Airpower | Bits and Sockets

Metal Ret Ring, 3/4 sq dr

AX MET-1600C

CLIP, RETAINING
Metal Ring

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.004 lb

Drive: 3/4" Square

Set: No

$11.85

1/4 Sq. Drive Universal Adapter, Ball

AX MF-25-B

UNV WRENCH 1/4 SQ DR 1/4 SQ 1-41/64 inch OAL
1/4 inch Drive - Male Square to Female Square

Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Universal wrenches must not be used with impact drivers. Maximum operating angle is30 degrees.

Weight: 0.066 lb

Female Square (in): 1/4 in

Largest Diameter: 5/8 in, 16 mm
Male Square Drive (in): 1/4 in

Overall Length: 1.625 in, 41.0 mm
Set: No

$58.06

3/8 Sq. Drive Universal Adapter, Pin

AX MF-27

UNV WRENCH 3/8 SQ DR 1/4 SQ 1-61/64" OAL
3/8in Drive - Male Square to Female Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.025 lb

Female Square (in): 3/8 in

Largest Diameter: 3/4 in, 19 mm
Male Square Drive (in): 1/4 in

Overall Length: 1.31 in, 49.0 mm
Set: No

$111.01

3/8 Sq. Drive Universal Adapter, Pin

AX MF-37

UNV WRENCH 3/8 SQ DR 3/8 SQ 2-13/64" OAL
3/8in Drive - Male Square to Female Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.156 lb

Female Square (in): 3/8 in

Largest Diameter: 3/4 in, 19 mm
Male Square Drive (in): 3/8 in

Overall Length: 2.125 in, 54.0 mm
Set: No

$64.35

1/2 Sq. Driver Universal Adapter, Pin

AX MF-39

UNV WRENCH 1/2 SQ DR 3/8 SQ 2-17/32 inch OAL
1/2 inch Drive 3/8 inch to 3/4 inch Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is30 degrees.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is30 degrees.

Weight: 0.012 lb

Female Square (in): 1/2 in

Largest Diameter: 7/8 in, 22 mm
Male Square Drive (in): 3/8 in

Overall Length: 2.56 in, 65.0 mm
Set: No

$106.59

Universal Wrench

AX MF-50

UNV WRENCH 1/2 SQ DR 1/2 SQ 2-3/4" OAL
1/2in Drive 3/8in to 3/4" Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes
Maximum operating angle is 30 degree .

Weight: 0.338 lb

Female Square (in): 1/2 in

Largest Diameter: 1 in, 25 mm
Male Square Drive (in): 1/2 in

Overall Length: 2.68 in, 68.0 mm
Set: No

$78.46

Universal Wrench

AX MF-50-B

Universal Wrench

$79.22

Nutsetter, 5/16 Hex, Magnetic

AX MHM-1710-4

NUTSET 1/4 MALEHXPWRDR 5/16 HEX 4OAL MAG
1/4" Drive 6 Point SAE Hex Nutsetters for Sheet Metal Screws

Weight: 0.068 lb
Description: Magnetic

Magnetism: Magnetic

Overall Length: 4.0 in
Set: No
Size: 5/16 in

$66.98

1/4 Sq Dr E10 TORX 1in OAL MAG, 12 Pc Minimum

AX MTX-1110

1/4 Sq Dr E10 TORX 1in OAL MAG, 12 Pc Minimum

$109.48

Sckt, 3/8 Sq Dr, E14 Torx, 1-1/4OAL, Mag., 12 Minimum

AX MTX-3414

SCKT 3/8 SQ DR E14 TORX 1-1/4 OAL MAG
3/8" Drive - Torx - For External Torx Screws, Thin Wall, Magnetic & Non-Magnetic

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Some Torx sockets have a DIN (pin and o-ring) groove.

Weight: 0.037 lb
Diameter Drive End (C): 3/4 in, 19 mm
Diameter Nose End (B): 5/8 in, 16 mm

Driver Size: E-14

Magnetism: Magnetic

Opening Modifier: Torx

Overall Length A: 1-1/4 in, 32 mm
Set: No

$83.13

1/4Dr Mag Socket 1/4 6Pt

AX MX-1108

SCKT 1/4 SQ DR 1/4 HEX 7/8 OAL MAG
1/4" Drive - SAE - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Weight: 0.033 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 3/8 in

Hex Opening: 1/4 in
Magnetism: Magnetic

Opening Depth (D) (in): 5/32 in
Opening Modifier: 6 Point Hex

Overall Length A: 7/8 in
Set: No

$18.35

1/4 Sq. Drive Socket X 3/8 6 Pt Hex

AX MX-1112

SCKT 1/4 SQ DR 3/8 HEX 1" OAL MAG
1/4" Drive - SAE - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Weight: 0.052 lb
Diameter Drive End (C): 9/16 in
Diameter Nose End (B): 9/16 in

Hex Opening: 3/8 in
Magnetism: Magnetic

Opening Depth (D) (in): 1/4 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$24.57

Slotted Power Bit

AX NR-320X

Slotted Power Bit

$38.42

Bit 7/16 Hex Insert Dr 7/16in M SQ 1-1/4in, 32MM, 25/minimum

AX P-1414

BIT 7/16 HEXINS DR 7/16" M SQ 1-1/4" 32MM
1/4" to 1/2" Male Square - Male Square Inserts for Pipe Plugs

