INGERSOLL-RAND IR TOOL S12880
Tune-Up Kit
IR 2131P-TK2
Tune-up Kit for Ingersoll Rand 2131P Series Impact Wrench
Impact, 3/4In Heavy Duty, 5750 Rpm
IR 2161P
3/4" Air Impact Wrench, 1250 ft-lb Torque, Thru-hole Retainer, Pistol
Description: The metal housing and steel hammer case of the 2161 Series Impact Wrench makes this one of the toughest tools on the market. You'll also benefit from the twin hammer impact mechanism, which provides a more even impact with every blow and makes it less sensitive to changes in air pressure.
Features And Benefits:
- Durability: This heavy-duty impact wrench is tough enough to handle harsh environments and repeated drops.
- Versatility: The 2161 Series is an ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
- Increased Safety: The square pin drive of the 2161 Series provides the strongest connection to the socket to increase safety, especially when doing overhead work.
Product Application and Uses:
Ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 46
- Air Consumption @ Load (l/min): 1303
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 55
- Average Air Consumption (l/min): 1558
- Blows per Min: 1025
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Maintenance Duty
- End Plates: Steel
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 97.7 / 108.7
- Hammer Case: Steel
- Handle Material: Composite
- Housing Material: Aluminum core with composite sleeve
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 90.7 / 101.8
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1250
- Max Torque (in-lb): 15002
- Max Torque (nm): 1695
- Min Hose Size (in): 1/2
- Motor: Reverse Bias
- Number of Power Settings: 3
- Power Source: Air Powered
- Product Length (in): 8.5
- Product Width (in): 3.5
- Product Height (in): 9.5
- Product Weight (lb): 12.14
- Recommended Forward Torque Range (ft-lb): 300-1000
- Recommended Forward Torque Range (in-lb): 3602-12002
- Recommended Forward Torque Range (nm): 407-1356
- Retainer Type: Thru-hole
- Side to Center Distance (in): 1.75
- Side to Center Distance (mm): 44
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 11.5
- Warranty: 1-year
- Accessories: 2161-BOOT
- Lubrication: 50P
- Parts: 2141-THK1
- Parts: 2161-36
- Parts: 2161-366
- Parts: 2161-739
- Parts: 2161-TK2
1 In Sq Dr Impact Pistol Grip1250 Ft Lbs
IR 2171XP
1" Air Impact Wrench, 1250 ft-lb Torque, Friction Ring Retainer, Pistol
Description: The metal housing and steel hammer case of the 2171 Series Impact Wrench makes this one of the toughest tools on the market. You'll also benefit from the twin hammer impact mechanism, which provides a more even impact with every blow and makes it less sensitive to changes in air pressure.
Features And Benefits:
- Durability: This heavy-duty impact wrench is tough enough to handle harsh environments and repeated drops.
- Versatility: The 2171 Series is an ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
Product Application and Uses:
Ideal impact wrench for use in multiple markets, from vehicle repair and heavy machinery to general industrial and facility maintenance.
