Parts

GG 261862

GG 261876

GG 261903

GG 262025

GG 262614

REACTOR A-25 PROPORTIONER, WHEELS, CYCLE COUNT

Graco 262614 Reactor A-25 Proportioner with Wheels, DataTrak

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when youre spraying at maximum flow rates - resulting in better quality foam.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy-to-service fluid section reduces maintenance and increases productivity
• DataTrak Control

  Resettable counter tracks material usage

• Three Heat Zones

  Three independent heat zones - ISO, resin and hose heat

  Provide accurate heat control for reliable spraying to handle different chemical viscosities

  Digital temperature controls

  • Recirculation Manifold

    A quick, easy way to balance system pressures

  • NXT Air Motor

    Low air consumption for increased efficiency

    Muffler provides low operating noise levels

    Air valve provides smooth and rapid changeover

    • Quick Knockdown Lower Pumps

      For easy disassembly and maintenance

    • ISO Pump Lube System

      Prevents isocyanate crystallization on the pump seal and shaft

    • ISO Pump Lube System

      Prevents isocyanate crystallization on the pump seal and shaft

    
    

    • Model: Reactor
    • Series: A-25
    • Air Inlet Size (cm): 1.27
    • Air Inlet Size (in): 1/2
    • Air Inlet Size (mm): 12.7
    • Air Inlet Thread Gender: Female
    • Air Inlet Thread Type: NPT
    • Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
    • Application: Spray Foam
    • Applicator Type: Manual
    • Compatible Material: Plural Components
    • Component A Inlet Size (in): 3/4
    • Component A Inlet Size (mm): 19.05
    • Component A Thread Gender: Female
    • Component A Thread Type: NPT
    • Component B Inlet Size (in): 3/4
    • Component B Inlet Size (mm): 19.05
    • Component B Thread Gender: Female
    • Component B Thread Type: NPT
    • Component Type: Two Component
    • Flush Type: Solvent
    • Frequency (Hz): 50/60
    • Gun Type: No Gun
    • Includes: Proportioner, Heated Hose, Wheels, DataTrak
    • Material Application: Polyurethane Foam
    • Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
    • Maximum Air Inlet Pressure (bar): 8.62
    • Maximum Air Inlet Pressure (kPa): 862
    • Maximum Air Inlet Pressure (MPa): 0.86
    • Maximum Air Inlet Pressure (psi): 125
    • Maximum Flow Rate (kg/min): 11.34
    • Maximum Flow Rate (lb/min): 25
    • Maximum Fluid Temperature ( degree C): 88
    • Maximum Fluid Temperature ( degree F): 190
    • Maximum Fluid Viscosity (cP): 1500
    • Maximum Fluid Temperature ( degree C): 88
    • Maximum Fluid Temperature ( degree F): 190
    • Maximum Fluid Viscosity (cP): 1500
    • Maximum Hose Length (ft): 210
    • Maximum Hose Length (m): 64
    • Maximum Mix Ratio: 1:1
    • Maximum Working Pressure (bar): 138
    • Maximum Working

GG 269635

CONTRACTOR FLAT TIP, SPRAY 635

Graco 269635 Contractor Flat Tip, 635

The 635 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.035 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.31
• Maximum Flow Rate (L/min): 4.96

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.035

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 26A056

GG 26A133

GG 26A391

GG 26A398

GG 26A861

GG 26B180

GG 26C355

SD SERIES SDP8 VALVE, FC, 1/2NPT, FLEX, AF

Graco 26C355 SDP8 Series Electronic Preset Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet

Graco's premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

• Upgradeable - SD Preset meters are compatible with PULSE FC fluid control system
• Large, Intuitive Display - high-contrast display for low and bright light conditions
• Long valve life - cartridge spool valve specifically designed to reduce wear and reduce costly down time
• Reliable - time-tested Graco engineering
• Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
• Long battery life - uses 4 AA easy-to-replace batteries

• Model: SDP8

• Compatible Material: Antifreeze, Oil, ATF

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Flexible Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Recorded Dispense: 9999

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 103.4
• Maximum Working Pressure (kPa): 10340
• Maximum Working Pressure (MPa): 10.3
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 2.4
• Metering Gun Weight (lb): 5.3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.9

• Minimum Operating Temperature ( degree C): -16
• Minimum Operating Temperature ( degree F): 4

• Nozzle Type: Oil Automatic Quick-Close

• Outlet Thread Type: Straight Thread O-Ring Boss

• Overall Height (cm): 14.6
• Overall Height (in): 5.75
• Overall Height (mm): 146
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9.5
• Overall Width (in): 3.75
• Overall Width (mm): 95

