Hydraullic Units

EP H-9206S

6 HOSE, 3/8 & 1/4 NPT

EP H-9220

20 HOSE, .25 I.D.

EP H-9250

50 HOSE, .25 I.D.

EP HA-7206

6 HOSE W/AH-604, 3/8 NPTF, .25 I.D.

EP HA-9206

6 HOSE W/ AH-604, 3/8 NPTF, .25 I.D.

EP HA-9210

10 HOSE W/ AH-604, 3/8 NPTF .25 I.D.

EP HC7250C

50 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC7320C

HOSE 20FT CH604 +CH604
Thermo-Plastic Hoses (700-Series)

• Type: Hose

• Product Group: Hoses, Pumps

EP HC-9203B

3 HOSE W/ C-604, 3/8 NPTF, .25 I.D.

EP HC-9210B

HOSE 10 FT., 3/8 NPT+C604 .25ID

EP HCA6

6 ft (1,8 m) Industrial Grade High Pressure Hydraulic Hose, 0.25 in (6,4 mm) Internal Diameter
HCA Industrial Grade .25 (6,4 mm) I.D. series hoses are rated at 10,000 psi (700 bar) operating pressure and 20,000 psi (1380 bar) minimum burst pressure. This hoseis the recommended choice for hand pump & cylinder sets, as well as a wide range of other intermittent applications. All hoses with couplers includes CR215 Dust Cap.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: HCA
• SubTypes: Industrial Grade Hose

EP HCL100K

SEAL KIT HCL100
Single-Acting Locknut Cylinders (CLL, HCL-Series and equivalent)

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Seal Kit

EP HCL50008

LOCK NUT HCL 50 TON
Single-Acting Locknut Cylinders (CLL, HCL-Series and equivalent)

• Type: Component

• SubTypes: Lock Nut

EP HCL-508

50 TON LOCKING COLLAR CYLINDERS

EP HCR-1506

CYL DA 150 TON 6 - 150 MM

EP HP-5016

Hollow Threaded Saddle

EP HT1510HR

21,750 psi, 9.84 ft., Hydraulic Tensioner Hose

• Type: Hose
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools, Bolting Tools
• Series: HT
• SubTypes: Tensioner Hose

• 21,750 psi hose
• Includes dust caps
• Can be used for subsea fastening systems
• Hoses can be inter-connected in multi-tool set-ups using nipples, couplers, T-pieces and Y-Pipe assemblies.

• Set Includes: BH150, BR150
• Accessories: BW150AW, B150B, BR150B, BH150B

EP IPA-2520

IPH025S14-1 W/ XA12

EP IPE-20065

200 TON H-FRAME PRESS

EP IPH1240

10 Ton, H-Frame Hydraulic Press with RC1010 Single-Acting Cylinder and P392 Hand Pump

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, P392, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP JHA-73

7 TON ALUMINUM HAND JACK

EP JJ2510C

Super Jacks, 25 ton (222,4 kN) Capacity, 5 in (127 mm) Stroke, Steel Jack Housing

• Ratcheting screw jack design.
• Holds the load indefinitely, and will not creep down.
• Positive shoulder stop for safety.
• Available with aluminum or ductile iron housing.
• Ball bearings for smooth operation and low handle effort.
• Raise or lower the load precisely with the reversal ratchet socket with quick spin handle.
• CE Compliant - Our Jack design specifications meet or exceed ANSI /ASME B30.1 Safety Standards.

• Type: Jack

• Product Line: Mechanical Tools
• Series: JJ
• Stroke Inches: 5
• Stroke MM: 127
• SubTypes: Super Jacks

• Capacity Imperial Tons: 25
• Capacity KN: 222,4

• Accessories: SLB36

EP K1044

RING
Wedgie and Spread Cylinders (A and WR-Series)

• Type: Service Kit

• SubTypes: Ring

EP K53028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw

EP L661028

SCREW
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Screw