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 46
- Air Consumption @ Load (l/min): 1303
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 10
- Average Air Consumption (l/min): 283
- Blows per Min: 1025
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Maintenance Duty
- End Plates: Steel
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 96.4 / 107.4
- Hammer Case: Steel
- Handle Material: Composite
- Housing Material: Aluminum core with composite sleeve
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 95.3 / 106.3
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1250
- Max Torque (in-lb): 15002
- Max Torque (nm): 1695
- Min Hose Size (in): 1/2
- Motor: Reverse Bias
- Number of Power Settings: 3
- Power Source: Air Powered
- Product Length (in): 8.5
- Product Width (in): 3.5
- Product Height (in): 9.5
- Product Weight (lb): 12.32
- Recommended Forward Torque Range (ft-lb): 300-1000
- Recommended Forward Torque Range (in-lb): 3602-12002
- Recommended Forward Torque Range (nm): 407-1356
- Retainer Type: Friction Ring
- Side to Center Distance (in): 1.75
- Side to Center Distance (mm): 44
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 10.3
- Warranty: 1-year
- Lubrication: 50P
- Parts: 2141-THK1
- Parts: 2161-36
- Parts: 2161-739
- Parts: 2161-TK2
- Parts: 834-61
- Parts: BBFM-557
Tune-Up Kit
IR 231-TK2
Tune-up Kit for Ingersoll Rand 231 Series Impact Wrench
- For Use With: 231C
- For Use With: 231C-AP
- For Use With: 231HA
- For Use With: 231HA-2
Air Impact Wrench, Ext A
IR 261-6
3/4" Air Impact Wrench, 6" Ext Anvil, Super Duty, 1100 ft-lb Torque, Friction Ring Retainer, Pistol
Description: The 261 Series impact wrench is ideal for vehicle repair and heavy truck and machinery jobs where you'll benefit from the square socket retaining ring and the power behind the vane motor. Trigger actuation and a power regulator let you complete projects with control and ease.
Features And Benefits:
- Power: The 6 vane motor on the 261 Series provides a high torque output for increased power.
- Jumbo Hammer Mechanism: The patented jumbo hammer is unaffected by air pressure changes and delivers 1100 ft-lbs. of max torque and a working torque of 200-900 ft-lbs.
- Square Socket: The square socket retaining ring makes this an ideal impact wrench for projects where you need increased socket connection, like auto repair and heavy truck and machinery jobs.
- Lasting Performance: This power tool is equipped with a pressure-fed lube system which provides trouble-free, longer performance.
- Handle Exhaust: Handle exhaust directs dust and dirt from being blow at you while working as it directs air away from the operator.
- Extended Reach: The 6-inch extended anvil provides you with increased reach that's invaluable when working with deeper fasteners.
Product Application and Uses:
Applications include tire changing, engine repair, engine component installation and removal, body work installation and removal, farm implement assembly and repair, auto repair and maintenance, and truck repair.
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 38
- Air Consumption @ Load (l/min): 1076
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: 6" Extended
- Average Air Consumption (cfm): 9.5
- Average Air Consumption (l/min): 269
- Blows per Min: 1000
- Color: Silver
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Cast Iron
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 100.3 / 111.3
- Hammer Case: Steel
- Handle Material: Aluminum
- Housing Material: Aluminum
- Impact Mechanism: Jumbo Hammer
- Impacting Sound Pressure/Power Db(A): 98.4 / 109.4
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 5500
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1100
- Max Torque (in-lb): 13196
- Max Torque (nm): 1491
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 14.8
- Product Width (in): 3.76
- Product Height (in): 10.3
- Product Weight (lb): 13.7
- Recommended Forward Torque Range (ft-lb): 200-600
- Recommended Forward Torque Range (in-lb): 2399-7196
- Recommended Forward Torque Range (nm): 271-813
- Recommended Reverse Torque (ft-lb): 200-600
- Recommended Reverse Torque (nm): 271-813
- Retainer Type: Friction Ring
- Side to Center Distance (in): 1.88
- Side to Center Distance (mm): 48
- Special Features: Extended anvil
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 10.4
- Warranty: 1-year
Boot
IR 261-BOOT
Protective Boot for Ingersoll Rand 261 Series Impact Wrench
Description: Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.
Features And Benefits:
- Protects surrounding surfaces from scratches, nicks ect.
- Protects tool from damage if dropped.
- Adds further protection from unwanted contaminates that can affect tool performance.
- Color: Red
- Housing Material: Thermoplastic Polymer
- For Use With: 261
- For Use With: 261-3
- For Use With: 261-6
Hammer Kit
IR 261-THK1
Tune-up Kit for Ingersoll Rand 261 Series Impact Wrench
- For Use With: 261
Air Impact Wrench, Ext A
IR 280-6
1" Air Impact Wrench, 6" Ext Anvil, Super Duty, 1600 ft-lb Torque, Thru-hole Retainer, D-Handle Inside Trigger
Description: For a versatile impact wrench that doesn't compromise safety for power, the 280 Series can't be beat. The D-shaped handle fits comfortably in your hand and the jumbo hammer impact mechanism provides an excellent power-to-weight ratio.