• Product Type: Meter

• Recommended Environment: Indoor

GG 26C361

SD SERIES SDP18 VALVE, FC, 3/4NPT, FLEX, OIL

Graco 26C361 SDP18 Series Electronic Preset Oil/Antifreeze Meter - Flexible Extension - 3/4 in. Inlet

Graco's premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

• Upgradeable - SD Preset meters are compatible with PULSE FC fluid control system
• Large, Intuitive Display - high-contrast display for low and bright light conditions
• Long valve life - cartridge spool valve specifically designed to reduce wear and reduce costly down time
• Reliable - time-tested Graco engineering
• Durable - Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
• Long battery life - uses 4 AA easy-to-replace batteries

• Model: SDP18

• Compatible Material: Oil, Antifreeze, ATF, Gear Oil

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Flexible Extension
• Inlet Size (cm): 1.91
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 18
• Maximum Flow Rate (L/min): 68

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Recorded Dispense: 9999

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 103.4
• Maximum Working Pressure (kPa): 10340
• Maximum Working Pressure (MPa): 10.3
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 2.4
• Metering Gun Weight (lb): 5.3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.9

• Minimum Operating Temperature ( degree C): -16
• Minimum Operating Temperature ( degree F): 4

• Nozzle Type: Manual

• Outlet Thread Type: Straight Thread O-Ring Boss

• Overall Height (cm): 14.6
• Overall Height (in): 5.75
• Overall Height (mm): 146
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9.5
• Overall Width (in): 3.75
• Overall Width (mm): 95

• Product Type: Meter

• Recommended Environment: Indoor

GG 26C712

GG 27420-2-160

GG 27421

GG 276767

GG 278204

GG 286319

RAC 5 TIP, SPRAY

Graco 286319 RAC 5 SwitchTip, 319

The Reverse-A-Clean (RAC) 319 RAC 5 SwitchTip is designed for narrow surfaces and thick materials. The 319 SwitchTip has a 0.019 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

  
  

  • Model: RAC 5
  • Series: SwitchTip
  • Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
  • For Use With: RAC 5 HandTite Tip Guard
  • Maximum Fan Width (cm): 20.3
  • Maximum Fan Width (in): 6
  • Maximum Fan Width (mm): 203
  • Maximum Flow Rate (GPM): 0.38
  • Maximum Flow Rate (L/min): 1.44
  • Maximum Working Pressure (bar): 280
  • Maximum Working Pressure (kPa): 28000
  • Maximum Working Pressure (psi): 4050
  • Minimum Fan Width (in): 6
  • Minimum Fan Width (mm): 152
  • Orifice Diameter (in): 0.019

GG 286413

RAC 5 TIP, SPRAY

Graco 286413 RAC 5 SwitchTip, 413

The Reverse-A-Clean (RAC) 413 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

• Model: RAC 5
• Series: SwitchTip

• Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: RAC 5 HandTite Tip Guard

• Maximum Fan Width (cm): 25.4
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.013

GG 286425

RAC 5 TIP, SPRAY

Graco 286425 RAC 5 SwitchTip, 425

The Reverse-A-Clean (RAC) 425 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

• Model: RAC 5
• Series: SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC 5 HandTite Tip Guard

• Maximum Fan Width (cm): 25.4
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.025

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 286455

RAC 5 TIP, SPRAY

Graco 286455 RAC 5 SwitchTip, 455

The Reverse-A-Clean (RAC) 455 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.055 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

• Model: RAC 5
• Series: SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC 5 HandTite Tip Guard

• Maximum Fan Width (cm): 25.4
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 3.25
• Maximum Flow Rate (L/min): 12.30

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.055

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 286511

RAC 5 TIP, SPRAY

Graco 286511 RAC 5 SwitchTip, 511

The Reverse-A-Clean (RAC) 511 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

• Model: RAC 5
• Series: SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC 5 HandTite Tip Guard

• Maximum Fan Width (cm): 30.5
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.12
• Maximum Flow Rate (L/min): 0.45

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.011

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 286529

RAC 5 TIP, SPRAY

Graco 286529 RAC 5 SwitchTip, 529

The Reverse-A-Clean (RAC) 529 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Most Widely Used Reversible Spray Tip on the Market (Black Handle)

  Used for residential and commercial applications

  Includes OneSeal for most common coatings

  Large selection of tip sizes available

  Easy to identify laser stamped tip size

  Solvent seal available when using extremely hot solvents

• Model: RAC 5
• Series: SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC 5 HandTite Tip Guard

• Maximum Fan Width (cm): 30.5
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.41

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.029

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8