Adapters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.139 lb

Fastener Type: Socket Head

Hex Size: 5/32 in
Length of Insert: 1.375 in, 35mm

Overall Length: 2.25 in, 57.0 mm
Set: No

$23.54

Bit 7/16 Hex PWRDR 5/32in HEX 1-3/8in 35MM

AX SZ-11-A

BIT 7/16 HEX PWRDR 5/32" HEX 1-3/8" 35MM
3/8" Drive SAE Socket Head Bits with Square Drive Adapters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.032 lb

Fastener Type: Socket Head

Overall Length: 1.375 in, 35.0 mm
Set: No

$7.44

3/8 Sq. Drive Socket Head Bit X 1/4 Hex

AX SZ-14

BIT 3/8 SRV DR 1/4" HEX 2-1/4" 57MM OAL
3/8" Drive SAE Socket Head Bits with Square Drive Adapters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.144 lb

Fastener Type: Socket Head

Hex Size: 1/4 in
Length of Insert: 1.375 in, 35mm

Overall Length: 2.25 in, 57.0 mm
Set: No

$23.43

Bit 7/16 Hex Insert 1/4in HEX 1-3/8in 35MM

AX SZ-14-A

BIT 7/16 HEX INS 1/4" HEX 1-3/8" 35MM
3/8" Drive SAE Socket Head Bits with Square Drive Adapters

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.039 lb

Fastener Type: Socket Head

Overall Length: 1.375 in, 35.0 mm
Set: No

$7.95

Bits and Sockets

AX SA-510-19M

AX SA-510-21M

AX SA-510-22M

AX SA-58-18M

AX SA-C-36-10M

AX SA-C-37-13M

AX SC-108

AX SD-6104

AX SF-10MM11

AX SF-13MM43

AX SF-14MM15

AX SF-15MM35

AX SF-16MM15

AX SF-16MM35

AX SF-17MM15

AX SF-17MM45

AX SF-5118

AX SF-5126

AX SF-8MM13

AX SH-629-P

AX SH-629-P-4

AX SZ-11

AX SZ-11-A

AX SZ-14

AX SZ-14-A

Payment options