Valves and Cylinders

GG V25FS200DA

GG V25FS200DB

GG V25FT000BA

IQ TIP SEAL VALVE, 25, 1.3/T, 000, ADJ/SOL, AMB

Graco V25FT000BA iQ Dispense Valve, Tip-Seal, Ambient, 0.051in (1.3mm) Tip, 0in (000mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.051
• Nozzle Size (mm): 1.3

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

GG V25FT000BB

IQ TIP SEAL VALVE, 25, 1.3/T, 000, ADJ/SOL, WEL

Graco V25FT000BB iQ Dispense Valve, Tip-Seal, Heated, 0.051in (1.3mm) Tip , 0in (000mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Operating Temperature (°C): 70
• Maximum Operating Temperature (°F): 158

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.051
• Nozzle Size (mm): 1.3

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

• Phase: 1

• Power Rating (W): 100

GG V25FT000DA

GG V25FT000DB

GG V25FT060BA

IQ TIP SEAL VALVE, 25, 1.3/T, 060, ADJ/SOL, AMB

Graco V25FT060BA iQ Dispense Valve, Tip-Seal, Ambient, 0.051in (1.3mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.051
• Nozzle Size (mm): 1.3

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

GG V25FT060BB

IQ TIP SEAL VALVE, 25, 1.3/T, 060, ADJ/SOL, WEL

Graco V25FT060BB iQ Dispense Valve, Tip-Seal, Heated, 0.051in (1.3mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Operating Temperature (°C): 70
• Maximum Operating Temperature (°F): 158

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.051
• Nozzle Size (mm): 1.3

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

• Phase: 1

• Power Rating (W): 75

GG V25FT060DA

GG V25FT060DB

GG V25FT200BA

IQ TIP SEAL VALVE, 25, 1.3/T, 200, ADJ/SOL, AMB

Graco V25FT200BA iQ Dispense Valve, Tip-Seal, Ambient, 0.051in (1.3mm) Tip, 7.87in (200mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.051
• Nozzle Size (mm): 1.3

• Outlet Block Length (in): 7.9
• Outlet Block Length (mm): 200

GG V25FT200BB

GG V25FT200DA

GG V25FT200DB

GG V25GB000BA

GG V25GB000BB

GG V25GB000DA

GG V25GB000DB

GG V25GB060BA

GG V25GB060BB

IQ BALL SEAT VALVE, 25, 1.7/B, 060, ADJ/SOL, WEL

Graco V25GB060BB iQ Dispense Valve, Ball/Seat, Heated, 0.067in (1.7mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Ball and Seat Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Perfect for standard on/off applications
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Warm Melt
• Applicator Type: Ball/Seat

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Operating Temperature (°C): 70
• Maximum Operating Temperature (°F): 158

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.067
• Nozzle Size (mm): 1.7

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

• Phase: 1

• Power Rating (W): 75

GG V25GB060DA

GG V25GB060DB

GG V25GB200BA

GG V25GB200BB

GG V25GB200DA