Sanders, Polishers, Buffers

DY 59180

.25 hp, 12,000 RPM, 3/32in (2 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. Black lever identifies 3/32in (2.5 mm) Diameter orbit, used for ultra-fine sanding.

Drop-In Motor available (sold separately) to reduce costly down-time associated with routine maintenance. More Power - True 12,000 RPM air motor. Floating rotor utilizes five blades, producing more usable power (.25 hp/186 W). High-strength, composite rotor has better lubricating qualities, allowing blades to last longer. Less air (2CFM/14 SCFM/396 LPM) is used more efficiently to maintain maximum power.

• Max. RPM: 12000.0
• Motor RPM: 12000

DY 59500

DY 78234

Polishing Product for use on Aluminum. Begin with 78234 (Brown), followed by 78235 (Mint Green), finish with 78233 (Christmas Green).

Polishing Product for use on Brass. Begin with 78234 (Brown), followed by 78235 (Mint Green), finish with 78236 (Red Rouge)

DY DN1

Rear Exhaust, For 1/4in -20 Female Thread Type Pad

Very low vibration reduces hand and arm fatigue providing ultimate results to sensitive workpieces or when sanding/repairing a coated surface.

Ultra-lightweight, at just 1 pound (.45 kg) with small ergonomic pistol grip design, the Mini Orbital Sander reduces the likelihood of repetitive motion injuries during extended use.

• HP: .02 (15)
• Max. RPM: 8500

DY DS32

.3 hp, 18,000 RPM, Rotational Side Exhaust, TR Locking Female Pad

Compact, lightweight contemporary tool design permits easy access to tight areas

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.3
• Max. RPM: 18000.0
• Motor RPM: 18,000

DY DS53

.5 hp, 14,000 RPM, Rotational Side Exhaust, TR Locking Female Pad

Compact, lightweight contemporary tool design permits easy access to tight areas

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.5
• Max. RPM: 14000.0
• Motor RPM: 14,000

DY DYS1

800-3,000 RPM, 120 V (AC), 9 Amp, 1 Phase, 60 Hz, 3/4in (19 mm) Diameter Arbor

The Dynabrade Nitro Series Electric Dynisher will give the user the professional results they desire. This powerful tool is excellent for blending and finishing stainless steel leaving an in-line scratch pattern. Additionally, it is perfect for use on other metals, as well as plastics, composites and more.

New lower center-of-gravity makes it easier to control the tool and keep the line grain straight. Compact, right angle tool configuration with spindle lock for quick wheel changes. Multi purpose arbor accepts Dynacushion Pneumatic Wheel and Non-Woven Nylon Wheels.

• Motor RPM: 3,000

DY EB3

3/8in -24 Spindle, .5hp

Compact, lightweight contemporary tool design

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.5
• Max. RPM: 2700.0
• Motor RPM: 2,700

DY MNF1

.4 hp, 7 Degree Offset Handle, Gearless, 1/2in wide x 12in length belts

ldeal for strap polishing and working in narrow openings. Sand and deburr in tight spots.

Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY NS11

0-2,800 RPM, 1 hp, 3/4in (19 mm) Diameter Orbit

The Dynabrade Nitro Series&trade. 11in Diameter Random Orbital Sander will give the user the professional results they desire. This powerful tool with proportionate 3/4in diameter orbit assures a swirl-free finish on a variety of surfaces. Additionally, it is perfect to quickly remove heavy oxidation and correct surface imperfections on large areas.

Powerful 1 hp, 2,800 RPM motor offers high torque and power, 43% higher hp than previous model. The sander weight/balance allows the operator to let the tool do the work on large horizontal surfaces. Soft grip insulated handle reduces cold air transmission to the operator.

• HP: 1.0
• Max. RPM: 2800.0
• Motor RPM: 2,800

DY NZ1

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. The NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1 includes Standard Tool, 92239 3/4in Wheel Hub Assembly and 92255 RED-TRED®. Zip Eraser Wheel. Accessories sold separately: 92252 1/2in Wheel Hub Assembly, 92248 1/2in Coarse Wire Wheel, 92245 3/4in Coarse Wire Wheel.

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

• HP: 0.5
• Max. RPM: 3500.0
• Motor RPM: 20,000

DY NZ1K

.5 hp, Right Angle, 3,500 RPM, Rear Exhaust

Using the Dynabrade Nitro Series&trade. NitroZip Surface Preparation Tool equipped with a wire wheel allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components. When equipped with an eraser wheel the NitroZip removes adhesive-backed decals and lettering without damaging the clear and paint below. NZ1K INCLUDES: NZ1 Standard Tool, 92252 1/2in Wheel Hub Assembly (1), 92248 1/2in Coarse Wire Wheel (1), 92239 3/4in Wheel Hub Assembly (1), 92245 3/4in Coarse Wire Wheel (1), 92255 RED-TRED®. Zip Eraser Wheel (1)

Using an eraser wheel the Dynabrade Nitro Series&trade. NitroZip quickly removes decals without harming the paint, as well as removing adhesives without smearing on the painted surface. Excellent for removing two-sided adhesive molding tape and decal material with use of rubber eraser wheel Eraser Wheel has serrations for improved cooling effect air flow. Also resists heat buildup and reduces jumping and vibration

DY RB1

1 hp, 5/8in -11 Spindle, 2,800 RPM

Dynabrade Nitro Series buffers polish large areas like hoods and trunk lids quickly and with consistent results.

2,800 RPM free speed. Accepts 5in to 8in diameter buffing pads. Lightweight and compact in size

DY RB3

800 - 3,000 RPM, 110 V, 1000 Watt, 5/8in -11 Spindle Thread

Powerful 1000-watt motor is well suited detail applications

Well balanced, right angle tool configuration provides easy operator control Thumb controlled variable speed dial offers six speed selection options between 800 - 3000 RPM

DY ROB1

1,800-4,400 RPM, 110V, 1000 Watt, 5/16in -24 Female Thread, 21 mm Orbit

Powerful 1000-watt motor is well suited detail applications Well balanced, right angle tool configuration provides easy operator control

Thumb controlled variable speed dial offers six speed selection options between 1,800 - 4,400 RPM Front grip cover, adjustable/removable D handle and ergonomic throttle handle design offer multiple grip positions during use

• Motor RPM: 4,200

DY RS1

Straight Line, 3/8in Stroke Length, 9,000 SPM

The perfect tool for cutting materials such as plastics, fiberglass, composites, aluminum and sheet metal

Small, lightweight design provides greater accessibility and increases operator productivity

DY X31

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000

DY X3151H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161H

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X3161V

12,000 RPM, 3/16in (5 mm) Diameter, Rear Exhaust

DY X31V

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000

DY X32

DY X3252V

12,000 RPM, 3/32in (2.4 mm) Diameter, Rear Exhaust

DY X3262V

12,000 RPM, 3/32in (2.4 mm) Diameter, Rear Exhaust

DY X51

.3 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, PSA

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000