Parts

GG 253692

FRAME, ACCY, STAND, PUMP

Graco 253692 Floor Stand for NXT, E-Flo DC and Viscount Motors (750-2000 cc)

GG 255610

Kit, Intake L100 Carbon

GG 255854

Kit, Accessory, Nozzle Rigid

GG 255855

Kit, Accessory, Nozzle Rigid

GG 256415

Kit, Front Cover, Rnd, 5 Pack

GG 256994

VALVE,1 CLR/1 FLUSH LP STACK

Graco 256994 2 Valve, 1 Color Low Pressure Valve Stack

GG 258775

Kit, Inlet, O-Ring, Pkg. of 4

GG 25A105

Kit, Tank, Color, 11L

GG 25A899

REGULATOR,ASSY,STACK,W/GUAGE

Graco 25A899 Material Regulator with Gauge

• Model: LSR

GG 25A914

Kit, Regulator

GG 25A998

MODULE, STACK, LG MXR, VLV, CLR

Straight Thread Single Pass Mixing Stack with A/B Material Valves and Color Injector

Straight Thread Single-Pass Mixing Stack designed for Graco F-5 two-component LSR equipment.

Reduce downtime and increase production with mixing stacks.

Reduce pressure drops

• High-flow material passages on the regulator are 225% larger which reduces pressure drops through the barrel stack.

Easier to clean + assemble- No tapered national pipe thread (NPT) threads and regulator and mixer enhancements for greater clearance. Reduces cleaning time by 50 percent so you can spend more time producing parts.

GG 25C212

Kit, O-rings, Turbine

GG 25D893

Kit, Filter, Screen, Suction, Hyd

GG 25E671

Kit, Air Cap, Hvlp

GG 25M494

Kit, X-Wrap, Sleeve, Whip

GG 25P114

Kit, Gasket, Air Cover

GG 25R579

Kit, PPS V2.0, Adapter

GG 269625

CONTRACTOR FLAT TIP, SPRAY

Contractor Flat Tip, 625The 625 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.025 inch orifice.

GG 269715

CONTRACTOR FLAT TIP, SPRAY 715

Contractor Flat Tip, 715The 715 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.015 inch orifice.

GG 269721

CONTRACTOR FLAT TIP, SPRAY 721

Graco 269721 Contractor Flat Tip, 721

The 721 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.021 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.47
• Maximum Flow Rate (L/min): 1.78

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.021

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 26A070

CONTROL, SYSTEM, PRODISPENSE

ProDispense Control Model Assembly, Base SystemThis cost-effective and user-friendly electronic system dispenses preset amounts of fluids.ProDispense allows durable goods manufacturers to quickly and accurately fill cavities with oil, grease, water, or other industrial fluids in assembly line environments, where accurate dispensing is essential.Control 2 fluid panels with this base system.Deliver up to 8 different fluids at multiple dispense points, and accurately measure volume.

GG 26A119

METER,GEAR, ASSY, G3000A

Graco 26A119 G3000A High Pressure Fluid Meters, 0.02 to 1.0 gpm (75 to 3800 cc/min) flow range

GG 26A169

Kit, Seat, Peek, Dose Valve

GG 26A187

Kit, Color Valve Stack, Acid

GG 26B135

Kit, Bracket, MTG, Pump