Parts

GG 557766

ROD, TIE, MXP, 3 SECTION

Graco 557766 Trabon MXP Divider Valve - 3 Section Tie Rod (3 Required)

• 3-Section Tie Rod
• Three required per assembly
• Lubriquip part number 527-300-270

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

GG 557767

ROD, TIE, MXP, 4 SECTION

Graco 557767 Trabon MXP Divider Valve - 4 Section Tie Rod (3 Required)

• 4-Section Tie Rod
• Three required per assembly
• Lubriquip part number 527-300-280

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

GG 557797

CAP, FILL, RESERVOIR

Graco 557797 Reservoir Fill Cap

• Fill Cup
• Lubriquip part number 534-147-000
• Trabon part number 34147

• For Use With: LubeMaster Pumps

GG 557866

GAUGE, 3000 PSI 1/4NPT C/B LIQ

Graco 557866 Pressure Gauge, Back-Mounted, 0-3000 psi, 2 1/2 in. Dial Diameter

• Dial Diameter (cm): 6
• Dial Diameter (in): 2.5
• Dial Diameter (mm): 64

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 557936

GG 557941

GG 558015

GG 558025

CABLE, CONN CABLE 4PN 24V

Graco 558025 Proximity Switch Connector Cable - 24 V, 12 ft, 4-Pin, Straight Connector, Polarity, PNP

• 4-pin cable, straight connector, polarity, PNP, 12 feet (3.66 m)
• Lubriquip part number 570-999-953

• For Use With: Proximity Switches

GG 558906

COUPLER, 1/4, W/CHECK

Graco 558906 Mating Coupler/Coupling for grease fill stud on Trabon Reservoirs, 1/4 in. NPT female, with Check

• Mating Coupler for Trabon Grease Fill Stud
• Former part numbers: Lubriquip 506-322-000, Trabon 6322
• Mates to fill stud 557374
• Trabon part number 6322

• Series: Trabon

• Connection Type: Threaded

• End A Inlet Thread Gender: Female
• End A Inlet Thread Type: NPTF

• Finish/Coating: Cadium

• Inlet Size (in): 1/4-18

• Inlet Thread Gender: Female

• Material: Brass

• Maximum Working Pressure (bar): 21
• Maximum Working Pressure (kPa): 2100
• Maximum Working Pressure (MPa): 2.1
• Maximum Working Pressure (psi): 300

• Outlet Size (in): 1/4 inch diameter Quick Disconnect, mates to air chuck style grease fill stud used on Trabon grease reservoirs
• Outlet Thread Gender: None

GG 558927

BRACKET, MTG RTN FILTER

Graco 558927 Filter Mounting Bracket

• Filter Mounting Bracket
• Lubriquip part number 521-010-440

• Color: Gray

• Finish/Coating: Paint

• For Use With: Spin-On Filter

• Material: Steel

• Overall Height (cm): 12.5425
• Overall Height (in): 4.938
• Overall Height (mm): 125.4252
• Overall Length (cm): 6
• Overall Length (in): 2.5
• Overall Length (mm): 64
• Overall Width (cm): 6.985
• Overall Width (in): 2.75
• Overall Width (mm): 69.85

GG 560620

BLOCK, INLET MACH MX

Graco 560620 Trabon MX Divider Valve - MX Inlet

• MX inlet
• Lubriquip part number 510-914-003

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

GG 560643

BLOCK, INLET SECTION, MJ

Graco 560643 Trabon MJ Divider Valve - Standard Inlet

• Standard Inlet (Must be ordered in multiples of five)
• NPSF
• Lubriquip part number 510-992-002

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPSF

GG 560645

BLOCK, END SECTION MJ

Graco 560645 Trabon MJ Divider Valve - Standard End Section

• Standard end section (Must be ordered in multiples of five)
• NPSF
• Lubriquip part number 510-994-002

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment

• Outlet Thread Type: NPSF

GG 561471

GG 562502

MJ VALVE, BLOCK, STD SECTION, MJ-15S

Graco 562502 Trabon MJ Series-Flo Divider Valve - MJ-15S - 0.030 in cu (0.49 cm cu )

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

• Space efficient - from 6 to 16 points from one block assembly
• Built-in outlet check valves ensure accurate lube delivery, every time
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 001-015-001

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.030

• Divider Valve Series: MJ

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #1

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562503

MJ VALVE, ASSY MJ 5T

Graco 562503 Trabon MJ Series-Flo Divider Valve - MJ-5T - 0.005 in cu (0.082 cm cu )

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

• Space efficient - from 6 to 16 points from one block assembly
• Built-in outlet check valves ensure accurate lube delivery, every time
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 001-005-002