Features And Benefits:
- Durability: The steel hammer case and metal housing of the 280 Series make this impact wrench incredibly durable and long-lasting.
- Increased Safety: Square thru-hole retainer increases on-the-job safety by providing a strong socket connection.
- Power: The jumbo hammer impact mechanism and 6 vane motor gives you the ability to power up to 1600 ft.-lbs. of torque for your toughest applications.
- Extended Reach: The 6-inch extended anvil provides you with increased reach that's invaluable when working with deeper fasteners.
Product Application and Uses:
Applications include tire changing, engine repair, engine component installation and removal, body work installation and removal, farm implement assembly and repair, auto repair and maintenance, and truck repair.
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Consumption @ Load (cfm): 55
- Air Consumption @ Load (l/min): 1557
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: 6" Extended
- Average Air Consumption (cfm): 10
- Average Air Consumption (l/min): 283
- Blows per Min: 750
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 107.7 / 118.7
- Hammer Case: Steel
- Handle Material: Composite
- Housing Material: Aluminum core with composite sleeve
- Impact Mechanism: Jumbo Hammer
- Impacting Sound Pressure/Power Db(A): 103 / 114
- Max Bolt Diameter (in): 1.25
- Max Free Speed (rpm): 6000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1600
- Max Torque (in-lb): 19197
- Max Torque (nm): 2169
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 18.5
- Product Width (in): 4.8
- Product Height (in): 6.7
- Product Weight (lb): 23.8
- Recommended Forward Torque Range (ft-lb): 148-1003
- Recommended Forward Torque Range (in-lb): 1770-12037
- Recommended Forward Torque Range (nm): 200-1360
- Recommended Reverse Torque (ft-lb): 148-1003
- Recommended Reverse Torque (nm): 200-1360
- Retainer Type: Thru-hole
- Special Features: Extended anvil
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 21.8
- Warranty: 1-year
- Lubrication: 10P
- Parts: 280-TK2
- Parts: 2934-42-6
3/4" Angle Impact
IR 2920B9
3/4" Air Impact Wrench, Super Duty, 550 ft-lb Torque, Thru-hole Retainer, D-Handle Inside Trigger
Description: The 2920 Series' finely tuned motor and power regulator make this wrench one to beat. Reliable, durable and variable, it can get any job done.
Features And Benefits:
- Durability: This wrench can withstand drops or harsh conditions, thanks to its steel hammer case and metal housing.
- Reliability: With a twin hammer impact mechanism that delivers even blows every time, and a power regulator that helps keep control, you'll never doubt that this wrench will perform the way you want it to. Comes with a 1-year warranty.
- Pressure-fed mechanism lubrication
- Integral muffler
Product Application and Uses:
Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 36
- Average Air Consumption (l/min): 1020
- Blows per Min: 950
- Color: Grey
- Configuration/Handle Type: D-Handle
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Cast Iron
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 88.8 / 99.8
- Hammer Case: Steel
- Handle Material: Composite
- Housing Material: Aluminum core with composite sleeve
- Impact Mechanism: Twin Hammer
- Max Bolt Diameter (in): 1
- Max Free Speed (rpm): 5000
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 550
- Max Torque (in-lb): 6603
- Max Torque (nm): 746
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 17.5
- Product Weight (lb): 23.69
- Recommended Forward Torque Range (ft-lb): 150-500
- Recommended Forward Torque Range (in-lb): 1797-6001
- Recommended Forward Torque Range (nm): 203-678
- Recommended Reverse Torque (ft-lb): 150-500
- Recommended Reverse Torque (nm): 203-678
- Retainer Type: Thru-hole
- Side to Center Distance (in): 1.31
- Side to Center Distance (mm): 33
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 6
- Vibration Level (m/s2): 19.9
- Warranty: 1-year
- Accessories: RR10034S
- Lubrication: 105-LBK1
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2920B-A40
- Parts: 2920B-TK2
3/4 in Impact Titaniam
IR 2925P1TI
3/4" Air Impact Wrench, Super Duty, 1100 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, Pistol
Description: Armed with a titanium hammer case and a special corrosion preventative treatment, this series is rust and corrosion resistant.
