Parts
REGULATOR, LOW PRESSURE
GG 830353
GG 830353
REGULATOR, LOW PRESSURE
Graco 830353 Low Pressure Fluid Regulator, 250 Max psi, 3-100 psi Range, 3.0 GPM, SST, Air Type, 3/8 (f) x 1/4 (f)
Fluid pressure regulators control pressure of the downstream fluid, allowing operators to accurately control the pressure to guns, applicators and dispense valves
- Actuation Type: Air
- Includes: Regulator Only
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Type: NPSM
- Maximum Flow Rate (GPM): 3
- Maximum Flow Rate (L/min): 11.36
- Maximum Regulated Pressure (bar): 7.0
- Maximum Regulated Pressure (kPa): 700
- Maximum Regulated Pressure (MPa): 0.7
- Maximum Regulated Pressure (psi): 100
- Maximum Viscosity (cP): 1000
- Maximum Working Pressure (bar): 18
- Maximum Working Pressure (kPa): 1800
- Maximum Working Pressure (MPa): 1.8
- Maximum Working Pressure (psi): 250
- Minimum Regulated Pressure (bar): 0.2
- Minimum Regulated Pressure (kPa): 20
- Minimum Regulated Pressure (MPa): 0.02
- Minimum Regulated Pressure (psi): 3
- Outlet Size (cm): 0.635
- Outlet Size (in): 1/4
- Outlet Size (mm): 6.35
$2,400.00
Posipak, 1/4 Id x 1/2 Od, Std, P/Vit
GG 95/0850/11
GG 95/0850/11
Posipak, 1/4 Id x 1/2 Od, Std, P/Vit
$58.50
Straight Tip Flange Nozzle, 1/16 Orfice
GG C00044
GG C00044
Straight Tip Flange Nozzle, 1/16 Orfice
$229.00
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
GG GG4413
GG GG4413
TIP, SPRAY
Graco GG4413 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solventborne, Waterborne
$217.50
Screen Assy, CYC, EZ02, 600 Micron, New W/GND Conn
GV 1018582
GV 1018582
Screen Assy, CYC, EZ02, 600 Micron, New W/GND Conn
$2,125.00