Parts

GG 207966

GG 213057

FILTER, LIQUID LP 30

Graco 213057 Low Pressure Red Alert Filter, 6 gpm (22.7 lpm), 30 mesh (590 micron) element, 3/4 npt

Filtering is your best defense against premature pump wear, gun wear, surface defects, reworks and tip plugging. The unique red pop-up indicator reveals when fluid filter element requires replacement. Built-in bypass valving directs continuous flow through separate passage when filter clogs, preventing downtime.

• Red Alert indicator signals filter element replacement to ensure efficient filtration
• Bottom port for installing quick flush ball valve

• Filter Area (in sqrd): 36

• Inlet Size (cm): 1.905
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPT

• Material: Aluminum

• Maximum Flow Rate (GPM): 6
• Maximum Flow Rate (L/min): 22.7

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (MPa): 2.1
• Maximum Working Pressure (psi): 300

• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: NPT

• Overall Depth (cm): 9.5
• Overall Depth (in): 3.75
• Overall Depth (mm): 95

• Overall Height (cm): 22
• Overall Height (in): 8.75
• Overall Height (mm): 220
• Overall Width (cm): 10
• Overall Width (in): 4
• Overall Width (mm): 100

GG 214036

KIT, MOTOR AIR

Graco 214036 Piston Assembly for Monark Air Motor (Includes screw, clip, and piston)

GG 214660

GG 215224

GG 215946

GG 218560

NEEDLE, FLUID

Graco 218560 Fluid Needle for Color Change Valve

GG 222515

GG 222764

GG 222972

GG 223565

GG 223591

GG 224707

GG 224852

GG 231419

GG 233057

KIT, ACCY, DRUM PKG

Graco 233057 Husky 716 55 gal (208 liter) SS Transfer Pump Package with SS Seats, PTFE Balls, PTFE Diaphragms & SS Tube

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

• Center- and end-porting
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks

• Model: Husky
• Series: 716

• Application: Industrial

• Ball Material: PTFE

• Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Cutting Oil, Water - Wastewater Treatment, Water, Ink

• Diaphragm Material: PTFE

• Fluid Inlet Size (cm): 1.9050
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Includes: Bung Base, Stainless Steel Tube
• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Gender: Female
• Inlet Thread Type: NPT

• Manifold Configuration: Split Port
• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 70
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 14

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 70
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 70
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree F): 225

• Maximum Solid Size (cm): 0.2388
• Maximum Solid Size (in): 0.094
• Maximum Solid Size (mm): 2.3876

• Motor Type: Pneumatic

• Number of Pieces: 2

GG 234771

GG 234834

GG 235004

KIT, STRAINER

Graco 235004 Inlet Strainer, Nylon Cap, 3/4 in

Using an Inlet Strainer is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time.

• Model: Graco

• For Use With: ST, STX, 295 ST, 395/495 ST Pro Stand, 455/495 ST Lo-Boy, Ultra Max 695/795 Lo-Boy, GM3000 Lo-Boy, 390/395/450/455/490/495 ST Stand, Ultra 600 Lo-Boy

• Inlet Size (cm): 1.905
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: UNF

GG 235345

MOTOR, HYDR, VISC II

Graco 235345 Viscount II Hydraulic Motor

GG 235419

GG 235875

GG 236070

GG 236234

STEM, VALVE

GG 236905