Hydraullic Units

EP HB7206QB

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC-7220

EP HC9206

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo

EP HC9210C

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38 inch (6.4 and 9.7mm). Connection types available are 1/4 inch NPTF, 3/8 inch NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little memory, is the best choice for long hose runs

EP HCL-1006

EP HCL-504

EP HCR2006

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.

Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCR
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Cylinder

• Double-acting for fast and controlled advance and retract
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCR200K1
• Accessories: CATS200

EP HCR-2008

EP HCRL1006

HCRL Series High Tonnage Hydraulic Cylinders feature a lock nut to provide mechanical load holding for extended periods of time. These double-acting cylinders use hydraulic force to deliver a faster and more controlled return of the plunger than load/gravity return equivalents. Tilt saddles are provided as standard on all HCRL cylinders which allow up to 5 degrees of load misalignment.

All Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCRL
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Lock Nut Cylinder

• Ensures safety by providing mechanical load holding for extended periods
• Low friction lock nut spins easily, saving time and effort
• Double acting hydraulic return for fast advance and retract
• Integrated tilt saddle allows up to 5 degrees of misalignment
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Stop-ring prevents plunger blow-out
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes and collar thread included as standard.
• HCRL-Series Cylinders are available with up to 1000-ton capacity and 24-inch stroke upon request.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Accessories: CHM6

EP HF102

The Enerpac HF-series Hydraulic Oil is specially formulated for powered hydraulic pumps. The HF-series oil contains anti-sludge, anti-rust, and anti-foam additives for overall superior performance. The HF-series hydraulic oil prevents cavitation and offers maximum volumetric efficiency and maximum heat transfer.

The HF-series oil is not for use in hand pumps. Use the Enerpac LX-Series Oil for hand powered pumps.

Offered in 1 quart, 1 gallon, 5 gallon and 55-gallon sizes. The HF-series hydraulic oil has a viscosity index of 100 min.

• Type: Hydraulic Oil

• Product Group: Pumps
• Product Line: Industrial Tools, Work Holding Tools, Bolting Tools
• Series: HF
• SubTypes: Oil

• Specially formulated for power pumps
  • maximum volumetric efficiency
  • maximum heat transfer
  • prevents cavitation
  • anti-sludge, anti-rust, anti-foam additives
• Maximum film protective lubricity
  • anti-oxidation additives
• High viscosity index ensures maximum lubricity over a wide range of operation temperatures.

EP HP2006

• Type: Puller Accessory

• Product Group: Pullers

EP HP2031

• Type: Puller Accessory

• Product Group: Pullers

EP HP3015

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HP
• SubTypes: Threaded Hollow Saddle

EP HPT1500

The HPT1500 is a manually operated high-pressure hydraulic tensioner pump in a convenient portable format. With no need for trailing power cords or air hoses, the HPT1500 is ideal for bolt tensioning applications where there is no power source available.

This high-pressure hand pump creates a maximum working pressure of 21,750 psi (1500 bar), and the robust, but lightweight construction provides greater portability than powered tensioner pumps.

To minimize cycle times, the two-speed operation displaces a large volume of oil per stroke at the first stage, and the included pressure gauge keeps you fully informed throughout the process.

Important: These pumps operate at ultra high-pressure, use only the specified fittings and hoses designed for these pressures.

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Industrial Tools, Bolting Tools
• Series: HPT
• SubTypes: Hand Pump - Tensioning Pump

• The Enerpac HPT high-pressure Hand Pump is ideally suited for use with hydraulic bolt tensioning tools and hydraulic nuts
• Lightweight and portable high-pressure hand pump
• Two-speed operation displaces a larger volume of oil per stroke, reducing cycle times for many testing applications
• Includes a gauge and coupler for direct connection to GT-Series bolting tools
• Integrated relief valve set at 21,750 psi
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures

EP IC-50

EP IC-51

EP IPA5073

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZA4408MX, GF50P, HC9306, GA2
• Accessories: PK1002, A150, IPL100

EP IPE1215

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, ZE2208MB, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPH100D13-2

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100

• Set Includes: RR10013, GA3, GF871P, HC9306

EP JBI25

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP L119110SR

• Type: Service Kit

• SubTypes: Spring Kit

EP L748900SR

• Type: ERP

• SubTypes: Saddle Kit

EP LGH314

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 14
• Capacity KN: 125

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: RWH121, FZ1065, LGH14K6

EP LGHMS324H

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 24
• Capacity KN: 215

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH324, RCH202, HP2015, LGH24K6, BHP272, BHP292, BHP280, P392, GA45GC, HC7206C

EP LH-2506