INGERSOLL-RAND IR TOOL S12880

IR 52472

IR 529

Vibration Reduced Reciprocating Air Saw, 3/8" Stroke Length, 9,500 Strokes Per Minute, 1.5 lbs

Description: The 529 vibration reduced reciprocating saw is the perfect tool for cutting plastics, fiberglass, sheet metal, aluminum, and a host of other materials. Equipped with a 360-degree swivel inlet, this tool allows you to cut intricate patterns in both flat and curved surfaces.

Features And Benefits:

• Reliability: With a guide that increases blade life, you know your tool will perform well from the moment you buy it.
• Access: With an inline configuration, these saws allow for easier access in tight spaces, so even the toughest jobs can get done.
• Lock-Out Lever: The 529 saw contains a unique system that prevents accidental throttle operation by utilizing a spring-loaded latch that resets each time the lever is released.

Product Application and Uses:

Designed for cutting plastics, fiberglass, composites, aluminum and sheet metal.

• Includes: (3) fine tooth saw blades, (3) coarse tooth saw blades, 8mm hex key
• Actuation/Throttle Type/Switch Type: Safety Lever
• Air Consumption @ Load (cfm): 32
• Air Consumption @ Load (l/min): 1.13
• Air Inlet: 1/4" NPT
• Air Pressure (psi): 90
• Average Air Consumption (cfm): 1.1
• Average Air Consumption (l/min): 31

• Blade Material: High Speed Steel

• Color: Grey
• Configuration/Handle Type: Straight
• Duty Rating: Heavy Duty

• Exhaust Location: Rear- 360 adjustable
• Free Speed Sound Pressure/Power Db(A): 84.3

• Handle Location: Rear
• Handle Material: Aluminum with Rubber Overmold
• Housing Material: Aluminum
• Lock Mechanism: Lever lock in off position

• Max Pressure (bar): 6.2
• Min Hose Size (in): 3/8

• Number of Blades Included: 6
• Number of Power Settings: Continuous
• Power Source: Air Powered
• Product Length (in): 9.7

• Product Width (in): 3.94
• Product Height (in): 2.6
• Product Weight (lb): 1.5

• Sound Pressure/Power Db(A): 84 / 95
• Special Features: Vibration reduced
• Speed Setting: Variable Speed
• Stroke Length (in): 0.38
• Strokes (per min): 9500

• Vibration Level (m/s2): 3.1
• Warranty: 1-year

• Accessories: P4CS-6
• Accessories: P4EV-6
• Accessories: P4FS-6

• Lubrication: 10P

IR 529-274A

Collet Assembly for Ingersoll Rand 529 Reciprocating Saw

IR 529-321

IR 533-664

IR 529-565X

Air Inlet Assembly for Ingersoll Rand 529 Reciprocating Saw, 119, 118 Series Hammer

IR 538-316

Retainer O-Ring Replacement Part for Ingersoll Rand 341, 441 Series Tamper

IR 54028014

IR 53954

IR 54028048

IR 577-283

End Plate Gasket Service Part for Ingersoll Rand Power Tools

IR 588-140

IR 588-157

IR 5982A1

2-1/2" Air Impact Wrench, Super Duty, 20000 ft-lb Torque, Thru-hole Retainer, T-handle

Description: The 5980 series is not only one of the most powerful impacts in the industry, they are also one of the most durable and reliable.

Features And Benefits:

• Durability: With a Cast aluminum hammer case, metal housing, and bronze end-plate, this series is corrosion resistant. It will last through just about anything.
• Reliability: Ingersoll Rand products are built to last, and this series is no different. These tools will deliver the right amount of power every time you pull the trigger. Comes with a 1-year warranty.
• Power: This series has a high torque output and the planetary gear drive delivers smooth constant speed from the motor, so you never have to worry about power.
• Built-in lubricator

Product Application and Uses:

These Air Impact Wrenches are designed to remove and install threaded fasteners requiring high torque. Engineered to withstand the harshest working conditions in oilfields, mines, and shipyards.

