Parts
TT150 Transducer. 15-150 Ft Lbs, 1/2 Sq Female
STR 10290
STR 10290
Torque Transducers: TT and STT Series
| Model | : | STT 150 | |
| Torque Range (ft-lb) | : | 15-150 lbf-ft | |
| Torque Range (nm) | : | 20.3-203.4 Nm | |
| Torque Range (kgf-cm) | : | 207.4-2073.8 kg cm | |
| Square | : | 0.5 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets
$2,555.84
Rundwn Fix 339Nm, 1/2 M Sq D
STR 10357
STR 10357
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 204Nm 1/2 M SQ DR | |
| Capacity (Nm) | : | 204 Nm | |
| Hexagon Size | : | 1/2 in |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$421.00
DTC-150
STR 10683
STR 10683
Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb
| Product Group | : | DTC Digital Torque and Angle Wrench, ft-lb | |
| Model | : | DTC-150 | |
| Capacity (Nm) | : | 203 Nm | |
| Capacity (in-lb) | : | ||
| Torque Range (ft.lb) | : | 30-150 ft.lbf | |
| Overall Length | : | 22.13 in | |
| Head Type | : | Dovetail Pin/Spring |
Product Description
- Limiting torque value to wrench capacity
- Black and white display and colored light bands on the side of the wrench
- Bands change yellow to green when the target values are achieved
- Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
- Results log large enough for even the busiest assemblies
- Holds 1000 torque results and results can be downloaded
- Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
- Can be used to set parameters in the wrench
- Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
- DTC CONNECT is freeware and is included in the DTC
$1,271.96
LTCE 4, Extension
STR 819424
STR 819424
Straight Extension Interchangeable Heads for Torque Wrenches
| Model | : | LTCE 4 | |
| Square | : | 300 lbf in | |
| Head Type | : | LTCE 4 |
| A | : | 4 in | |
| B | : | 1.125 in | |
| C | : | 0.375 in | |
| D | : | 1.125 in |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$443.56
DC POWER High/Low, 40 volts
SUM SP-B40HL801T/C6
SUM SP-B40HL801T/C6
DC POWER High/Low, 40 volts
$630.00
