Hydraullic Units

EP IPL-100

EP LGH310

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 10
• Capacity KN: 92

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM203

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 3
• Capacity KN: 26,7

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM305

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM306

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 6
• Capacity KN: 48,9

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP MK106

• The Simplex MK106 Maintenance Kit provides a complete assortment of attachments that greatly expands the range of applications. Using thesevarious attachments allows you to custom build spreaders, straightening tools, clamps and a wide variety of other problem solving maintenancetools.
• Set includes a Simplex hand pump, cylinder, hose, gauge and gauge adaptor.
• Heavy duty case included.
• Rated at 5 tons when attachments are used.
• Quick lock and threaded adaptors included.
• Order as a set or individual components.
• R106 is rated at 10 tons at 10,000 psi. When using attachments or extensions do not exceed 5,000 psi (5 tons) reading on the gauge. Accessories & extensions are only rated at 5 tons. S2000A Spreader has an operating capacity of 1 ton.
• Add collar toe and flat base to build custom spreader or toe jack.
• Extensions, custom heads and adapters allow you to create tools that solve hundreds of problems. Simplex MK106 kits are used extensively for collision repair.
• Add a V-base and flat base for special spreading, holding and bending jobs.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: MK
• Stroke Inches: 6
• Stroke MM: 152.4
• SubTypes: Steel General Purpose Cylinder and Steel Hand Pump Set with 17 Cylinder Attachments

• Capacity Imperial Tons: 10
• Capacity KN: 89,0

• Set Includes: R106, P42, HCA6, G5, GA1-Simplex, S2000A, MK4, MK5, MK6, MK7, MK8, MK9, MK10, MK11, MK12, MK13, MK14, MK15, MK16, MK17, MK18, MK19, MK20, MK21

EP NSH1927

NSH-Series Hydraulic Nut Splitters are suited to flange nut splitting jobs in the oil and gas industries.

The heat-treated steel blade with optimized cutting head geometry cuts from one side, and the powerful internal spring brings it back to its starting position.

NSH-Series Nut Cutters are simple and easy to use. They include an ergonomically designed revolving handle for comfortable working and to isolate shock and vibration. The supplied lanyard and revolving anchor point are drop tested to ensure safety.

Nut splitting with the Enerpac Hydraulic Nut Splitters is the safest and most efficient method - taking less time and avoiding costly damage to joint components.

• Type: Cutter
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cutters
• Product Line: Industrial Tools, Bolting Tools
• Series: NSH
• SubTypes: Nut Splitter

• Capacity Imperial Tons: 12
• Capacity KN: 120

• Quick and easy cutting tip replacement
• Drop-tested revolving anchor point and safety lanyard
• Revolving composite handle for vibration and shock isolation
• Nut Splitters include set of hexagon keys and following spare parts:
  - cutting tip
  - tip retention screw
  - spare alignment screw
• Standard Safety Lanyard with each nut splitter. Includes steel cable with carabiners.
• CR400 female half coupler is standard
• Maximum allowable hardness to split is ASTM A194 Gr 2H. Not to be used on square nuts or stainless steel.

• Set Includes: CR400, FSC1
• Accessories: NSH1927CTK

EP P30718

• Type: Service Kit

• SubTypes: Repair Part

EP P-801

EP P80K4

• Type: Service Kit

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Repair Kit

EP PAMG-1405N

EP PRASA10027L

• Type: Wheeled Jack
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: PR
• Stroke Inches: 27
• Stroke MM: 686
• SubTypes: POW'R-RISER Jack Pneumatic

• Capacity Imperial Tons: 100
• Capacity KN: 889

• 4-inch ground clearance for transport over rail and rough terrain
• Three-position handle provides easy tilt back and transport
• Complies with ASME/ANSI B30.1:2015 & CE specifications
• Easy-to-change external filter minimizes down time
• Rugged, fully enclosed 24-inch wide frame with no exposed fittings or hoses
• SUP-R-STACK™ Extension System allows lifting at all heights without blocking

• Accessories: PRTS60, PRU13, PRU14, PRU110, PRUS137, PRE5, PRE7, PRE9, PRE11, PRES6024, PRS1, PRS2, PRS3, PRS4

EP QDH120

• Type: Hydraulic Cylinders
• Max Bar: 350
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: QDH
• Stroke Inches: 0.32
• Stroke MM: 8.1
• SubTypes: Workholding Hollow Plunger Cylinder

• Load can be attached to either end of the cylinder, providing a choice of push or pull actions - both realizing full cylinder capacity
• Very high cylinder capacities contained within small dimensions allow compact fixture designs
• Spring return operation allows for easy unloading of the workpiece
• Threaded collars and base mounting holes allow mounting flexibility, including table-top surfaces and T-slots
• Nickel-plated plungers, plunger wipers and internal venting prevent corrosion and support longer operation life on allHCS models

EP RAC-502

EP RACH-206

EP RACH-302

EP RC15044

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Stop Ring

EP RC-152

EP RC15K32

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Spring Kit

EP RC-254

EP RC-504

EP RK848586A01

• Type: ERP

EP RR-10013

EP RRH1006

RRH-Series Hollow Plunger Hydraulic Cylinders are ideal for tensioning, testing, pulling, and lifting applications. The hollow bore, base threaded holes and collar thread allow attachments that enable the cylinder to deliver both pull and push forces.

RRH double-acting center-hole hydraulic cylinders feature two connection ports to provide hydraulic flow to both advance and retract the plunger. This provides a more controlled retraction than single-acting cylinders.

Cylinders in the RRH-Series are constructed from high-alloy steel and finished with a baked enamel exterior coating. Collar threads and base holes for easy fixturing are provided as standard.

Enerpac has designed and manufactured 10,000 psi (700 bar) high-pressure hydraulic cylinders for many decades. We use only the highest quality materials to ensure they can withstand the most demanding applications. All RRH cylinders meet the safety standards required for high-pressure hydraulic tools.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RRH
• Stroke Inches: 6
• Stroke MM: 153
• SubTypes: Hollow Plunger Cylinder

• Relief valves prevent damage in case of over-pressurization
• Baked enamel finish for increased corrosion resistance
• Collar threads enable easy fixturing
• Double-acting operation for fast retraction
• Nickel-plated, floating center tube increases product life
• Hollow plunger allows for both pull and push forces
• CR-400 couplers and dust caps included on all models
• Plunger wiper reduces contamination, extending cylinder life

• Accessories: HP10016

EP RSM-200