Features And Benefits:
- Durability: Thanks to a titanium hammer case, this wrench is both lightweight and durable.
- Reliability: The 2925 Series' twin hammer impact mechanism means it's less sensitive to air pressure fluctuation, which means you never have to worry about your location affecting your wrench's effectiveness.
- Bronze endplates and a corrosion preventative treatment prevents internal in outdoor, wet environments.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool.
- Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.
- Integral muffler
- 1-year warranty
Product Application and Uses:
Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 60
- Air Consumption @ Load (l/min): 1699
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 12
- Average Air Consumption (l/min): 340
- Blows per Min: 1050
- Color: Black
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Super Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6
- Hammer Case: Titanium
- Handle Material: Composite
- Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 95.9 / 106.9
- Max Bolt Diameter (in): 1.125
- Max Free Speed (rpm): 5200
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1497
- Max Torque (in-lb): 17967
- Max Torque (nm): 2030
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: 3
- Power Source: Air Powered
- Product Length (in): 8.9
- Product Width (in): 3.5
- Product Height (in): 9.6
- Product Weight (lb): 12
- Recommended Forward Torque Range (ft-lb): 1298
- Recommended Forward Torque Range (in-lb): 15577
- Recommended Forward Torque Range (nm): 1760
- Retainer Type: Thru-hole
- Side to Center Distance (in): 1.75
- Side to Center Distance (mm): 44
- Special Features: Titanium Hammer case
- Speed Setting: Variable Speed
- Standards/Certifications: CE
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 10.5
- Warranty: 1-year
- Lubrication: 10P
- Parts: 2161-366
- Parts: 2910-726
- Parts: 2925-42-7
- Parts: 834-61
Impactool
IR 2925P3TI
1" Air Impact Wrench, Heavy Duty, 1450 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, Pistol
Description: Armed with a titanium hammer case and a special corrosion preventative treatment, this series is rust and corrosion resistant.
Features And Benefits:
- Thanks to a titanium hammer case, this wrench is both lightweight and durable.
- The twin hammer impact mechanism means it's less sensitive to air pressure fluctuation, which means you never have to worry about your location affecting your wrench's effectiveness.
- Bronze endplates and a corrosion preventative treatment prevents internal in outdoor, wet environments.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool.
- Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.
- Integral muffler.
- 3/8" NPT inlet.
Product Application and Uses:
Vehicle Repair, General Industrial, Facility Maintenance
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 60
- Air Consumption @ Load (l/min): 1699
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 1050
- Color: Black
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Heavy Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 95.9 / 106.6
- Max Bolt Diameter (in): 1-1/8
- Max Free Speed (rpm): 5200
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1497
- Max Torque (in-lb): 17967
- Max Torque (nm): 2030
- Min Hose Size (in): 1/2
- Motor: Non-Biased
- Number of Power Settings: 3
- Power Source: Air Powered
- Product Length (in): 9
- Product Width (in): 3.5
- Product Height (in): 9.6
- Product Weight (lb): 12.2
- Recommended Forward Torque Range (ft-lb): 1298
- Recommended Forward Torque Range (in-lb): 15577
- Recommended Forward Torque Range (nm): 1760
- Retainer Type: Thru-hole
- Side to Center Distance (in): 1.8
- Side to Center Distance (mm): 46
- Special Features: Titanium hammercase
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 10.5
- Warranty: 1-year
- Accessories: SK8H9TN
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 834-61
Impactool
IR 2925RBP1TI
3/4" Air Impact Wrench, Heavy Duty, 1600 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, Pistol
Description: Armed with a titanium hammer case and special Corrode-x, this Series is rust and corrosion resistant.
