Parts

GG 555808

GG 556032

ELEMENT, FILTER, 20 MICRON

Graco 556032 Replacement Element for Cartridge Oil Filter - 20 Micron, Lubriquip part number 183-100-106

• Pressure Filter - Replacement Elements - 20 micron

• For Use With: Meter-Flo Pump Packages, Cartridge Oil Filters

GG 556638

FITTING, ELBOW-MALE 3/16T X 1/8 NPT

Graco 556638 Fitting - Brass Male Tube Elbows 3/16 in. (4.8 mm) Tube x 1/8 in. (3.2 mm) NPTF

• Brass Male Tube Elbow
• 3/16 inch (4.8 mm) tube x 1/8 inch (3.2 mm) NPTF
• Lubriquip part number 435-440-030

• Application: On-Road Vehicles

• Compatible Material: Oil, Grease

• Connection Type: Tube End, Threaded

• For Use With: Tube

• Material: Brass

GG 557334

GASKET, RESERVOIR

Graco 557334 Lower Reservoir Gasket

• Lower Tube Seal
• Lubriquip part number 501-423-001

• Material: Durometer Buna-N

• Outside Diameter (cm): 15
• Outside Diameter (in): 6
• Outside Diameter (mm): 152

GG 557514

GG 557807

FILTER, 25 MICRON, 9-5/8" LG

Graco 557807 Replacement Filter Cartridge, 25-micron Ex-Lng, Lubriquip part 540-275-001, replaces part 540-275-000 and Trabon part 40275, Genuine Trabon replacement filter element for Lubriquip filter assemblies 183-000-080, 183-000-081, 183-000-120, 183-000-121, 183-000-210, 183-000-211

• 25 micron Replacement Filter Element
• 2-5/8 in (67 mm) OD x 9-5/8 in (92 mm) Extra Long Element

• For Use With: Cartridge Oil Filters

GG 557829

SWITCH, PRESS ADJ, 1000-4700 PSI

Graco 557829 Moisture-Resistant Single Control Pressure Switch, 4700 psi (324 bar)

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

• Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly
• LED lights visually display pressure switch functions
• Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers, 124595 4-pin M12 micro-connector sold separately
• Sends an alarm signal to alert either a high or low pressure condition
• Available for hydraulic pressures from 400 to 4700 psi (28 to 324 bar)
• 1/4 in NPT thread allows quick connection to injector systems
• Lubriquip part number 542-210-120

• Model: Trabon
• Adjustable: Adjustable

• Application: On-Road Vehicles, Off-Road Equipment

• Inlet Size (cm): 0.635
• Inlet Size (in): 0.25
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Maximum Operating Pressure (psi): 4700

• Power Connection Type: NEMA-4

GG 558021

CABLE, CONN 6'

Graco 558021 Mini-Straight Connection Cable - 6 ft, 3-Pin

• 3-pin cable, straight connector, 6 feet (1.83 m)
• Lubriquip part number 570-999-080

• Amperage (A): 13

• For Use With: MSP Divider Valves, Proximity Switches, Air Oil Lubrication System

• IP Rating: IP68 NEMA 6P
• Jacket Material: PVC

GG 558188

GG 558190

GG 560919

BLOCK, INLET, MSP/MHH NPSF

Graco 560919 Manzel MHH Divider Valve - Inlet - 1/4-18 NPSF

• Standard Inlet
• 1/4-18 NPSF (NPT)
• Lubriquip part number 527-001-800

• Model: Manzel
• Series: MHH

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPSF

GG 562521

MX VALVE, ASSY 125S IND RH

Graco 562521 Trabon MX Divider Valve with Right Hand Cycle Pin Indicator - MX-125S - 0.250 in cu (4.10 cm cu )

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

• Lubricates large bearings
• Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
• Durable design withstands harsh environments and operating conditions
• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 004-125-601

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: Cycle Indicator

• Discharge Per Piston Stroke (in cu ): 0.250

• Divider Valve Series: MX

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 60

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

• Outlet Size (cm): 0.635
• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562713

MSP VALVE, ASSY MSP 15S

Graco 562713 Trabon MSP Modular Divider Valve - MSP-15S - 0.030 in cu (0.49 cm cu )

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

• Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
• Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 106-100-035

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.030

• Divider Valve Series: MSP

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 14

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

GG 562722

MSP VALVE, ASSY MSP 15T

Graco 562722 Trabon MSP Modular Divider Valve - MSP-15T - 0.015 in cu (0.26 cm cu )

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

• Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
• Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 106-100-195

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.015

• Divider Valve Series: MSP

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 14

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

GG 562727

MSP VALVE, ASSY MSP 40T

Graco 562727 Trabon MSP Modular Divider Valve - MSP-40T - 0.040 in cu (0.66 cm cu )

