IR 2131PEX
1/2" Air Impact Wrench, ATEX/Hazardous Duty, 600 ft-lb Torque, Pin Retainer, Pistol
Specifically designed to meet ATEX Zone 1 or Zone 2 requirements, this 2130 Series Impact Wrench was built to help you succeed. Reliable and durable from your first to your last job, this wrench will see you through.ATEX Marking: ATEX 2014/34/EU and Ex h IIA T6 Gb XISO 80079-36 Certified
Features And Benefits
- Durability: Thanks to its steel hammer case and composite housing, this wrench will endure anything, from repeated drops to harsh chemicals. It'll never let you down.
- Bronze bushing reduces risk of sparks
- Twin hammer mechanism ensure consistent power and balance
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Feather-touch trigger allows precise delivery of pressure and speed
- Composite Housing is impact and chemical resistant to extend the life of the tool.
- ATEX Marking: ATEX 2014/34/EU and Ex h IIA T6 Gb X
- ISO 80079-36 Certified
Includes: Bare Tool
Product Application and Uses: Hazardous Environment, Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Feather-touch Trigger
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 4.8
Blows per Min: 1250
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1/2
Drive Type: Square
Duty Rating: Atex/Hazardous Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 86.4 / 97.4
Hammer Case: Steel
Handle Material: Composite
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 90.4 / 101.4
Max Bolt Diameter (in): 9/16
Max Free Speed (rpm): 10250
Max Pressure (bar): 6.2
Max Torque (ft-lb): 600
Max Torque (in-lb): 7196
Max Torque (nm): 813
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 4
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 122
Product Length (in): 7.3
Product Width (in): 2.7
Product Height (in): 7.2
Product Weight (lb): 4.9
Recommended Forward Torque Range (ft-lb): 450
Recommended Forward Torque Range (in-lb): 5399
Recommended Forward Torque Range (nm): 610
Retainer Type: Pin Detent
Side to Center Distance (in): 1.35
Side to Center Distance (mm): 34
Special Features: ATEX Rated
Standards/Certifications: Atex 2014/34/Eu, Atex Ex H Iia T6 Gb X, Iso 80079-36
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 8.31
Warranty: 1-year
