Search
Parts
Muffler
DC 14-2110
DC 14-2110
MufflerUse Exhaust Muffler 14-1117 on 21 Series side exhaust motors and 14-2110 on 22 series side exhaust motors.
- Use with 22 Series Side Exhaust Mufflers
$109.00
Router Nose Housing
DC 14-2176
DC 14-2176
HSG ROUTER NOSEFor use with Dotco 12-10, 12-20 and 12-25 series
- For use with Dotco 12-10, 12-20 and 12-25 series
$121.00
Router Guide
DC 14-2400
DC 14-2400
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2401
DC 14-2401
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Router Guide
DC 14-2531
DC 14-2531
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to Minimum Order Quantities
$120.00
Router Guides
DC 14-2703
DC 14-2703
GUIDE ROUTER- For use on Dotco 12-10, 12-20, 12-20, 12-25 and 12-40 series.
- The minimum router bit length (OAL) to be used is determined by the formula: OAL = 1-13/16 (series 12-10) OAL = 2 (series 12-20 & 12-25).
- Important: Insert bit into collet as far as possible, then pull out 1/16 and tighten collet.
- In an emergency, if it is necessary to pull out the bit more than 1/4, be sure to insert a short length of blank shank (not to exceed 5/8 long) in the bottom of the collet before inserting the bit.
- May be subject to minimum order quantities
$120.00
Payment options
