Parts
Cabinet, Sure-Grip EX Vertical Drum
JR 899170
JR 899170
Cabinet, Sure-Grip EX Vertical Drum
$4,708.00
General Purpose 10 ft Non-Lighted Whip, Qd, Orange Flag White X
JR FS10X-SPQD-O
JR FS10X-SPQD-O
General Purpose 10 ft Non-Lighted Whip, Qd, Orange Flag White X
Call for pricing
Eagle Haz-Mat Two Drum Vertical Safety Cabinet, 110 Gal., 1 Shelf, 2 Door, Manual Close, Yellow
JR HAZ1955X
JR HAZ1955X
Eagle Haz-Mat Two Drum Vertical Safety Cabinet, 110 Gal., 1 Shelf, 2 Door, Manual Close, Yellow
$4,066.00
MOUNTING CHASSINS FOR TWO REELS
RC 600295
RC 600295
MOUNTING CHASSINS FOR TWO REELS
Call for pricing
Bracket One Bank/ Channel/ Cabinet Mounting
RC 600370
RC 600370
Bracket One Bank/ Channel/ Cabinet Mounting
Call for pricing
Dekor 20B Airbrush, 0.35, w/ 65ccm Cup
SATA 65581
SATA 65581
Dekor 20B Airbrush, 0.35, w/ 65ccm Cup
Call for pricing
Dekor 20B Airbrush, 1.0, w/ 65ccm Cup
SATA 69229
SATA 69229
Dekor 20B Airbrush, 1.0, w/ 65ccm Cup
Call for pricing
Model STT-150-L
STR 10262
STR 10262
Torque Transducers: L Series
| Model | : | STT-L 150 | |
| Torque Range (ft-lb) | : | 15-150 lbf-ft | |
| Torque Range (nm) | : | 20.3-203.4 Nm | |
| Torque Range (in.lb) | : | 180-1800 lbf in | |
| Torque Range (kgf-cm) | : | 207.4-2073.8 kg cm | |
| Male Hex | : | 0.5 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$2,555.84
RD Fixture
STR 10351
STR 10351
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 6Nm 1/4 F HEX | |
| Capacity (Nm) | : | 6 Nm |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$452.42
15 Deg. Angle Extension LTCE - 4 - 15
STR 819487
STR 819487
15 Degree Interchangeable Heads for Torque Wrenches
| Model | : | LTCE 4-15 | |
| Head Depth (in) | : | 3/8 in | |
| Angle | : | 15 Degrees |
Product Description
- Preset torque wrench must always be preset after the extension and the fastener engagement interchangeable head has been attached
- 15-degree bend in the extension; fastener engagement will be 15 degrees off the tool centerline
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$520.11
SDRT 3/8 Soc. Lock Pin
STR 853305
STR 853305
Socket Lock Pin Interchangeable Heads for Torque Wrenches
| Model | : | SDRT 3/8 SOC LOCK PIN | |
| Capacity | : | 1250 lbf in | |
| Square | : | 3/8 in |
| A | : | 2.00 in | |
| B | : | 1.50 in | |
| C | : | 1.25 in | |
| D | : | 1.00 in | |
| E | : | .5625 in |
Product Description
- 1 7 16 Common Centerline / 36.5 mm Common Centerline
$511.59
Thru-Hole Air Ratchet Wrench, Free Speed: 300 Rpm, Max Torque: 40 ft/lb (54Nm), with 3 socket (10,12,13mm) 3/8in Dr Adaptor, 1/4in Bit Holder
SUM ST-5510
SUM ST-5510
Thru-Hole Air Ratchet Wrench, Free Speed: 300 Rpm, Max Torque: 40 ft/lb (54Nm), with 3 socket (10,12,13mm) 3/8in Dr Adaptor, 1/4in Bit Holder
$139.00
RITTAL, FILTER FAN 15CFM, 115V, 50/60 HZ
TA 3237110
TA 3237110
RITTAL, FILTER FAN 15CFM, 115V, 50/60 HZ
Call for pricing