Sanders, Polishers, Buffers

IR 317A-A11

IR 317A-A12

IR 4151

MIR MR-5

DY 58500

.11 hp, 10,000 RPM, 3/32in (2 mm) Diameter Orbit, Rear Exhaust

Powerful .15 hp (112 W), 10,000 RPM air motor gets the job done in countless applications, utilizing just 13 SCFM (368LPM) at 90 PSI (6.2 Bar).

Precise 3/32in orbital motion is ideal for achieving a controlled, ultra-fine finish on a variety of surfaces. Compact size is ideal for all operators, including those with smaller hands.

• HP: 0.15
• Max. RPM: 10000.0

DY 58509

.11 hp, 10,000 RPM, 3/32in (2 mm) Diameter Orbit, Rear Exhaust

Powerful .15 hp (112 W), 10,000 RPM air motor gets the job done in countless applications, utilizing just 13 SCFM (368LPM) at 90 PSI (6.2 Bar).

Precise 3/32in orbital motion is ideal for achieving a controlled, ultra-fine finish on a variety of surfaces. Compact size is ideal for all operators, including those with smaller hands.

• HP: 0.15
• Max. RPM: 10000.0

IR 5151-6

CL C3120ASDR-58OH

DY 57400

.3 hp, 2,400 SPM, 3/8in (10 mm) SL, Rear Exhaust

2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8in (10 mm) stroke length.

Uses PSA coated and non-woven nylon sheets and rolls

• HP: 0.3
• Max. RPM: 2400.0
• Motor RPM: 2400

DY 59010

.25 hp, 12,000 RPM, 3/8in (10 mm) Diameter Orbit, Rear Exhaust

Includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. Blue lever identifies 3/8in (10 mm) Diameter orbit, used for aggressive sanding.

Drop-In Motor available (sold separately) to reduce costly down-time associated with routine maintenance. More Power - True 12,000 RPM air motor. Floating rotor utilizes five blades, producing more usable power (.25 hp/186 W). High-strength, composite rotor has better lubricating qualities, allowing blades to last longer. Less air (14 SCFM/396 LPM) is used more efficiently to maintain maximum power.

• HP: 0.25
• Max. RPM: 12000.0
• Motor RPM: 12000

DY EB3

3/8in -24 Spindle, .5hp

Compact, lightweight contemporary tool design

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.5
• Max. RPM: 2700.0
• Motor RPM: 2,700

MPT MP-6133-6VSA

DY 40610

10,500 RPM, 120 V (AC), 7 Amp, 60 Hz, for 1/8in -3/4in W x 18-34in L (3-19 mm x 457-864 mm) Belts

Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, fiberglass, solid surface, stone, glass etc.

Grind with contact wheel or platen pad. Finish and polish using slack of belt. Tool accepts over 20 interchangeable contact arms, for use with belts 1/4in to 3/4in wide by 18in long. Can accept 1/8in wide or 24in long belts with purchase of additional contact arms (not included).

• HP: 1.0
• Max. RPM: 10500.0

DY 50350

1.2 hp, 6,000 RPM, Side Exhaust, 5/8in -11 Spindle Thread

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.

7in Diameter, Right Angle, 1.2 hp, Side Exhaust, 6,000 RPM.

• HP: 1.2
• Max. RPM: 6000.0
• Motor RPM: 6000

DY 58502

.11 hp, 10,000 RPM, 3/32in (2 mm) Diameter Orbit, Rear Exhaust

Powerful .15 hp (112 W), 10,000 RPM air motor gets the job done in countless applications, utilizing just 13 SCFM (368LPM) at 90 PSI (6.2 Bar).

Precise 3/32in orbital motion is ideal for achieving a controlled, ultra-fine finish on a variety of surfaces. Compact size is ideal for all operators, including those with smaller hands.

• HP: 0.15
• Max. RPM: 10000.0

DY X52V

.3 hp, 12,000 RPM, 3/32in (2.5 mm) Diameter Orbit, Rear Exhaust, Hook-Face

EXTREME POWER: New motor design has the highest power-to-weight ratio in the industry, with 0.3 hp at 1.8 lbs. Most consistent speed under load in industry, running at 92% of rated tool speed. New rotor design enhances power with less friction.

EXTREME COMFORT: Ergonomic design with integrated comfort platform for more wrist support and overall operator comfort. Soft grip co-molded to rigid composite base housing for maximum comfort and durability. Recessed throttle lever eliminates pinch and pressure points on an operator's palm.

• HP: 0.3
• Max. RPM: 12000.0
• Motor RPM: 12,000

SX 1287L

DY 48542

.4 hp, 20,000 RPM, Geared, Rear Exhaust, Locking-Type Female Pad

Includes 51344 Locking-Type Pad (2in diameter). Also accepts 3in diameter pads, sold separately.

Governor-controlled motor maintains speed under load.

• HP: 0.4
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 56826

.28 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust (56107)

Non-Vacuum Dynorbital Supreme includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits available, to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. 3/16in (5 mm) diameter orbit.

Dynorbital Supreme models run at 12,000 RPM. Rotor utilizes five blades and produces more useable power. Composite rotor is stronger and has better lubricating qualities, enabling blades to last longer.

• HP: 0.28
• Max. RPM: 12000.0
• Motor RPM: 12000

DY 59084

DY DS32

.3 hp, 18,000 RPM, Rotational Side Exhaust, TR Locking Female Pad

Compact, lightweight contemporary tool design permits easy access to tight areas

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration

• HP: 0.3
• Max. RPM: 18000.0
• Motor RPM: 18,000

DY DYS1

800-3,000 RPM, 120 V (AC), 9 Amp, 1 Phase, 60 Hz, 3/4in (19 mm) Diameter Arbor

The Dynabrade Nitro Series Electric Dynisher will give the user the professional results they desire. This powerful tool is excellent for blending and finishing stainless steel leaving an in-line scratch pattern. Additionally, it is perfect for use on other metals, as well as plastics, composites and more.

New lower center-of-gravity makes it easier to control the tool and keep the line grain straight. Compact, right angle tool configuration with spindle lock for quick wheel changes. Multi purpose arbor accepts Dynacushion Pneumatic Wheel and Non-Woven Nylon Wheels.

• Motor RPM: 3,000

DY RB3

800 - 3,000 RPM, 110 V, 1000 Watt, 5/8in -11 Spindle Thread

Powerful 1000-watt motor is well suited detail applications

Well balanced, right angle tool configuration provides easy operator control Thumb controlled variable speed dial offers six speed selection options between 800 - 3000 RPM

DY RS1

Straight Line, 3/8in Stroke Length, 9,000 SPM

The perfect tool for cutting materials such as plastics, fiberglass, composites, aluminum and sheet metal

Small, lightweight design provides greater accessibility and increases operator productivity

DY X31

.1 hp, 12,000 RPM, 3/16in (5 mm) Diameter Orbit, Rear Exhaust, Hook Pad

Integrated speed control allows for fine adjustment of RPM for artistic results, sensitive workpieces, or when sanding/repairing a coated surface.

Ultra-lightweight, just over 1 pound (.5 kg) - 35% lighter when compared to 5" and 6" Dynorbital®. Extreme. Reduces fatigue and the likelihood of repetitive motion injuries during extended use.

• HP: 0.1
• Motor RPM: 12,000