Parts

GG HSHB7B

XD SERIES 30 REEL, 3/8 X 75, GREASE, BLUE

Graco HSHB7B XD30, Grease, 1/2 in. (13 mm) Inlet, 3/8 in. X 75 ft. (10 mm X 23 m) Hose, NPT, Truck/Bench Mount, Metallic Blue

Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

• Model: XD
• Series: 30

• Application: Grease

• Color: Metallic Blue

• Dry Weight (lb): 98

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 75
• Hose Length (m): 23

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPSM

• Maximum Working Pressure (psi): 5000

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

• Overall Height (in): 23.10
• Overall Height (mm): 588.00
• Overall Length (in): 22.12
• Overall Length (mm): 561.73
• Overall Width (in): 9.0
• Overall Width (mm): 229

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Grease

GG HSHFFB

XD SERIES 30 REEL, 3/8 X BARE, P/W, BLUE

Graco HSHFFB XD30, Pressure Wash, 1/2 in. (13 mm) Inlet, Bare Reel (3/8 in. X 75 ft. (10 mm X 23 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue

Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

• Model: XD
• Series: 30

• Application: Pressure Wash

• Bare Reel: 1

• Color: Metallic Blue

• Dry Weight (lb): 98

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 75
• Hose Length (m): 23

• Hose Reel Type: Bare Reel
• Includes Hose: No
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPSM

• Maximum Working Pressure (psi): 5000

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

• Overall Height (in): 23.10
• Overall Height (mm): 588.00
• Overall Length (in): 22.12
• Overall Length (mm): 561.73
• Overall Width (in): 9.0
• Overall Width (mm): 229

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Pressure Wash

GG HSLD5B

XD SERIES 30 REEL, 3/4 X 50, A/W, BLUE

Graco HSLD5B XD30, Air/Water/Antifreeze/WWS, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue

Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

• Model: XD
• Series: 30

• Application: Air, Water, Antifreeze, WWS

• Color: Metallic Blue

• Dry Weight (lb): 98

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/4
• Hose Inside Diameter (mm): 19.05
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPSM

• Maximum Working Pressure (psi): 300

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05

• Overall Height (in): 23.10
• Overall Height (mm): 588.00
• Overall Length (in): 22.12
• Overall Length (mm): 561.73
• Overall Width (in): 9.0
• Overall Width (mm): 229

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG HSMD5B

XD SERIES 30 REEL, 3/4 X 50, OIL, BLUE

Graco HSMD5B XD30, Oil, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue

Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications

• Model: XD
• Series: 30

• Application: Oil

• Color: Metallic Blue

• Dry Weight (lb): 98

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 3/4
• Hose Inside Diameter (mm): 19.05
• Hose Length (ft): 50
• Hose Length (m): 15

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPSM

• Maximum Working Pressure (psi): 1250

• Mount Location: Truck Mount, Bench Mount

• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05

• Overall Height (in): 23.10
• Overall Height (mm): 588.00
• Overall Length (in): 22.12
• Overall Length (mm): 561.73
• Overall Width (in): 9.0
• Overall Width (mm): 229

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Oil

GG HV-2000C-S102

GG L010S3

LOWER, CHEMICAL, 10, SST, UCUP, LP

Graco L010S3 Z-Pump, 10 cc, Severe Duty, S3

Z-Pumps are positive displacement pump components for use with the Graco NVH meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S3

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR for NVH

• Maximum Flow Rate (GPM): 0.16

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 10

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L010S5

LOWER, CHEMICAL, 010, SST, UCUP, HW

Graco L010S5 Z-Pump, 10cc, High Wear, S5

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• High Wear coatings and 1/2 inch (1.27 cm) checks easily manage material wear from thermal interface material (TIMs), acrylics, or other abrasive material applications.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S5

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): .5"
• Ball Material: Silicon Nitride

• Coating Type: High Wear

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 3/4-16
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 0.16

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 10

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

• Maximum Working Pressure (psi): 3500

GG L020S1

LOWER, CHEMICAL, 20, SST, UCUP

Graco L020S1 Z-Pump, 20 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 0.32

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 20

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L020S4

LOWER, CHEMICAL, 020, SST, UCUP

Graco L020S4 Z-Pump, 20 cc, Severe Duty, S4

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S4

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1/2
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 0.32

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 20

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L036C0

GG L040S1

LOWER, CHEMICAL, 40, SST, UCUP

Graco L040S1 Z-Pump, 40 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 0.63

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 40

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L040S4

LOWER, CHEMICAL, 040, SST, UCUP

Graco L040S4 Z-Pump, 40 cc, Severe Duty, S4

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1/2 inch (1.27 cm) checks easily manage material wear from silicones, sealants, epoxies, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S4

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1/2
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 0.63

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 40

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L048C0

GG L054C0

GG L060CM

LOWER, CM060 MAXLIFE

Graco L060CM Carbon Steel MaxLife Check-Mate 60 Lower

• Model: Check-Mate

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT

• For Use With: Check-Mate Pump Packages

• Maximum Flow Rate (GPM): 0.9

• Maximum Operating Temperature ( degree F): 180
• Maximum Output (cm cu ): 60

• Maximum Pump Speed (CPM): 60

• Maximum Working Pressure (psi): 6100

GG L072C0

GG L080S1

LOWER, CHEMICAL, 80, SST, UCUP

Graco L080S1 Z-Pump, 80 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 1.27

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 80

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L100S8

LOWER, CHEMICAL, 100, S8

Graco L100S8 Z-Pump, 100 cc, Elite, S8

Z-Pumps are positive displacement pump components for use with the Graco and meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Elite coatings and 7/8 inch (2.22 cm) checks easily manage material wear from thermal interface material (TIMs) or other abrasive applications.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Elite high-wear pump seals reduce maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S8

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 7/8
• Ball Material: Silicon Nitride

• Coating Type: Elite

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: EFR, HFR

• Maximum Flow Rate (GPM): 1.59

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 100

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L105S1

LOWER, CHEMICAL, 105, SST, UCUP

Graco L105S1 Z-Pump, 105 cc, Severe Duty, S1

Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.

• Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
• Precision control eliminates pressure spikes and guarantees on ratio dispense.
• Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.

• Model: Z-Pump
• Series: S1

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Industrial

• Ball Check Size (in): 1
• Ball Material: Silicon Nitride

• Coating Type: Severe Duty

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: SAE

• For Use With: HFR

• Maximum Flow Rate (GPM): 1.66

• Maximum Operating Temperature (°F): 180
• Maximum Output (cm³): 105

• Maximum Pump Speed (CPM): 60

• Maximum Viscosity (cP): 3000000

GG L10XCS

DURA-FLO LEGACY 1000 PUMP, RECIP, DISPL

Graco L10XCS Carbon Steel 1000 cc Lower

• Model: Dura-Flo

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Compatible Material: Motor Oil, Gear Oil, Automatic Transmission Fluid, Oil

• Fluid Inlet Size (cm): 5.08
• Fluid Inlet Size (in): 2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• For Use With: Dura-Flo Pumps

• Maximum Operating Temperature ( degree F): 150
• Maximum Output (cm cu ): 1000

• Maximum Working Pressure (psi): 1180

GG L145C1

GG L145C3

GG L145CP

GG L14AC0

GG L18AC1