Sanders, Polishers, Buffers

DY 13525

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8in -11 Arbor

Dynastraight Versatility Kit, including Finishing Tool and DynaWheel.

For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites

• HP: 1.0
• Max. RPM: 3400.0

DY 14000

.5 hp, Straight-Line, 20,000 RPM, Front Exhaust, for 1/8in -1/2in W x 24in L (3-13 mm x 610 mm) Belts

World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more!

Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 14010

.5 hp, Straight-Line, 20,000 RPM, Front Exhaust, for 1/8in -1/2in W x 24in L (3-13 mm x 610 mm) Belts

World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more! Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.

Tool includes 11218 Contact Arm for standard use. Also accepts a variety of additional Contact Arms. Work in areas as small as 3/8in diameter. Superior belt tracking permits use of abrasive belts 1/8in , 1/4in or 1/2in wide x 24in long.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 14300

1.2 hp, Straight-Line, 13,000 RPM, Front Exhaust, for 2in W x 34in L (51 mm x 864 mm) Belts

Polish, grind contours and flats. Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard. fast belt change.

Single Motor model uses 2in x 34in belts. belts spans 11-1/2in for strap polishing up to 36in diameter pipe.

• HP: 1.2
• Max. RPM: 13000.0
• Motor RPM: 13000

DY 14303

2.4 hp, Straight-Line, 13,000 RPM, Front Exhaust, for 2in W x 34in L (51 mm x 864 mm) Belts

Polish, grind contours and flats. Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard. fast belt change.

Heavy-Duty 'Dual Motor' with Platen offers extra power. Uses 2in x 34in belts. belts spans 11-1/2in for 'strap polishing' up to 36in diameter pipe.

• HP: 2.0
• Max. RPM: 13000.0
• Motor RPM: 13000

DY 14360

.7 hp (522 W) 3,400 RPM, Rear Exhaust, 1/2in to 1-1/2in x 30in (13 mm to 38 mm x 762 mm) Belts

Air-powered Pipe Belt Finisher achieves top-quality finishes on rounded surfaces in record time! Sand, blend, surface condition, polish and finish on metals such as stainless steel and aluminum. An essential tool for metal and railing fabrication, plus pharmaceutical equipment, food industries and more!

Accepts abrasive belts in widths of 1/2in to 1-1/2in , by 30in in length (13 mm to 38 mm x 762 mm). For use on rounded surfaces from 3/8in to 6in in diameter (10 mm - 152 mm).

• HP: 0.7
• Max. RPM: 3400.0
• Motor RPM: 3,400

DY 15003

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8in -1/2in W x 12in L (3-13 mm x 305 mm) Belts

Ideal for strap polishing and working in narrow openings. Tool includes 15026 Contact Arm for 1/2in wide x 12in long abrasive belts and 15118 Drive Wheel.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.

• HP: 0.40
• Max. RPM: 25000.0
• Motor RPM: 25000

DY 15006

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8in -1/2in W x 12in L (3-13 mm x 305 mm) Belts

Ideal for strap polishing and working in narrow openings. Kit includes 15003 Tool (15118 Drive Wheel) with 15026 Contact Arm for 1/2in wide x 12in long abrasive belts. Also includes 15028 and 15030 Arms.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25000

DY 15300

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -1in W x 18in L (6-25 mm x 457 mm) Belts

Excellent for grinding welds, blending and deburring. Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 15302

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -1in W x 18in L (6-25 mm x 457 mm) Belts

Excellent for grinding welds, blending and deburring. Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Includes 15300 Dynafile III with 15321, 15350 and 15357 Contact Arms, plus assortment of abrasive belts, spare 15336 Drive Wheel, wrenches and hex keys, all in durable carrying case.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 15420

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 1/4in , 1/2in W x 24in L (6 mm, 13 mm x 610 mm) Belts

Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.

Includes 11702 Contact Arm with unique 4in diameter wheel, for grinding or blending right angle welds and fillit welds. Contact Arm includes hand guide for additional control. Saves time and reduces costs!

