Airpower | Hydraullic Units

LOAD CELL, 2000 LBS.

EP LH-102

LOAD CELL, 2000 LBS.

$3,291.48

160 TON SINGLE -ACTING PANCAKE CYLINDER

EP LPL-1602

160 TON SINGLE -ACTING PANCAKE CYLINDER

$5,220.61

16 Ton, Vertical Lifting Wedge, 0.83 in Lifting Height

EP LW16

16 Ton, Vertical Lifting Wedge, 0.83 in Lifting Height

Choose the LW-Series Vertical Lifting Wedge when you need to lift and lower heavy loads of up to 16-tons with a stable motion without slippage. A minimum insertion gap of 0.39" (10 mm) is needed which expands up to 2.02" (51.5 mm). Retraction force is supplied by the single-acting spring return cylinder. The maximum operating pressure is (10000 psi 700 bar).

The included SB2 stepped safety block provides reassuring support, and can also be used to increase the lifting height to 2.72" (69 mm). The LWB1 is a larger stepped block available as an option.

A compatible hydraulic pump is needed to operate the LW16. The Enerpac P392 Hand Pump, or the P392FP Foot Pump are ideal.

Alternatively, choose the LWC16 Vertical Lifting Wedge, which includes an integrated hand pump.

Applications: Spread, Lift

Type: Spreader
Max Bar: 700
Max PSI: 10000

Product Group: Flange Maintenance Tools
Product Line: Industrial Tools
Series: LW
Stroke Inches: 0.83
Stroke MM: 21
SubTypes: Lifting Wedge

Capacity Imperial Tons: 16
Capacity KN: 157

$4,577.22

PUMP, MULTI FLUID, 1500 PSI

EP MP-110

PUMP, MULTI FLUID, 1500 PSI

$4,258.15

PUMP NPT MANIFOLD KIT

EP MPK2

PUMP NPT MANIFOLD KIT
PE/WE-Series

Type: Service Kit

SubTypes: Manifold Kit

$1,239.55

HYDRAULIC MAINTENANCE SET

EP MS2-10

HYDRAULIC MAINTENANCE SET

$6,355.21

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 3 Cylinders and 53 Attachments

EP MS21020

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 3 Cylinders and 53 Attachments

The MS21020 is our most complete maintenance set that equips you to complete a wide array of maintenance tasks. The assortment of 53 accessories enables you to quickly configure the ideal tool for just about any challenge imaginable.

This set includes three of our most popular hydraulic cylinders: The RC102, RC106, and the RC256. Using these cylinders with attachments will allow you to exert at forces up to 12.5 tons (116kN) and extend up to 6.25" (116mm) - Ideal when you need to push, pull, lift, press, straighten, spread, or clamp.

Also included is the lightweight P392 2-speed hydraulic hand pump, hose, gauge, A92 spreader attachment, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

Applications: Lift, Push, Pull, Press, Spread, Clamp

Type: Cylinder And PumpSet
Max Bar: 350
Max PSI: 5000

Product Group: Cylinders and Jacks, Pumps
Product Line: Industrial Tools
Series: MS
Stroke Inches: 6.25
Stroke MM: 158
SubTypes: Cylinder with Attachments and Hand Pump Set

Set Includes: P392, HC7206, RC102, RC106, RC256, GP10S, GA2, A13, A28, A21, A27, A20, A595, A14, A243, A10, A8, A6, A192, A305, A18, A185, A15, A607, A129, A128, A132, A238, A5, A141, A218, A19, A242, A92, A16, MZ1050, MZ1051, MZ1052, A285, MZ1002, MZ1003, A239, MZ1004, A240, MZ1005, A241, CW350

$12,812.22

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 13 Cylinder Attachments

EP MS220

12.5 Ton, Hydraulic Cylinder and Hand Pump Set with 13 Cylinder Attachments

This hydraulic pump and cylinder set includes a complete assortment of accessories allowing you to quickly configure a unique tool to solve your many difficult maintenance tasks.

The set includes the RC256 Hydraulic Cylinder, which when used with attachments allows you to exert a force of 12.5 tons (116kN) and a stroke of 6.25" (116mm). Ideal when you need to push, pull, lift, press, straighten, or clamp.

Also included is the lightweight P392 2-speed hydraulic hand pump, hose, gauge, lock-on or threaded connectors, and a storage crate.

Safe Operation
When using hydraulic cylinders with maintenance set attachments or components, the maximum system pressure must be limited to half of the rated pressure (5,000 psi / 350 bar). When not using attachments, the tonnage and pressure capacities are double these values.

Only use attachments provided with the set. Using non-Enerpac attachments and longer extension tubes could reduce column strength - potentially creating unsafe conditions.

Applications: Lift, Push, Pull, Press, Spread, Clamp

Type: Cylinder And PumpSet
Max Bar: 350
Max PSI: 5000

Product Group: Cylinders and Jacks, Pumps
Product Line: Industrial Tools
Series: MS
Stroke Inches: 6.25
Stroke MM: 158
SubTypes: Cylinder with Attachments and Hand Pump Set

Set Includes: P392, HC7206, RC256, GP10S, GA2, A28, A27, A595, A243, A607, A238, A218, A242, A239, A240, A241, CW166

$7,159.19

Sequence Valve, 366 in3/min Maximum Oil Flow

EP MVPM5

Sequence Valve, 366 in3/min Maximum Oil Flow

Type: Valve
Max Bar: 350
Max PSI: 5000

Product Group: Valves, Pumps
Product Line: Work Holding Tools
Series: MVP
SubTypes: Sequence Valve

Sequence valves block the oil to a secondary hydraulic circuit until pressure in the primary circuit reaches a preset level. The sequence valves have a built-in check system to allow the oil to flow back without external piping.
Direct accurate pressure setting
Pressure setting between 500-5000 psi for secondary circuit is secured with lock nut
Manifold mounting ports on MVPM5
Manifold O-rings included with MVPM5

$827.07