Parts
RAC X LTX TIP, SPRAY, (539)
GG LTX539
GG LTX539
RAC X LTX TIP, SPRAY, (539)
Graco LTX539 RAC X SwitchTip, 539
The Reverse-A-Clean (RAC) 539 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: LTX SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC X HandTite Tip Guard
- Maximum Fan Width (cm): 25
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.63
- Maximum Flow Rate (L/min): 6.17
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.039
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$65.25
RAC X LTX TIP, SPRAY, (641)
GG LTX641
GG LTX641
RAC X LTX TIP, SPRAY, (641)
RAC X SwitchTip, 641 The Reverse-A-Clean (RAC) 641 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.041 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, (645)
GG LTX645
GG LTX645
RAC X LTX TIP, SPRAY, (645)
RAC X SwitchTip, 645 The Reverse-A-Clean (RAC) 645 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.045 inch orifice. Reverse the SwitchTip to easily clear clogs. Used for residential, commercial or industrial applications. Best Tip on the Market- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
$65.25
RAC X LTX TIP, SPRAY, (723)
GG LTX723
GG LTX723
RAC X LTX TIP, SPRAY, (723)
Graco LTX723 RAC X SwitchTip, 723
The Reverse-A-Clean (RAC) 723 RAC X SwitchTip produces a 14 to 16 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: LTX SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC X HandTite Tip Guard
- Maximum Fan Width (cm): 35
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.57
- Maximum Flow Rate (L/min): 2.16
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.023
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
$65.25
SDX SERIES 10 REEL, HOSE
GG SDL25C
GG SDL25C
SDX SERIES 10 REEL, HOSE
Graco SDL25C SDX™ 10, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 3/8 in X 50 ft (10 mm X 15 m) Hose, NPT, Overhead Mount, Red
Choose Graco’s flagship SDX hose reels for high-quality performance and versatility. Built using specially crafted components, including a rigid metal frame and low-friction swivels, it’s available in five colors
Application: With its durable metal spool and rigid pedestal frame, the compact SDX Series is ideal for indoor and limited outdoor use in car dealerships, fleet maintenance, public works garages and light-utility service trucks.- Includes a stainless-steel swivel shaft for extended service life when transporting air, water, antifreeze, windshield wash solvent and other fluids.
- Low-Friction Cartridge Swivel - Provides smooth reel performance with an easy-to-replace swivel cartridge, simplifying repairs.
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (10.7-19.8 meters) hose (NPT air/water) capacity for a wide variety of applications
- Durable Finish - Baked-on enamel finish protects reel from corrosion
- Model: SDX
- Series: 10
- Application: Air, Water, Antifreeze, WWS
- Color: Red
- Frame Type: Single Pedestal
- Hose Inside Diameter (in): 3/8
- Hose Inside Diameter (mm): 9.525
- Hose Length (ft): 50
- Hose Length (m): 15
- Hose Reel Type: Reel with Hose
- Includes Hose: Yes
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Gender: Male
- Inlet Thread Type: NPSM
- Maximum Temperature (°C): 87
- Maximum Temperature (°F): 190
- Maximum Working Pressure (psi): 300
- Minimum Temperature (°C): -28
- Minimum Temperature (°F): -20
- Mount Location: Overhead Mount
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Gender: Male
- Outlet Thread Type: NPT
- Overall Height (in): 19.5
- Overall Height (mm): 498
- Overall Length (in): 17.1
- Overall Length (mm): 435
- Overall Width (in): 7
- Overall Width (mm): 177
- Recommended Environment: Indoor, Limited Outdoor
- Recommended Fluid Type: Air, Water, Antifreeze, WWS
$918.00
Orange Steel Foot Switch Guard, 6in Lenght/Width, 4-1/2in Depth
GR 522-B14
GR 522-B14
Orange Steel Foot Switch Guard, 6in Lenght/Width, 4-1/2in Depth
$76.09
WRENCH, PAD
IR 04648739
IR 04648739
Pad Wrench Service Part for IR Sander
For Use With- R035C-C1
- R035C-C1-HL
- R035C-C2
- R035C-C2-HL
- R035C-S1
- R035C-S1-HL
- R035C-S2
- R035C-S2-HL
- R036C-C1
- R036C-C1-HL
- R036C-C2
- R036C-C2-HL
- R036C-C3
- R036C-C3-HL
- R036C-S1
- R036C-S1-HL
- R036C-S2
- R036C-S2-HL
- R036C-S3
- R036C-S3-HL
$15.00
ANTIFREEZE
IR 10GW
IR 10GW
Air Tool Lubricant and Antifreeze, Class 1 #10, 1 Gallon
Product Application and Uses: For use with persussive assembly and impact wrenches
$163.00
GASKET
IR 1105-223
IR 1105-223
Gasket for Ingersoll Rand 105 and 1105MAX Series Ratchet Wrench
$15.00
BUSHING, DRIVE
IR 1105-36
IR 1105-36
Drive Bushing Replacement Part for Ingersoll Rand 105 and 1105MAX Series Ratchet Wrench
$15.00
BUTTON, REVERSE
IR 1105-38
IR 1105-38
Reverse Button Replacement Part for Ingersoll Rand 105 and 1105MAX series Ratchet Wrench
$15.00
O-RING
IR 117-168
IR 117-168
O-Ring Replacement Part for Ingersoll Rand 115, 116, 117 Series Air Hammer
$15.00
HAMMER CASE ASSEMBLY
IR 131-A927
IR 131-A927
Hammer Case Assembly for Ingersoll Rand 231 Series Impact Wrench
$91.00
HOUSING
IR 140-501
IR 140-501
Housing for Ingersoll Rand 140EP Engraving Pen
Includes: 1 housingProduct Application and Uses: For use with Ingersoll Rand 140EP Engraving Pen
Product Length (in): 3.77
Product Width (in): 0.67
Product Height (in): 0.67
Product Weight (lb): 0.15
For Use With
- 140EP
$46.00
NOSE
IR 140-502
IR 140-502
Nose for Ingersoll Rand 140EP Engraving Pen
Includes: 1 NoseProduct Application and Uses: For use with Ingersoll Rand 140EP Engraving Pen
For Use With
- 140EP
$61.00
PISTON
IR 140-507
IR 140-507
Piston for Ingersoll Rand 140EP Engraving Pen
Includes: 1 pistonProduct Application and Uses: For use with Ingersoll Rand 140EP Engraving Pen
Product Length (in): 0.71
Product Width (in): 0.31
Product Height (in): 0.31
Product Weight (lb): 0.01
For Use With
- 140EP
$15.00
Stylus
IR 140-516
IR 140-516
Stylus for Ingersoll Rand 140EP Engraving Pen
Includes: 1 stylusProduct Application and Uses: For use with Ingersoll Rand 140EP Engraving Pen
Product Length (in): 2.19
Product Width (in): 0.34
Product Height (in): 0.34
Product Weight (lb): 0.01
For Use With
- 140EP
$91.00
GRIP
IR 140-747
IR 140-747
Grip for Ingersoll Rand 140EP Engraving Pen
Includes: 1 gripProduct Application and Uses: For use with Ingersoll Rand 140EP Engraving Pen
Product Length (in): 1.61
Product Width (in): 0.63
Product Height (in): 0.63
Product Weight (lb): 0.01
For Use With
- 140EP
$15.00