• Actuation/Throttle Type/Switch Type: Lever
• Air Inlet: 3/4" NPT
• Air Pressure (psi): 90
• Anvil Length: Standard
• Average Air Consumption (cfm): 130
• Average Air Consumption (l/min): 3681

• Blows per Min: 850

• Color: Grey
• Configuration/Handle Type: T-handle
• Drive Size (in): 2-1/2
• Drive Type: Square
• Duty Rating: Super Duty

• End Plates: Bronze
• Exhaust Location: Bottom
• Free Speed Sound Pressure/Power Db(A): 102.1 / 113.1

• Hammer Case: Aluminum
• Handle Material: Composite
• Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
• Impact Mechanism: Ball and Cam

• Max Bolt Diameter (in): 2.25
• Max Free Speed (rpm): 830
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 20000
• Max Torque (in-lb): 239997
• Max Torque (nm): 27116
• Min Hose Size (in): 1
• Motor: Non-Biased

• Number of Power Settings: Continuous
• Power Source: Air Powered
• Product Length (in): 25.38

• Product Weight (lb): 120
• Recommended Forward Torque Range (ft-lb): 10000
• Recommended Forward Torque Range (in-lb): 119998
• Recommended Forward Torque Range (nm): 13558
• Retainer Type: Thru-hole

• Side to Center Distance (in): 3.5
• Side to Center Distance (mm): 89

• Speed Setting: Variable Speed
• Standards/Certifications: CE

• Tool Type: Full-size
• Vanes: 5
• Vibration Level (m/s2): 20.5
• Warranty: 1-year

• Lubrication: 50P
• Parts: 5820-A724
• Parts: ILA582A1-A727

IR 5C1-581

IR 5C1-401A

IR 5LK2C-B40

IR 5RL-51

IR 5RL-311

IR 5L-323

IR 5RL-273

IR 5R-80

IR 5C1-589A

IR 5RL-A329

IR 5RAN-A40

IR 5L2C6

IR 5RL-667

IR 5C1-853

IR 5RL-NS-TK1

IR 5C1-626A

IR 5RAN-A216

IR 5L2C4-425

IR 5RALST6

IR 5C1-627

IR 5C1-931-4

IR 5R-701

IR 5RLK-739

IR 5C1-930-4

IR 5RLN2C6

IR 5LK2C-24

IR 5UHD-718

IR 5RA/5RL-TK1

IR 5UHD-718-5

Ingersoll Rand Spring Replacement Part, 5-Pack

Product Application and Uses:

For Ingersoll Rand QA4, QA6, QA8 Series Air Angle Wrench and Nut Runner, QE8 Series High Torque Electric Tool, 9RS, 9S, 9T Series Air Angle Wrench, QX Cordless Screwdriver and Nutrunner

IR 61H-119

IR 61H-120

IR 6011

Fitting Replacement Part for Ingersoll Rand Tools

IR 61H150-A424

IR 61H-304

IR 61H150L6

Cone and Plug Air Grinder, 15,000 RPM, 1.33 HP, 3/8" -24 Thread, Side Exhaust

Description: Ingersoll Rand Pro Series grinder are tough, easy to handle and ready to tackle any project you need them to. Specifically designed for heavy duty production applications. With their superior output, they are best suited for big tasks involving heavy material removal in foundries, welding shops, fabrication facilities, steel mills or shipyard.

Features And Benefits:

• POWER: With a powerful vane motor, 1.33HP and 15000 RPM output, these grinders remove materials at top speed for maximum efficiency.
• RELIABILITY: The 61 Pro Series Cone and Plug Grinders come with a built-in mist lubricator, motor controller and grit rejection system to prolong the life of your tools.
• DURABILITY: The metal housing on these grinders ensures a strong tool that can withstand harsh environments and repeated drops.

