Parts
PROMIX 2KE PROPORTIONER, SYSTEM, METER
GG 24F087
GG 24F087
PROMIX 2KE PROPORTIONER, SYSTEM, METER
Graco 24F087 ProMix 2KE Proportioner, air, G3000 meter, 3 color/1 catalyst, USB reporting, for hazardous location
The ProMix 2KE is an entry level, compact, easy to use plural component system allowing you to mix on-demand for all spray technologies.
- Designed for multi-color, two component, in-booth applications
- Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
- Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter
- Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more
- Model: ProMix
- Series: 2KE
- Air Inlet Size (cm): 0.9525
- Air Inlet Size (in): 3/8
- Air Inlet Size (mm): 9.525
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 2
- Applicator Type: Manual Air Spray, Air-Assist
- Component Type: Two Component
- Flush Type: Solvent
- Frequency (Hz): 50/60
- Gun Activation: Manual
- Includes: 2KE Meter-Based Proportioner, G3000 Meter, 3 Color, 1 Catalyst, USB Module
- Material Type: Two Component
- Maximum Air Inlet Pressure (bar): 6.9
- Maximum Air Inlet Pressure (kPa): 690
- Maximum Air Inlet Pressure (psi): 100
- Maximum Flow Rate (cc/min): 3790
- Maximum Flow Rate (GPM): 1
- Maximum Flow Rate (L/min): 3.79
- Maximum Fluid Viscosity (cP): 5000
- Maximum Fluid Viscosity (cP): 5000
- Maximum Mix Ratio: 30:1
- Maximum Number of Colors: Up to 3
- Maximum Operating Temperature (°C): 50
- Maximum Operating Temperature (°F): 122
- Maximum Working Pressure (bar): 206.8
- Maximum Working Pressure (kPa): 20680
- Maximum Working Pressure (MPa): 20.7
- Maximum Working Pressure (psi): 3000
- Measuring Type: Meter
- Minimum Flow Rate (cc/min): 75
- Minimum Flow Rate (GPM): 0.02
- Minimum Flow Rate (L/min): 0.075
- Minimum Fluid Viscosity (cP): 20
- Minimum Mix Ratio: 0.1:1
- Mix Accuracy (%): 1
- Number of Catalysts: 1
- Number of Color Valves: N/A
- Number of Colors: 3
- Number of Resin Colors: 3
- Overall Depth (cm): 37.6
- Overall Depth (in): 14.8
- Overall Depth (mm): 376
- Overall Height (cm): 91.7
- Overall Height (in): 36.1
- Overall Height (mm): 917
- Overall Width (cm): 51.1
- Overall Width (in): 20.1
- Overall Width (mm): 511
- Power Source: Air
- Proportioning Type: Manual Electronic
- Pump Ratio: Meter only
$30,030.00
KIT, AGITATOR, SUB ASSY
GG 25T862
GG 25T862
KIT, AGITATOR, SUB ASSY
Graco 25T862 Radial Piston Air Motor Retrofit Kit for Back-Geared Agitators
By upgrading back-geared agitators with radial piston air motors, factory paint mix rooms can cut compressed air costs by up to 85 percent.
Application: For agitating high viscosity (500 to 3000 cP) material- Installs quickly for immediate cost savings
- Needs no air line lubrication to keep running well
- Operates more quietly than comparable rotary vane agitator air motors
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPT
- For Use With: 55 Gallon (208 Liter) Drum
- Maximum Air Inlet Pressure (bar): 5
- Maximum Air Inlet Pressure (kPa): 500
- Maximum Air Inlet Pressure (psi): 70
- Maximum Speed (RPM): 83
- Maximum Viscosity (cP): 3000
- Maximum Working Pressure (bar): 5
- Maximum Working Pressure (kPa): 500
- Maximum Working Pressure (psi): 70
- Motor Type: Pneumatic - Radial Piston
- Power Rating (HP): 0.16
$3,320.00
RAC 5 TIP, SPRAY
GG 286429
GG 286429
RAC 5 TIP, SPRAY
Graco 286429 RAC 5 SwitchTip, 429
The Reverse-A-Clean (RAC) 429 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 25.4
- Maximum Fan Width (in): 8
- Maximum Fan Width (mm): 254
- Maximum Flow Rate (GPM): 0.9
- Maximum Flow Rate (L/min): 3.41
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 8
- Minimum Fan Width (mm): 203
- Orifice Diameter (in): 0.029
- Pattern Size (in): 8 to 10
- Pattern Size (mm): 203.2 to 254
$62.75
RAC X FFLP TIP, SPRAY, (410)
GG FFLP410
GG FFLP410
RAC X FFLP TIP, SPRAY, (410)
Fine Finish Low Pressure RAC X FF LP SwitchTip, 410 Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 410 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces an 8 to 10 inch Fan pattern and has a 0.010 inch orifice, ideal for finishing materials. Reverse the SwitchTip to easily clear clogs. For fine finish applications Less Prep & Cleanup Time- Less mess with less overspray