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 18050

DY 40320

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -3/4in W x 18in L (6-19 mm x 457 mm) Belts

Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad. finish and polish using slack of belt.

Tool includes 11206 Contact Arm for 3/4in wide x 18in long abrasive belts.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40321

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -3/4in W x 18in L (6-19 mm x 457 mm) Belts

Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad. finish and polish using slack of belt.

Kit includes 40320 Dynafile II with 11206 Contact Arm, plus additional 11203 and 11204 Contact Arms.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40326

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 1/4in -3/4in W x 20-1/2in L (6-19 mm x 521 mm) Belts

Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad. finish and polish using slack of belt.

Lightweight, ergonomic 7 degree offset design. Grinding head pivots 360 degrees for securing in most efficient position.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40330

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, 1/4-3/4in W x 18-24in L (6-19 mm x 457-610 mm) Belt

Vacuum Dynafile II allows you to vacuum while you work. Highly portable vacuum system works on tool's exhaust.

Includes self-contained 'bag-within-bag' dust collection system (50683 Reusable Felt Bag). One-micron filter rating. Bag traps over 99% of vacuum particles one micron or larger. Hook-Face Closure. Also sold separately.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40335

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4in -3/4in W x 18in L (6-19 mm x 457 mm) Belts

Designed exclusively for use with non-woven nylon belts. Excellent for setting grain lines, achieving consistent satin finishes on metals, removing oxide and weld discoloration.

40375 Rubber Drive Wheel minimizes non-woven nylon belt slippage. Straight belt path extends abrasive life.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 40352

.4 hp, 7 Degree Offset, 25,000 RPM, Front Exhaust, for 1/8in -3/4in W x 18in L (3-19 mm x 457 mm) Belts

.4 hp Dynafile II adds a lightweight, compact variation to Dynabrade?s famous Abrasive Belt Tool line. Includes 11203 Contact Arm, for coated abrasive belts 1/2in wide x 18in long.

Grind, deburr, blend, finish and polish. Grind from contact wheel or platen pad. finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, glass and more.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 40353

.4 hp, 7 Degree Offset, 25,000 RPM, Front Exhaust, for 1/8in -3/4in W x 18in L (3-19 mm x 457 mm) Belts

.4 hp Dynafile II adds a lightweight, compact variation to Dynabrade?s famous Abrasive Belt Tool line. Includes 11203 Contact Arm for 1/2in wide x 18in long medium non-woven nylon belt (90292).

Designed exclusively for use with non-woven nylon belts.Excellent for setting grain lines, achieving consistent satin finishes on a variety of metals, and removing oxide and weld discoloration.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 40610

10,500 RPM, 120 V (AC), 7 Amp, 60 Hz, for 1/8in -3/4in W x 18-34in L (3-19 mm x 457-864 mm) Belts

Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, fiberglass, solid surface, stone, glass etc.

Grind with contact wheel or platen pad. Finish and polish using slack of belt. Tool accepts over 20 interchangeable contact arms, for use with belts 1/4in to 3/4in wide by 18in long. Can accept 1/8in wide or 24in long belts with purchase of additional contact arms (not included).

• HP: 1.0
• Max. RPM: 10500.0

DY 40611

10,500 RPM, 120 V (AC), 7 Amp, 60 Hz, for 1/8in -3/4in W x 18-34in L (3-19 mm x 457-864 mm) Belts

Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, fiberglass, solid surface, stone, glass etc.

Grind with contact wheel or platen pad. Finish and polish using slack of belt. Tool accepts over 20 interchangeable contact arms, for use with belts 1/4in to 3/4in wide by 18in long. Can accept 1/8in wide or 24in long belts with purchase of additional contact arms (not included).

• HP: 1.0
• Max. RPM: 10500.0

DY 47820

.4 hp, 12,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 12000.0
• Motor RPM: 12,000

DY 47821

.4 hp, 15,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 15000.0
• Motor RPM: 15,000

DY 47822

.4 hp, 20,000 RPM, Geared, Front Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 48410

.7 hp, 15,000 RPM, Front Exhaust

• HP: 0.7
• Max. RPM: 15000.0
• Motor RPM: 15000