Parts
O-RING, -018 VITON-A 75 DURO
GG 555684
GG 555684
O-RING, -018 VITON-A 75 DURO
Graco 555684 Cylinder O-Ring, Viton
Application: For use with Manzel® Model HP-15 High Pressure Lubricators.
- For Use With: Manzel HP-15, Fluid Automation F4 Series, LSR Select
- Inside Diameter (cm): 1.9
- Inside Diameter (in): 0.739
- Inside Diameter (mm): 18.8
- Material: Viton
- Number of Pieces: 1
- Outside Diameter (cm): 2.2
- Outside Diameter (in): 0.879
- Outside Diameter (mm): 22.3
$3.50
GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC
GG 557931
GG 557931
GREASE JOCKEY ELECTRIC VALVE, ASSY, SOLENOID, 3 WAY, 24 VDC
Graco 557931 3-Way Solenoid Valve Kit - 24 VDC
Application: For use with Grease Jockey On-Road Mobile Lubrication Systems.
- 24 VDC replacement solenoid
- Lubriquip part number 550-250-265
- Application: On-Road Vehicles, Off-Road Equipment
- Compatible Material: Air
- Material: Brass
- Maximum Voltage (V dc): 24
- Port Size (cm): 0.1191
- Port Size (in): 0.046875
- Port Size (mm): 1.1913
- Power Rating (W): 7
$168.50
O-RING, -908 VITON
GG 558730
GG 558730
O-RING, -908 VITON
Graco 558730 O-Ring, Viton
Application: For use with Saniforce and Husky Electric Diaphragm Pumps.
- Lubriquip part number GOV-060-020
- For Use With: Husky 1050e Pump, SaniForce 1040e Pump
- Inside Diameter (cm): 1.6
- Inside Diameter (in): 0.644
- Inside Diameter (mm): 16.4
- Material: Viton
- Number of Pieces: 1
- Outside Diameter (cm): 2.1
- Outside Diameter (in): 0.818
- Outside Diameter (mm): 20.8
$3.65
VALVE, CHECK, 1/4 NPT, 35
GG 563207
GG 563207
VALVE, CHECK, 1/4 NPT, 35
Single Ball Check Valve - 35 psi Nominal Cracking Pressure, 1/4 in NPTF (M) x 1/4 in NPSF (F), Steel, 5,000 psiDouble Ball Check Valve
35 psi nominal cracking pressure
1/4 inch (6.4 mm) NPTF (M) x 1/4 inch (6.4 mm) NPSF (F)
steel body/ball
5,000 psi max
Lubriquip part number 509-360-030 Trabon part number 9360-35
$33.20
Tip
GG AAM409
GG AAM409
TIP, AAM409
Graco AAM409 Fine Finish Spray Tip for G15 and G40 Guns, 0.009 inch (0.229 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$159.50
Tip, Pre- Orifice, Es
GG AEF712
GG AEF712
TIP,PRE-ORIFICE,ES
Graco AEF712 AEF Fine Finish Pre-Orifice Spray Tips, 0.012 inch (0.305 mm) Orifice Size, 14-16 inches (350-400 mm) Fan Width
$232.50