Parts

GG 557425

DISK, BURST, .375 2050/5500 PSI ORANGE

Replacement Rupture Disk, 3/8 in, 5500 psi, Orange Rupture-to-Atmosphere Indicators for use with MJ, MSP, MHH and MXP Divider Valves.

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Disc - 5,500 psi - .375" - orange

Lubriquip part number 509-280-000 Trabon part number 9280

GG 557503

GASKET, CU .390 X .078

Trabon® MJ Divider Valve - Lower Seal for Cross Port Kit For use with Trabon® MJ Divider Valves.

Lower Seal for Cross port Kit

Lubriquip part number 510-657-000 Trabon part number 10657

GG 557512

Gasket, .718 X .313 X .078

GG 557701

STRAINER, 40 MICRON

Replacement Filter Element, 44 micron/325 mesh; Lubriquip part number 525-766-015 For use with High Pressure In-Line Oil Filters.

Replacement element for filter assembly 563508

GG 557713

Gauge, 3000Psi/210Bar, Liq, Sm, 1/4

GG 557717

Gasket, Plug Encl, Alum Msp

GG 557720

Stem, Indicator

GG 557721

O-Ring

GG 557745

Switch, Proximity, Msp, Ul/Csa, N.O.

GG 557752

SWITCH, PROX, MX/MXP, 4PIN 24VDC

Field Sensitive Magnetic (FSM) Proximity Switch for MXP and MX divider valves, 4 pin CH connector A proximity switch is a magnetically operated sensing device used to detect cycles of a Series Progressive Divider Valve. Install a proximity switch in place of a piston enclosure plug to allow a PLC or lubrication controller to monitor cycles of the divider valve assembly. O-ring sealed proximity switch for Trabon MXP and MX divider valves. Compatible with 24 VDC and 110/240 VAC 4 pin CH electrical connector mates to 12 ft (3.66 m) cable 558025 (straight) and 558026 (90º) UL and CSA Approved – search their respective website for the certifications or contact Graco Technical Assistance Maximum cycle 125 cpm 2A @ 240 VAC; 4A @ 110 VAC; 3A @ 24 VDC Lubriquip part number 527-007-110

GG 557781

SWITCH, LIMIT SPDT

Replacement Low Level Switch, 15 Amp, SPDT For use with Modu-Flo and E-Series Pumps.

Replacement Low Level Switch for 563322

Lubriquip part number 529-726-001 Trabon part number 29726-1

GG 557797

CAP, FILL, RESERVOIR

Reservoir Fill Cap For use with Lube Master Pump Packages.

Fill Cup

Lubriquip part number 534-147-000 Trabon part number 34147

GG 557825

SWITCH, LEVEL, N/C

Replacement Low Level Switch, 10 W, 115 VAC, Reed-Type, Single Pole, Single Throw For use with Modu-Flo and Miniature Meter Flo Pumps.

Replacement Low Level Switch for 563014, 563015, 563016

Lubriquip part number 541-603-001

GG 557828

Switch, Press Adj, Moist Resist

GG 557840

Gear, Cluster, 36/27 Tooth Stl

GG 557842

Gear, Cluster, 27/18 Tooth Stl

GG 557844

Gear, Spur 27 Tooth Stl

GG 557845

Gasket, End Plate Mvb Pump

GG 557866

GAUGE, 3000 PSI 1/4NPT C/B LIQ

Graco 557866 Pressure Gauge, Back-Mounted, 0-3000 psi, 2 1/2 in. Dial Diameter

• Dial Diameter (cm): 6
• Dial Diameter (in): 2.5
• Dial Diameter (mm): 64
• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35
• Inlet Thread Type: NPT
• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000