Hose, Valves, Fittings
HOSE, COUPLED, 10 FT
GG 217382
HOSE, COUPLED, 10 FT
Coupled Fluid Hose; 3/4 npt; 3/4 in ID, 10 ft; Nylon 
1/4 Male Run (Street) Tee, Heavy Forged
B 127-04-H
1/4 Male Run (Street) Tee, Heavy Forged
Fitting, Coupler (Twist Lock)
GG 223628
FITTING, COUPLER (TWIST LOCK)
Graco 223628 1.3 oz Twist Lock Coupler Stem 3/8 npsm, 300 psi maximum inbound fluid pressure
Stainless steel construction
Quickly change between guns, regulators, and lines to reduce setup, changeover, and maintenance time
Don't flush through guns tips, disconnect and flush through quick connects. Reduce flushing time and avoid premature tip wear.
Provide flexibility for operators, especially those that own or maintain their own guns. Promote daily maintenance.
Compatible with Graco Gun Regulators and Restrictors
Quick couplers automatically seal once disconnected
Compression Fitting 8mm x 1/4 npt 316 SS
LG 1805-08-14
Compression Fitting 8mm x 1/4 npt 316 SS 3/8 Hose Barb x 1/4 NPT Male, 304SS
SS KF-PS-06-04
3/8 Hose Barb x 1/4 NPT Male, 304SS
Hose Reel 300psi, 3/8 x 50, Air/Water
RC 5650 OLP
Hose Reel 300psi, 3/8 x 50, Air/Water
3/8 NPTF(M) x 3/8 NPSM(F) Swivel Elbow
S 1501-06-06
3/8 NPTF(M) x 3/8 NPSM(F) Swivel Elbow
Elbow, 5/32 Tube x 10/32 UNF Threads
SMC KQ2L03-32A
Elbow, 5/32 Tube x 10/32 UNF Threads 
3/4 x 1/4 Hex Bushing, Cast Bronze
B 110-12-04-C
3/4 x 1/4 Hex Bushing, Cast Bronze
Cc20 Hood Dupont Tychem 2000 Single Bib Adjustable Suspension Clamp Connection
BU 20TJ
Cc20 Hood Dupont Tychem 2000 Single Bib Adjustable Suspension Clamp Connection
PIPE, NIPPLE
GG 156849
PIPE, NIPPLE
Hose Fitting, 3/8 in x 3/8 in Connect two 3/8 inch diameter hoses together with this hose fitting.
Mini Flow Control, 1/4 OD x 1/8 NPT(M)
LG 7665-56-11
Mini Flow Control, 1/4 OD x 1/8 NPT(M)
3/16 ID x 25Ft Airless Fluid Hose Yellow
EF PA13-25FBE
3/16 ID x 25Ft Airless Fluid Hose Yellow
Reactor Heated Hose, Whip, 1/4ID, 3500PSI, 10ft
GG 25P772
Reactor Heated Hose, Whip, 1/4ID, 3500PSI, 10ft
Graco 25P772 10 ft x 1/4 in High Flex Whip Hose, 3500 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2
Graco’s Improved Flex heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- Improved Flex design, making it easier to spray in tight areas
- 20% Lighter than previous whip hose
- Includes 18&Prime, of insulated, non-heated section near gun
- Includes reliable Xtreme Wrap scuff guard