Features And Benefits:
- Thanks to a titanium hammer case, this wrench is both lightweight and durable.
- The twin hammer impact mechanism means it's less sensitive to air pressure fluctuation, which means you never have to worry about your location affecting your wrench's effectiveness.
- Bronze endplates and a corrosion preventative treatment prevents internal in outdoor, wet environments.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool.
- Optimized for general industrial use, rail, heavy machinery, oil and gas, and shipbuilding.
- Integral muffler.
Product Application and Uses:
Vehicle Repair, General Industrial, Facility Maintenance
- Includes: Bare Tool
- Actuation/Throttle Type/Switch Type: Trigger
- Air Consumption @ Load (cfm): 60
- Air Consumption @ Load (l/min): 1699
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Average Air Consumption (cfm): 12
- Average Air Consumption (l/min): 340
- Blows per Min: 1050
- Color: Black
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 3/4
- Drive Type: Square
- Duty Rating: Heavy Duty
- End Plates: Bronze
- Exhaust Location: Bottom
- Free Speed Sound Pressure/Power Db(A): 99.6 / 110.6
- Hammer Case: Titanium
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Impacting Sound Pressure/Power Db(A): 95.9 / 106.9
- Max Bolt Diameter (in): 1-1/8
- Max Free Speed (rpm): 5200
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1497
- Max Torque (in-lb): 17967
- Max Torque (nm): 2030
- Min Hose Size (in): 1/2
- Motor: Reverse Bias
- Number of Power Settings: 3
- Power Source: Air Powered
- Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 133.3
- Product Length (in): 8.9
- Product Width (in): 3.5
- Product Height (in): 9.6
- Product Weight (lb): 12
- Recommended Forward Torque Range (ft-lb): 1298
- Recommended Forward Torque Range (in-lb): 15577
- Recommended Forward Torque Range (nm): 1760
- Retainer Type: Thru-hole
- Side to Center Distance (in): 1.8
- Side to Center Distance (mm): 46
- Special Features: Titanium hammercase
- Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
- Tool Type: Full-size
- Vanes: 7
- Vibration Level (m/s2): 10.5
- Warranty: 1-year
- Accessories: SK6H8N
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2910-726
- Parts: 834-61
Super Duty Impactool
IR 2940P2
1" Air Impact Wrench, 1600 ft-lb Torque, 810 BPM, Pistol
- Actuation/Throttle Type/Switch Type: Trigger
- Air Inlet: 1/2" NPT
- Air Pressure (psi): 90
- Anvil Length: Standard
- Blows per Min: 810
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Size (in): 1
- Drive Type: Square
- Duty Rating: Industrial Duty
- Exhaust Location: Bottom
- Housing Material: Aluminum
- Impact Mechanism: Twin Hammer
- Max Bolt Diameter (in): 1-3/8
- Max Pressure (bar): 6.2
- Max Torque (ft-lb): 1601
- Max Torque (in-lb): 19206
- Max Torque (nm): 2170
- Min Hose Size (in): 3/4
- Motor: Non-Biased
- Power Source: Air Powered
- Recommended Forward Torque Range (ft-lb): 1003-1601
- Recommended Forward Torque Range (in-lb): 12037-19206
- Recommended Forward Torque Range (nm): 1360 - 2170
- Recommended Reverse Torque (ft-lb): 1003-1601
- Recommended Reverse Torque (nm): 1360-2170
- Sound Pressure/Power Db(A): 94.2 / 105.2
- Tool Type: Full-size
- Vibration Level (m/s2): 18.1
- Vibration Uncertainy K* (m/s2): 5.6
- Warranty: 1-year
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: 2940-TK3
1" Flat Chisel - 12" .58 Hx Shk Rd Col, Qty 1
IR H3R-214F-12
1" Flat Chipping Hammer Chisel Steel, 12" L Hex Shank Round Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand W1A1, W2A1, W3A1, W4A1 chipping hammers.