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.063 lb

Fastener Type: Square

Male Square Drive (in): 7/16 in

Overall Length: 1.25 in, 32.0 mm
Set: No

$69.96

1/4 Hex Power Drive Slotted Bit X 8F-10R

AX P-320X

BIT 1/4HXPWRDRW/SL8F-10RSLT 3-23/32" 94MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.108 lb
Body Diameter: .290 in, 7.37 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 8F-10R
Set: No

$18.28

Quick Release Chuck

AX QR-314

QR CHUCK 3/8 SQ DR 7/16 HEX 2" OAL
Female Square Drive, Quick Releasing Chucks - Bit Holders

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.210 lb

Hex Open. (A): 7/16 in
Magnetism: Non-Magnetic

Opening Depth (F): 1-3/32 in, 28 mm

Set: No
Sleeve Diameter (E): 1-1/4 in, 32 mm

$76.76

1/2 -20 Quick Release Threaded Drive Bit

AX QRF-08

ADAP 1/2-20 FEM THRDDR 1/4 HEX 1-3/4 OAL
Female Threaded Drive, Quick Releasing Chucks

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

Weight: 0.146 lb

Female Thread: 1/2"-20

Hex Opening: 1/4 in
Magnetism: Non-Magnetic

Opening Depth: 61/64 in, 24 mm

Overall Diameter: 3/4 in, 19 mm
Overall Length: 1.75 in, 45.0 mm
Set: No

$120.45

1/4 Hex Power Drive Quick Release

AX QR-M-490-A

MAG BITHLDR 1/4 HEXDR 1/4 HEX 2-57/64 QR
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.092 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 2.9 in, 74.0 mm
Set: No

$33.49

1/4 Hex Power Drive Quick Release 6 OAL

AX QR-M-490-A6

MAG BIT HLDR 1/4 HEX DR 1/4 HEX 6 OAL
1/4" Hex Drive for 1/4" Hex Inserts, Quick Release - Bit Holders

Weight: 0.160 lb
Description: Magnetic, quick release

Magnetism: Magnetic

Overall Length: 6.0 in, 152.0 mm
Set: No

$108.46

1/4 Hex Slotted Power Drive X 10F-12R

AX R-320X

BIT 1/4HXPWRDRW/SL10F-12RSLT3-25/32" 96MM
1/4" Hex Power Drive - Slotted Power Bits with Finder Sleeves

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Finder Sleeve Allows the User to Quickly Align the Screw Head With the Driver
Finder Sleeve Allows the Use of High RPM Drivers on Slotted Screw Applications

Weight: 0.138 lb
Body Diameter: .350 in, 8.89 mm

Drive: Hex Power Drive
Fastener Type: Slotted

Screw Size: 10F-12R
Set: No

$19.51

Spring Pin Retainer

AX RP-314

Spring Pin Retainer

$15.82

Wuc Ab 1/2 F04

AX RP-514

Wuc Ab 1/2 F04

$18.02

3/8 Sq Drv Universal Wrench X 7/16 Hex

AX SA-123

UNV WRENCH 3/8 SQ DR 7/16 HEX 2" OAL
1/2in Drive 6 & 12 Point SAE Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.145 lb
Clearance Depth (E): 1/2 in
Diameter Nose End (D): 19/32 in

Hex Opening: 7/16 in
Magnetism: Non-Magnetic

Opening Modifier: 6 Point Hex

Overall Length A: 2-1/64 in
Set: No

$64.94

Unv Wrench, 1/2 Sq. Drive X 5/8 6 Pt Hex

AX SA-221

UNV WRNCH 1/2 SQ DR 5/8 HEX 2-13/32" OAL
1/2in Drive 6 Point SAE Double Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.255 lb
Clearance Depth (E): 19/32 in
Diameter Nose End (D): 7/8 in

Hex Opening: 5/8 in

Overall Length A: 2-27/64 in
Set: No

$68.85

Unv Wrench, 1/2 Sq. Drive Socket X 3/4 6 Pt. Hex

AX SA-322

UNV WRENCH 1/2 SQ DR 3/4 HEX 2-9/16 OAL
1/2in Drive 6 Point SAE Double Hex Universal Wrenches

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Universal wrenches must not be used with impact drivers. Maximum operating angle is 30 degree .

Weight: 0.345 lb
Clearance Depth (E): 11/16 in
Diameter Nose End (D): 1-1/8 in

Hex Opening: 3/4 in

Overall Length A: 2-37/64 in
Set: No

$87.30

Bits and Sockets

AX MET-1600C

AX MF-25-B

AX MF-27

AX MF-37

AX MF-39

AX MF-50

AX MF-50-B

AX MHM-1710-4

AX MTX-1110

AX MTX-3414

AX MX-1108

AX MX-1112

AX NR-320X

AX P-1414

AX P-320X

AX QR-314

AX QRF-08

AX QR-M-490-A

AX QR-M-490-A6

AX R-320X

AX RP-314

AX RP-514

AX SA-123

AX SA-221

AX SA-322

Payment options