Parts

ATP 93-13

ATP C-066977

ATP C-068659

ATP C-087505

ATP C088079

ATP C112186

ATP ZND5003-11

ATP ZND5003-23

ATP ZND5003-25

ATP ZND5004-26

AWC 4.ZHE-8131

AWC CABLE/4/T/10-FT-W/CO5FHIR

AWC COT-10CG

AWC FOP-30/S/45

AWC ST-10CG

AWC ST-15SLGS

AWC USB-SERIAL-4PIN

AX 10005S

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.010 lb

• Drive: 3/4" Square

• Set: No

AX 1012812

AX 15MM55

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.349 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 22.2 mm

• Hex Opening: 15 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 82.5 mm
• Set: No

AX 440-30IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.013 lb

• Drive: Hex Insert
• Drive Size: 30IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .216 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

AX 492-27X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.026 lb

• Drive: Hex Power Drive
• Fastener Type: Phillips

• Overall Length: 1.93 in, 49.0 mm
• Point Size: 2
• Set: No

AX 49-B-20IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.028 lb

• Drive: Hex Power Drive
• Drive Size: 20IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .151 in

• Overall Length: 3.5 in, 89.0 mm
• Set: No
• SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

AX 49-B-25IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.130 lb

• Drive: Hex Power Drive
• Drive Size: 25IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .173 in

• Overall Length: 3.5 in, 89.0 mm
• Set: No
• SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

AX 49-B-8IPX