- Includes: (15) Chipping Hammer Chisel Steels
- Chisel Edge Style: Flat
- Chisel Style: Flat
- Collar Type: Round
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 9.5
- Product Length (in): 12
- Product Width (in): 1
- Product Weight (lb): 1.75
- Shank Length (in): 2.5
- Shank SIze (in): 0.58
- Shank Type: Hex
- For Use With: W1A1
- For Use With: W2A1
- For Use With: W3A1
- For Use With: W4A1
1" Flat Chisel - 18" .58 Hx Shk Rd Col, Qty 1
IR H3R-214F-18
1" Flat Chipping Hammer Chisel Steel, 18" L Hex Shank Round Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand W1A1, W2A1, W3A1, W4A1 chipping hammers.
- Includes: (10) Chipping Hammer Chisel Steels
- Chisel Edge Style: Flat
- Chisel Style: Flat
- Collar Type: Round
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 15.5
- Product Length (in): 18
- Product Width (in): 1
- Product Weight (lb): 2.5
- Shank Length (in): 2.5
- Shank SIze (in): 0.58
- Shank Type: Hex
- For Use With: W1A1
- For Use With: W2A1
- For Use With: W3A1
- For Use With: W4A1
1in Flat Chisel - 24in .58 Hex Shk Ov Col, Qty 1
IR HH1-214F-24
1in Flat Chisel - 24in .58 Hex Shk Ov Col, Qty 1Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand 2DA1SA, 3DA1SA, 4DA1SA, 1A1SA, 2A1SA, 3A1SA, 4A1SA chipping hammers
- Includes: (5) Chipping Hammer Chisel Steels
- Chisel Edge Style: Flat
- Chisel Style: Flat
- Collar Thickness (in): 0.813
- Collar Type: Oval
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 21.625
- Product Length (in): 24
- Product Width (in): 1
- Product Weight (lb): 3
- Shank Length (in): 2.375
- Shank SIze (in): 0.58
- Shank Type: Hex
- For Use With: 1A1SA
- For Use With: 2A1SA
- For Use With: 2DA1SA
- For Use With: 3A1SA
- For Use With: 3DA1SA
- For Use With: 4A1SA
- For Use With: 4DA1SA
1" Flat Chisel - 12" .68 Rd Shk Ov Col, Qty 1
IR HH1-215F-12
1" Flat Chipping Hammer Chisel Steel, 12" L Round Shank Oval Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand 2DA2SA, 3DA2SA, 4DA2SA, 1A2SA, 2A2SA, 3A2SA, 4A2SA chipping hammers
- Includes: (15) Chipping Hammer Chisel Steels
- Chisel Edge Style: Flat
- Chisel Style: Flat
- Collar Thickness (in): 0.813
- Collar Type: Oval
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 9.625
- Product Length (in): 12
- Product Width (in): 1
- Product Weight (lb): 1.75
- Shank Length (in): 2.375
- Shank SIze (in): 0.68
- Shank Type: Round
- For Use With: 1A2SA
- For Use With: 2A2SA
- For Use With: 2DA2SA
- For Use With: 3A2SA
- For Use With: 3DA2SA
- For Use With: 4A2SA
- For Use With: 4DA2SA
Box Chisel - 22" Shk 1-1/8" X 4", Qty 1
IR HHW1-S215-3
Box Chisel - 22" Shk 1-1/8" X 4", Qty 1
HOIST, AIR, 2 TON, HLK SERIES, HOOK, 10ft LIFT, 12 DROP
IR HL2000K-3HA10-C12U
HOIST, AIR, 2 TON, HLK SERIES, HOOK, 10ft LIFT, 12 DROP
Payment options
