Parts

GG GG3519

GG GG3613

GG GG3617

GG GG4211

GG GG4419

GG GG4423

GG GG4425

GG GGW519

GG HEH006

LDX SERIES REEL, HOSE, 3/8in X 50', GREASE

Graco HEH006 LDX Series, Grease, 3/8 in (10 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT

Graco's industrial-grade LDX hose reel offers incredible value for cost-conscious workshops. Its all-metal frame and specially crafted, long-lasting components provide consistent release and retraction.

• Dual Pedestal Frame - Ribbed metal for increased stability and robustness.
• External Swivel Housing - Quickly access swivel seal for faster repairs.
• Ball Bearing Swivel - Swivel designed with internal ball bearings reduces friction and ensures smooth operation.
• Large Hose Capacity with Small Profile - Compact design accommodates up to a 50 foot (15 meter) hose to meet a wide variety of application requirements.

• Model: LDX

• Application: Grease

• Color: Grey

• Dry Weight (lb): 50.6

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Gender: Male
• Inlet Thread Type: NPT

• Maximum Temperature ( degree C): 100
• Maximum Temperature ( degree F): 212

• Maximum Working Pressure (psi): 4060

• Minimum Temperature ( degree C): -40
• Minimum Temperature ( degree F): -40

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 19
• Overall Height (mm): 483
• Overall Length (in): 17.5
• Overall Length (mm): 445
• Overall Width (in): 9.4
• Overall Width (mm): 239

• Recommended Environment: Indoor
• Recommended Fluid Type: Grease

GG HEL010

LDX SERIES REEL, HOSE, 3/8in X 50', A/W

Graco HEL010 LDX Series, Air/Water/Antifreeze/WWS, 3/8 in (10 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT

Graco's industrial-grade LDX hose reel offers incredible value for cost-conscious workshops. Its all-metal frame and specially crafted, long-lasting components provide consistent release and retraction.

• Dual Pedestal Frame - Ribbed metal for increased stability and robustness.
• External Swivel Housing - Quickly access swivel seal for faster repairs.
• Ball Bearing Swivel - Swivel designed with internal ball bearings reduces friction and ensures smooth operation.
• Large Hose Capacity with Small Profile - Compact design accommodates up to a 50 foot (15 meter) hose to meet a wide variety of application requirements.

• Model: LDX

• Application: Air, Water, Antifreeze, WWS

• Color: Grey

• Dry Weight (lb): 40.7

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Gender: Male
• Inlet Thread Type: NPT

• Maximum Temperature ( degree C): 65
• Maximum Temperature ( degree F): 149

• Maximum Working Pressure (psi): 300

• Minimum Temperature ( degree C): -26
• Minimum Temperature ( degree F): -14.8

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 19
• Overall Height (mm): 483
• Overall Length (in): 17.5
• Overall Length (mm): 445
• Overall Width (in): 9.4
• Overall Width (mm): 239

• Recommended Environment: Indoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG HSDDDB

XD SERIES 30 REEL, HOSE, BARE, DEF, BLUE

Graco HSDDDB XD30, DEF, 3/4 in. (19 mm) Inlet, Bare Reel (3/4 in. X 50 ft. (19 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue

Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-50 foot (9.1-15 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

• Model: XD
• Series: 30

• Application: Diesel Fuel

• Bare Reel: 1

• Color: Metallic Blue

• Frame Type: Enclosed

• Hose Inside Diameter (in): 3/4
• Hose Inside Diameter (mm): 19.05
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Bare Reel
• Includes Hose: No
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: BSPP

• Maximum Working Pressure (psi): 50

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05

• Overall Height (in): 23.10
• Overall Height (mm): 588
• Overall Length (in): 22.12
• Overall Length (mm): 561.73
• Overall Width (in): 9.0
• Overall Width (mm): 229

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: DEF

GG HV-2000

ADVANJET VALVE, HV-2000

Graco HV-2000 Advanjet HV-2000 Jet Valve

The Advanjet HV-2000 jet valve provides non-contact jet dispensing for the successful application of fluids in the electronic, semiconductor, industrial and life science markets. A single, easily replaceable diaphragm eliminates dynamic fluid seals common in all other jets. No need to disassemble, clean and replace worn seals, saving time and money. The diaphragm allows fast cycle rates because of its very small mass. There is no large sliding valve stem slowing down the process. With this novel diaphragm design, the energy needed to eject a drop can be adjusted providing wider process windows.

• Easy to Clean
  Only two parts contact the fluid making it easy to exchange and replace parts.
• Easy to Maintain
  Unlike complicated piezo jets, the jet valve can be maintained within your factory with low-cost maintenance kits.
• Easy to Integrate
  The HV-9500 valve is a drop in replacement for existing operations. No external controller box required.
• Features:

  Up to 300 drops/sec

  Outstanding repeatability

  Viscosities up to 400K cps

  Drops as small as 10 nl

  No fluid seals to clean or replace

  Integral heater with minimal fluid heated

  Tungsten carbide internal components for long life

• Model: AdvanJet

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Underfill, Metering

• Component Type: Single Component

• Container Type: Cartridge

• Maximum Working Pressure (bar): 6
• Maximum Working Pressure (kg/cm 2): 6
• Maximum Working Pressure (kPa): 620
• Maximum Working Pressure (MPa): 0.6
• Maximum Working Pressure (psi): 90

• Power Type: Pneumatic

GG J6700014

GG L005S1

LOWER, CHEMICAL, 5, SST, UCUP

Graco L005S1 Z-Pump, 5 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 0.08

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 5

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L010S4

LOWER, CHEMICAL, 010, SST, UCUP

Graco L010S4 Z-Pump, 10 cc, Severe Duty, S4

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S4

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1/2
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 0.16

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 10

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L015S1

LOWER, CHEMICAL, 15, SST, UCUP

Graco L015S1 Z-Pump, 15 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 0.24

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 15

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L060SM

LOWER, SM060 MAXLIFE SST

Graco L060SM Stainless Steel MaxLife Check-Mate 60 Lower

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT

• For Use With: Check-Mate Pump Packages

• Maximum Flow Rate (GPM): 0.9

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 60

• Maximum Pump Speed (CPM): 60

• Maximum Working Pressure (psi): 6100

GG L086S1

LOWER, CHEMICAL, 86, SST, UCUP

Graco L086S1 Z-Pump, 86 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 1.36

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 86

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L100S4

LOWER, CHEMICAL, 100, SST, UCUP

Graco L100S4 Z-Pump, 100 cc, Severe Duty, S4

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S4

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1/2
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 1.59

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 100

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L100SM

GG L100SS

LOWER, SS100, SEVERE DUTY, SST

Graco L100SS Stainless Steel Severe Duty Check-Mate 100 Lower

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT

• For Use With: Check-Mate Pump Packages

• Maximum Flow Rate (GPM): 1.6

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 100

• Maximum Pump Speed (CPM): 60

• Maximum Working Pressure (psi): 6300

GG L160S1

LOWER, CHEMICAL, 160, SST, UCUP

Graco L160S1 Z-Pump, 160 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 2.54

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 160

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L200CM

LOWER, CM200 MAXLIFE

Graco L200CM Carbon Steel MaxLife Check-Mate 200 Lower

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• For Use With: Check-Mate Pump Packages

• Maximum Flow Rate (GPM): 3.2

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 200

• Maximum Pump Speed (CPM): 60

• Maximum Working Pressure (psi): 6200

GG L200SM

GG L290C1