- Put the paint where you want it
- Softer spray fan pattern
- Easy to apply any material to any surfance
- Consistent blended finish quality
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Works with any airless sprayer
- Longest lasting Fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$82.00
LineLazer RAC 5 SwitchTip, 217
GG LL5217
GG LL5217
LineLazer RAC 5 SwitchTip, 217
LineLazer RAC 5 SwitchTip, 217 The Reverse-A-Clean (RAC) 217 LineLazer RAC 5 SwitchTip has a 0.017 inch orifice and produces a 2 to 4 inch line. Used for parking lots, roads, warehouse floors, crosswalks and athletic fields. Best used with materials ranging from heavy waterbase to thin alkyd traffic paints. Creates clean, laser-sharp lines with no fuzzy edges or thin spots Designed specifically for parking lots, roads, warehouse floors, crosswalks and athletic fields Sprays heavy water-base to thin alkyd traffic paints Ensures consistent paint thickness, from edge to edge, less overspray and long-lasting lines
$71.00
RAC X LTX TIP, SPRAY, 215
GG LTX215
GG LTX215
RAC X LTX TIP, SPRAY, 215
RAC X SwitchTip, 215 The Reverse-A-Clean (RAC) 215 RAC X SwitchTip is designed for narrower surfaces. The 215 SwitchTip has a 0.015 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, 315
GG LTX315
GG LTX315
RAC X LTX TIP, SPRAY, 315
RAC X SwitchTip, 315 The Reverse-A-Clean (RAC) 315 RAC X SwitchTip is designed for narrow surfaces. The 315 SwitchTip has a 0.015 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, 531
GG LTX531
GG LTX531
RAC X LTX TIP, SPRAY, 531
RAC X SwitchTip, 531 The Reverse-A-Clean (RAC) 531 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, 619
GG LTX619
GG LTX619
RAC X LTX TIP, SPRAY, 619
Graco LTX619 RAC X SwitchTip, 619
The Reverse-A-Clean (RAC) 619 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: LTX SwitchTip
- Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
- For Use With: RAC X HandTite Tip Guard
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.019
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$65.25
Vibrator, Elec, 120V, 5.2L Cable
GV 1008921
GV 1008921
Vibrator, Elec, 120V, 5.2L Cable
Call for pricing
THROTTLE VALVE SEAT
IR 131-303
IR 131-303
Throttle Valve Seat for Ingersoll Rand 231C Impact, 1207MAX Ratchet
Product Application and Uses: For use with Ingersoll Rand 231C Impact Wrench and 1207MAX Ratchet WrenchFor Use With
- 1207MAX-D3
- 1207MAX-D4
- 231C
$15.00
EXHAUST SILENCER
IR 2131QT-311
IR 2131QT-311
Exhaust Silencer for Ingersoll Rand 2131, 2132, 2135, 2350 Series Impact Wrench
$15.00
TRIGGER ASSEMBLY
IR 2141-A93
IR 2141-A93
Trigger Assembly for Ingersoll Rand 2141, 2145 Series Impact Wrench
$15.00
SANDING PAD
IR 311A-825-6
IR 311A-825-6
6" Dual Action Backing Pad, Standard Duty, Vinyl for Ingersoll Rand 311 Series Air Sander
Product Application and Uses: For use with Ingersoll Rand 311A and 311G air sanderArbor/Collet: 5/16"-24 Thread
Max Free Speed (rpm): 10000
Number of Vacuum Holes: 0
Pad Diameter or Size (in): 6
Pad Face: Adhesive
For Use With
- 311A
- 311G
$25.00
MOTOR
IR M004RHR083AR3
IR M004RHR083AR3
Inline Multi-Vane Air Motor, 3/8" Keyed Shaft, 190 RPM, 0.41 HP, 49.7 NM, Non-reversible
Features And Benefits- Safety: Meets ATEX Standards
Air Consumption at Max HP (scfm): 18.5
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Drive Size (in): 3/8
Drive Type: Round Keyed
Exhaust Location: Rear
Finish: Black Oxide and Anodize
Gear Ratio: 83:1
Gear Reduction: Triple
Gear Train: Planetary
Housing Material: Steel
Max Free Speed (rpm): 190
Max Pressure (bar): 6.2
Max Torque (ft-lb): 37
Max Torque (in-lb): 440
Max Torque (nm): 49.7
Motor: Rotary Vane
Motor: In line
Mounting Type: Flanged Mounting
Number of Mounting Holes: 2
Power Source: Air Powered
Product Weight (lb): 2.69
Rated Power (hp): 0.41
Rated Power (kW): 0.31
Reversible: Non-reversible
Speed at Max Power (rpm): 106
Standards/Certifications: ATEX
Starting Torque (ft-lb): 28
Starting Torque (nm): 37.3
Warranty: 1-year
$2,115.60