• Actuation/Throttle Type/Switch Type: Safety Lever
• Air Consumption @ Load (cfm): 40
• Air Consumption @ Load (l/min): 1133
• Air Inlet: 3/8" NPT
• Air Pressure (psi): 90
• Arbor/Collet: 3/8" -24 Thread

• Color: Black
• Configuration/Handle Type: Straight

• Exhaust Location: Side

• Grinder Type: Horizontal Grinder
• Lock Mechanism: Lever lock in off position

• Max Free Speed (rpm): 15000
• Max Pressure (bar): 6.2
• Min Hose Size (in): 1/2

• Power Source: Air Powered
• Product Length (in): 14.75

• Product Weight (lb): 4.25
• Rated Power (hp): 1.33

• Sound Pressure/Power Db(A): 86.8 / 97.8

• Vibration Level (m/s2): <2.5
• Warranty: 1-year
• Wheel Type: Cone

IR 61H-42-4

IR 61H-A12

IR 61H-A3

IR 61H-A32

IR 6305-9932

IR 6306-0032

IR 6760-0303

IR 6940-1625

IR 6AH-103

IR 6AJJ-A8

IR 6ARST6

IR 6LR3

IR 6-DRILLS-TK1

IR 6WT-11

IR 71276315

IR 7500-65

IR 7536-2-B

Milling Air Motor, 1/4" Collet, 4500 RPM, 0.25 HP, 1.3 NM, Non-reversible

• Air Consumption at Max HP (scfm): 18.1
• Air Inlet: 1/8" NPT
• Air Pressure (psi): 90

• Drive Size (in): 1/4
• Drive Type: Collet

• Exhaust Location: Exterior Muffler
• Finish: Black Oxide
• Gear Ratio: 4.83:1
• Gear Reduction: Single
• Gear Train: Planetary

• Housing Material: Steel

• Max Free Speed (rpm): 4500
• Max Pressure (bar): 6.2
• Max Torque (ft-lb): 1.0
• Max Torque (in-lb): 12
• Max Torque (nm): 1.3
• Motor: Rotary Vane
• Motor: Milling
• Mounting Type: Foot Mount Optional

• Power Source: Air Powered

• Product Weight (lb): 0.8
• Rated Power (hp): 0.25
• Rated Power (kW): 0.19
• Reversible: Non-reversible

• Sound Level dB(A): 75
• Speed at Max Power (rpm): 2700

• Torque Output @ Max HP (ft-lb): 0.4
• Torque Output @ Max HP (nm): 0.6
• Warranty: 1-year

• Parts: 31812-1
• Parts: 31812-5

• Parts: 31812-6
• Parts: 31812-7
• Parts: 31812-8
• Parts: 41563

IR 7030JA1F12144

IR 7080JA2F10144

IR 73H-86

IR 6WT-118

IR 728-99-KC8

Keyless 1/2-Inch Chuck, 3/8" -24 Thread

IR 728LA2

IR 7500-92

IR 73H-158

Throttle Valve Face Cap Brass Nut Service Part for Ingersoll Rand Power Tools

IR 6WT-117

IR 6WT-42-4

IR GAA4S6

IR GAA4S8

IR GAA4S6K

IR GAA5S8

IR GAA5S8-H

IR GEA120-136

IR GEA40-135-68

IR GEA2-27

IR GEA240-173

Angle Head Boot Sleeve, 56mm

• Color: Grey

IR GEA40-135EL

IR GEA15-144

IR GEA15-600

IR GEA40-136-211

IR GEA15-B499

IR GEA15-98

IR GEA240-D53-491

IR GEA15-32-M37

IR GEA15-19-M37

IR GEA2S6

IR GEA15-13-M37

IR GEA40-145

IR GEA15-99

IR GAA6S8

IR GEA40-173

Angle Head Boot Sleeve, 48mm

• Color: Grey