Search
Parts
FF FLAT TIP, SPRAY TC
GG 163626
GG 163626
FF FLAT TIP, SPRAY TC
Graco 163626 Fine Finish Flat Tip, 626
The 626 Fine Finish Flat Tip produces a 12 to 14 inch fan pattern and a 0.026 inch orifice.
- Model: Fine Finish
- Series: Flat Tip
- Compatible Material: Lacquer, Varnish, Urethane, Fine Finish Material
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 35.6
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.73
- Maximum Flow Rate (L/min): 2.76
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (psi): 3000
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.026
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$66.00
Filter Assembly, Fluid, High Pressure, 60 Mesh
GG 223160
GG 223160
FILTER, FLUID
Graco 223160 Stainless Steel High Pressure Fluid Filter, filter assembly, 60 mesh
All stainless steel construction with PTFE o-ring and polyethylene screen support. Resists corrosion from waterborne materials, catalyzed varnishes and other fluids not compatible with carbon steel or aluminum. Polyethylene support prevents screen collapse for maximum performance.
Application: Corrosion resistant fluid filters for catalyst and waterborne materials.
$1,330.00
Kit, Barrel, Es Gun, Aa, 85Kv
GG 24N745
GG 24N745
KIT, BARREL, ES GUN, AA, 85KV
Graco 24N745 85 kV Electrostatic Air-Assisted Gun Body Assembly Kit
$1,370.00
Kit, Lp Non-Circ Valve
GG 24T441
GG 24T441
KIT, LP NON-CIRC VALVE
Graco 24T441 Low Pressure Non-Circulating Valve, 100 psi max air working pressure, 300 psi max fluid working pressure, Series A
$1,380.00
Kit, Seal, 70Cc
GG 24T841
GG 24T841
KIT, SEAL, 70CC
Graco 24T841 70 cc Lower Pump Seal Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps
$817.00
Complete Fluid Repair Kit, 1050M Ind Ss, Pt, Pt, Pt
GG 25A856
GG 25A856
Kit,1050M Ind Ss,Pt,Pt,Pt
$795.00
Tip
GG AAM415
GG AAM415
TIP, AAM415
Graco AAM415 Fine Finish Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
Payment options