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

• Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
• Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 106-100-245

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.040

• Divider Valve Series: MSP

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 14

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

GG 562884

RESERVOIR, 12LB PLSTC GRS GPS

Graco 562884 12 lb. (5.42 kg) Plastic Cylindrical Grease Reservoir

• 12 lb (5.42 kg) Plastic Cylindrical Reservoir
• Lubriquip part number 185-100-000

• Model: Trabon

• Application: In-Plant Machinery

• Compatible Material: Grease

• Material: Plastic

GG 563198

VALVE, CHECK 1/8 250 PSI

Graco 563198 Single Ball Check Valve - 250 psi Nominal Cracking Pressure, 1/8 in NPTF (M) x 1/8 in NPSF (F), Steel, 5,000 psi

• Single Ball Check Valve
• 250 psi nominal cracking pressure
• 1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)
• 5,000 psi max
• Lubriquip part number 509-350-250
• Trabon part number 9350-250

• Application: Compressor Equipment

• Ball Material: Steel

• Body Material: Steel

• Compatible Material: Oil, Grease

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPTF

• Maximum Cracking Pressure (bar): 17.2
• Maximum Cracking Pressure (kPa): 1720
• Maximum Cracking Pressure (MPa): 1.72
• Maximum Cracking Pressure (psi): 250

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

• Number of Balls: Single Ball

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPSF

GG 563326

SWITCH, SW BLOWOUT HI PRESS P3

Graco 563326 High Pressure Blowout Switch for 5.68 liter (12 pt.) and 9.46 liter (20 pt.) or 5.44 kg (12 lb.) and 9.06 kg (20 lb.) Reservoirs

• High Pressure Blowout Switch for 5.68 litre (12 pt.) and 9.46 litre (20 pt.) or 5.44 kg (12 lb.) and 9.06 kg (20 lb.) Reservoirs
• Lubriquip part number 521-001-200

• Model: Modu-Flo

• Compatible Material: Oil, Grease

• For Use With: Modu-Flo 12 and 20 pt (5.7 and 9.5 L) or 12 and 20 lb (5.4 and 9.1 kg) cylindrical reservoirs

• Maximum Working Pressure (bar): 100
• Maximum Working Pressure (kPa): 10000
• Maximum Working Pressure (MPa): 10
• Maximum Working Pressure (psi): 1450

GG 563332

VALVE, SOL ASSY 24VDC

Graco 563332 Trabon Accessories - 3-way pneumatic solenoid valve, 24 VDC

• 3-Way, 24 VDC Solenoid Valve
• Lubriquip part number 521-002-100

• Compatible Material: Oil, Grease

• Maximum NLGI Grade: #2

GG 563380

BODY, PUMP ASSY

Graco 563380 Lube Master Pump Body

• Bare Pump
• Lubriquip part number 521-700-000

• Model: Lube Master

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 340
• Maximum Working Pressure (kPa): 34000
• Maximum Working Pressure (MPa): 34
• Maximum Working Pressure (psi): 5000

GG 563424

BLOCK, END, MSP/MHH

Graco 563424 Trabon MSP/Manzel MHH Divider Valve Standard End Section

• Standard end section (Must be ordered in multiples of five)
• Must be ordered in multiples of 5
• Lubriquip part number 527-000-851

• Model: Manzel
• Series: MHH

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Outlet Thread Type: NPSF

GG 563425

BLOCK, BASE, MSP/MHH, NPSF

Graco 563425 Trabon MSP Divider Valve - Intermediate Base Plate - NPSF

• Intermediate base plate
• NPSF
• Lubriquip part number 527-000-871

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPSF

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPSF

GG 563507

FILTER, 138 MICRON INLINE 1/4 NPT

Graco 563507 In-Line Oil and Grease Strainers - High Pressure, 7500 psi, 1/4-18 NPTF, 149 Micron

• 149 micron, 100 Mesh In-Line Block Strainer (NPT)
• Lubriquip part number 527-100-380

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 5170
• Maximum Working Pressure (psi): 7500

• Port Size (cm): 0.635
• Port Size (in): 1/4
• Port Size (mm): 6.35

GG 563509

FILTER, 10 MICRON PLUG END

Graco 563509 End Plug Filter Assembly with 10 micron Filter Element, Lubriquip part number 527-100-540

• 10 micron Replacement Filter Element for Graco part numbers 563511, 563513, 563516
• Replacement filter element for Lubriquip part numbers 527-100-230, 527-100-580, 527-100-581, 527-100-780, 527-101-120, 527-101-223

• For Use With: In-Line Oil Filters

GG 605837