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.005

• Divider Valve Series: MJ

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #1

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562505

MJ VALVE, ASSY MJ 15T

Graco 562505 Trabon MJ Series-Flo Divider Valve - MJ-15T - 0.015 in cu (0.246 cm cu )

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

• Space efficient - from 6 to 16 points from one block assembly
• Built-in outlet check valves ensure accurate lube delivery, every time
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 001-015-002

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.015

• Divider Valve Series: MJ

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #1

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562510

MJ VALVE, ASSY IND MJ 10T

Graco 562510 Trabon MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-10T - 0.010 in cu (0.16 cm cu )

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

• Space efficient - from 6 to 16 points from one block assembly
• Built-in outlet check valves ensure accurate lube delivery, every time
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 001-010-602

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: Cycle Indicator

• Discharge Per Piston Stroke (in cu ): 0.010

• Divider Valve Series: MJ

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 60

• Maximum NLGI Grade: #1

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562511

MJ VALVE, ASSY IND MJ 15T

Graco 562511 Trabon MJ Series-Flo Divider Valve with Right Hand Cycle Pin - MJ-15T - 0.015 in cu (0.246 cm cu )

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

• Space efficient - from 6 to 16 points from one block assembly
• Built-in outlet check valves ensure accurate lube delivery, every time
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 001-015-602

• Model: Trabon
• Series: MJ

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: Cycle Indicator

• Discharge Per Piston Stroke (in cu ): 0.015

• Divider Valve Series: MJ

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 60

• Maximum NLGI Grade: #1

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562516

MX VALVE, ASSY 050S

Graco 562516 Trabon MX Divider Valve - MX-50S - 0.100 in cu (1.64 cm cu )

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

• Lubricates large bearings
• Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
• Durable design withstands harsh environments and operating conditions
• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 004-050-001

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.100

• Divider Valve Series: MX

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

• Outlet Size (cm): 0.635
• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562517

MX VALVE, ASSY 050T

Graco 562517 Trabon MX Divider Valve - MX-50T - 0.050 in cu (0.82 cm cu )

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

• Lubricates large bearings
• Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
• Durable design withstands harsh environments and operating conditions
• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 004-050-002

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.050

• Divider Valve Series: MX

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

• Outlet Size (cm): 0.635
• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562540

MX VALVE, ASSY 100S

Graco 562540 Trabon MX Divider Valve - MX-100S - 0.200 in cu (3.28 cm cu )

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with its economical and compact design.

• Lubricates large bearings
• Delivers up to 0.3 cubic inches (4.92 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
• Durable design withstands harsh environments and operating conditions
• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 004-100-001

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.200

• Divider Valve Series: MX

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 93
• Maximum Operating Temperature ( degree F): 200

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

• Outlet Size (cm): 0.635
• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF

GG 562573

MGO VALVE, ASSY MGO 600S SAE

Graco 562573 Trabon MGO Modular Divider Valve - MGO-600S - 1.200 in cu (19.7 cm cu )

While critical bearings are hard at work on your largest machine tools, Gracos line of centralized and automatic lubrication systems is delivering precise amounts of lubricant at frequent intervals to every lube point - even in hard to reach areas.

• Lubricates large bearings
• Delivers up to 1.2 cubic inches (19.7 cubic centimeters) per cycle and has a wide range of accessories to monitor critical lubrication points
• Largest output available with 22 outlets and 11 working sections
• TFE standard seals allow for maximum fluid compatibility and high temperature use
• Lubriquip part number 007-600-031

• Model: Trabon
• Series: MGO

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 1.200

• Divider Valve Series: MGO

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 185

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176

• Maximum Working Pressure (bar): 413.7
• Maximum Working Pressure (kg/cm 2): 421.8
• Maximum Working Pressure (kPa): 41370
• Maximum Working Pressure (psi): 6000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 1

• Outlet Size (in): 7/8
• Outlet Thread Gender: Female
• Outlet Thread Type: SAE ORB

GG 562586

GG 562658

MD VALVE, FEEDER, 4

Graco 562658 Trabon MD Mono Block Divider Valve - MD-4

The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications

• 4 outlets
• Easy to install on new or existing equipment
• Use our cycle indicator pin models to provide positive assurance of a successful lube event
• Lubriquip part number 103-000-151

• Model: Trabon
• Series: MD

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.012

• Divider Valve Series: MD

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.1750

• Inlet Thread Gender: Female
• Inlet Thread Type: NPSF

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20670
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (bar): 14

• Minimum Working Pressure (psi): 200

• Number of Outlets: 4

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.1750
• Outlet Thread Gender: Female
• Outlet Thread Type: NPSF