Parts

AWC OPTV-20

AWC RT-50-B-5C1

AWC ST-10CG

AWC SW-KEM-JV

AWC USB-RS485-TRI

AWC USB-SERIAL-4PIN

AWC Z787-PEPPERL+FUCHS

AX 10005S

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.010 lb

• Drive: 3/4" Square

• Set: No

AX 1012812

AX 15MM55

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.349 lb
• Diameter Drive End (C): 23.8 mm
• Diameter Nose End (B): 22.2 mm

• Hex Opening: 15 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 11.1 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 82.5 mm
• Set: No

AX 440-30IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.013 lb

• Drive: Hex Insert
• Drive Size: 30IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .216 in

• Overall Length: 1.0 in, 25.0 mm
• Set: No
• SKU Group Note: Torx and Torxalign are registered trademarks of Acument Intellectual Properties, LLC. Torx Plus Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details.

AX 492-27X

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.026 lb

• Drive: Hex Power Drive
• Fastener Type: Phillips

• Overall Length: 1.93 in, 49.0 mm
• Point Size: 2
• Set: No

AX 49-B-20IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.028 lb

• Drive: Hex Power Drive
• Drive Size: 20IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .151 in

• Overall Length: 3.5 in, 89.0 mm
• Set: No
• SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

AX 49-B-25IPX

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks
• Torx Plus is a registered trademark of Acument Intellectual Properties, LLC.

• Weight: 0.130 lb

• Drive: Hex Power Drive
• Drive Size: 25IP
• Fastener Type: Torx Plus

• Measurement Across Lobes: .173 in

• Overall Length: 3.5 in, 89.0 mm
• Set: No
• SKU Group Note: Pozidriv is a registered trademark of the Phillips Screw Company.

AX 49-B-8IPX

AX 7MM21

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.062 lb
• Diameter Drive End (C): 12.7 mm
• Diameter Nose End (B): 11.1 mm

• Hex Opening: 7 mm
• Magnetism: Non-Magnetic

• Opening Depth (D) (in): 4.8 mm
• Opening Modifier: 6 Point Hex

• Overall Length A: 44.4 mm
• Set: No

AX EX-758-4

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

• Weight: 0.480 lb
• Description: male hex to male sq

• Hex Drive: 5/8 in

• Magnetism: Non-Magnetic

• Overall Length: 4.0 in, 102.0 mm
• Set: No

AX M-1106

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Parts have a harder heat treat MX-1108-E has no lead-in chamfer

• Weight: 0.027 lb
• Diameter Drive End (C): 1/2 in
• Diameter Nose End (B): 5/16 in

• Hex Opening: 3/16 in
• Magnetism: Magnetic

• Opening Depth (D) (in): 3/32 in
• Opening Modifier: 6 Point Hex

• Overall Length A: 7/8 in
• Set: No

AX MDB-10

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Made in the USA - Quality and Availability
• Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
• Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
• Power Bits Are Best Used With Quick-Release (QR series) Chucks

• Weight: 0.068 lb
• Description: Magnetic

• In Column Note 2: 5/16" Shank Diameter
• Magnetism: Magnetic

• Overall Length: 2.56 in
• Set: No
• Size: 5/16 in

AX TX-5410

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.113
• Made in the USA - Quality and Availability
• High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
• Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
• Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer

• Weight: 0.115 lb
• Diameter Drive End (C): 7/8 in, 22 mm
• Diameter Nose End (B): 1/2 in, 13 mm

• Driver Size: E-10

• Magnetism: Non-Magnetic

• Opening Modifier: Torx

• Overall Length A: 1-1/2 in, 38 mm
• Set: No

AX UG-3216

AX UG-EX-377-8

AX UG-EX-508-3

BA 040.5-D

BA 092-DX