Parts

GG 561471

ROD, TIE, LOWER, MGO-4

GG 562586

Bearing, Assembly, 5/8 Id

GG 562813

MXP VALVE, TWIN 25T

Trabon® MXP Modular Divider Valve - MXP-25T - 0.025 in³ (0.41 cm³)

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

Ideal for heavy-duty and large bearing applications with wide temperature variations and high volume requirements. Quick change valve sections can be removed from the base assembly without disturbing any lube lines–minimizing labor cost and maximizing your machine uptime Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Robust design is virtually indestructible and built to perform in extreme environments Lubriquip part number 106-300-010

GG 562888

5 Lb Plastic Cylindrical Grease Resevoir

GG 562905

6 lb. (2.71 kg) Plastic Cylindrical Grease Reservoir

GG 563131

BLOCK, SPINDL-GARD, .0030

High Speed Spindl-Gard (HSSG) Block - 0.0030 cu in displacement For use with Air Oil High Speed Spindl-Gard® Systems.

0.0030 in3 displacement

Lubriquip part number 484-095-229

GG 563153

SWIVEL, BEARING, 90DEG, 3/8 NPT

Ball Bearing 90º Angle Swivel - 3/8 inch

90º Angle Swivel - 3/8 inch

Lubriquip part number 503-704-002

GG 563158

VALVE, RELIEF, 1/4 NPT, 1500 PSI

Automatic Relief Indicator for MX Divider Valves, 1500 psi (103 bar)

Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.

No time or effort required for reset after blockage is cleared Easy information on blocked lines, high system pressure or blocked bearings Works with MSP, MX, MXP, MJ and MHH divider valves Lubriquip part number 508-210-150

GG 563164

Automatic Relief Indicator for MSP, MXP, MHH and MJ Divider Valves, 1000 psi (69 bar)

GG 563166

Automatic Relief Indicator for MSP, MXP, MHH and MJ Divider Valves, 1500 psi (103 bar)

GG 563196

VALVE, CHECK, 1/8 NPT, 5000

Single Ball Check Valve - 35 psi Nominal Cracking Pressure, 1/8 in NPTF (M) x 1/8 in NPSF (F), Steel, 5,000 psi

Single Ball Check Valve

35 psi nominal cracking pressure

1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)

steel body/ball

5,000 psi max

Lubriquip part number 509-350-030 Trabon part number 9350-35

GG 563217

INDICATOR, RUPTURE, 1/8 NPTF, 5500 PSI

Replacement Rupture-to-Atmosphere Indicator, 1/8 in NPTF, 5500 psi Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Lubriquip part number 509-494-140 Trabon part number 9494-140

GG 563237

INDICATOR, MAN RESET 2500 PS MJ/MSP

Reset Indicator with Memory, 2500 psi (172 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

Provides quick troubleshooting tool with visual indication No tools for reset or parts to replace after indication Easy information on blocked lines, high system pressure or blocked bearings Lubriquip part number 509-931-070

GG 563273

SWITCH, SUBMERSIBLE, SPDT

Graco 563273 Cycle Switch (SPDT) and Bracket Assembly, Moisture-Resistant - MJ, MS, MHH and MXP Divider Valves

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

• Provides positive feedback based on actual metering piston movement
• Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install
• Able to be set for normally open or normally closed operation

GG 563276

SPRA VALVE, SPRAY 8 IN DIA

Air-lube Control Valve and Nozzle Assembly - 8 in. spray diameter, wide

Conserves air–air required only during spray interval

Versatile–can be used with any centralized lube system or mechanical oiler and will handle grease or oil

External mix nozzle purges itself and prevents clogging

Saves lubricant by spraying smaller amounts at frequent intervals, provides better film, with no waste

8 in. spray diameter, wide

Lubriquip part number 510-652-230 Trabon part number 10652-W

GG 563505

Switch, Elect Lube Sentry

GG 563512

FILTER, 25 MICRON INLINE 1/4 NPT

In-Line Oil Filters - High Pressure, 7500 psi, 1/4-18 NPTF, 25 Micron For use with High Pressure In-Line Oil Filters.

25 micron In-Line Oil Filter, NPT

Lubriquip part number 527-100-591 Direct replacement for Lubriquip part number 527-100-240 and 527-100-590 Replacement element is Graco part number 563510

GG 563525

KIT, CROSSPORT BAR, MXP, RH

Trabon® MXP Divider Valves - Right Cross Port Bar For use with Trabon® MXP Divider Valves. Cross Port Bar (Right) Lubriquip part number 527-300-980

GG 563580

LUBRISYSTEM PUMP, HAND

LubriSystem Hand-Operated Pump - Pump Body without Reservoir

Sturdy construction of aluminum and steel to provide years of service. Compact design can be used in areas where space is limited. Rugged bracket allows the pump package to be mounted in place in any application.

The LubriSystem hand pump package offers versatility for use in any application, large or small. Great for operation with Injectors or Piston Distributors, with oil or grease.

General machinery lubrication where power is limited or not available

Bracket-mount design for easy installation

Rugged design for years of operation

Built-in pressure venting for use with injectors

Lubriquip part number 550-000-520

GG 563918

Kit, Piston 1/4 Mvb Pump

GG 563961

KIT, BURST DISK 5000 BROWN 25PK

Blowout Disc Kit - (25) Brown, 5000 psi, 3/8 in.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Packs of 25 (3/8 inch / 9.5 mm diameter discs)

5,000 psi - brown

Lubriquip part number 560-900-140 Trabon part number MV-617-35

GG 563963

KIT, B/O DISC 1750 RED

Graco 563963 Blowout Disc Kit - (6) Red, 1750 psi, 11/16 in.

• Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 1,750 psi - red
• Lubriquip part number 560-900-280

• Color: Red

• Maximum Working Pressure (bar): 121
• Maximum Working Pressure (kPa): 12058
• Maximum Working Pressure (MPa): 12.1
• Maximum Working Pressure (psi): 1750

• Number of Pieces: 6

• Overall Diameter (cm): 1.7
• Overall Diameter (in): 0.688

• Overall Diameter (mm): 17