Hose, Valves, Fittings

EF PA16-3-FFSS

EF PA16-6-FFSS

EF PA18-6-FBE

GG 104893

GG 122969

GG 156823

FITTING, UNION, SWIVEL

Graco 156823 Union, 1/4 in x 1/4 in

1/4 inch npt (m) x 1/4 inch npsm (f) union with a maximum working pressure of 5000 psi.

• Model: Graco

• End A Inlet Size (in): 0.25
• End A Inlet Size (mm): 6.35
• End A Inlet Thread Gender: Male
• End A Inlet Thread Type: NPT
• End B Inlet Size (in): 0.25
• End B Inlet Size (mm): 6.35
• End B Inlet Thread Gender: Female
• End B Inlet Thread Type: NPSM

• For Use With: Airless Spray Guns

• Material: Carbon Steel

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

GG 157350

ADAPTER, 3/8 NPT X 1/4 NPT

Graco 157350 Hose Fitting, 1/4 in x 3/8 in

Connect a 1/4 inch diameter hose to a 3/8 inch diameter hose with this fitting. When coupling hoses together, connect the larger diameter hose to the sprayer and the small diameter hose to the gun for maximum pressure when spraying.

• Model: Graco

• Connection Type: Threaded

• Material: Steel

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

GG 158491

FITTING, NIPPLE, 1/2NPT

Graco 158491 Hose Fitting, 1/2 in x 1/2 in

Connect two 1/2 inch diameter hoses together with this hose fitting.

• Connection Type: Threaded

• Maximum Working Pressure (bar): 462
• Maximum Working Pressure (kPa): 46200
• Maximum Working Pressure (psi): 6700

GG 176463

GG 181795

GG 207123

GG 220372

GG 237529

VALVE, BALL

Graco 237529 Low Pressure Ball Valve compatible with stainless steel, catalyst and waterborne materials, 1/4 in. npt(m) x 3/8 in. npsm(m)

Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.

• Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
• Many different connection options to meet your specific needs

• Handle Type: Lever

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 35
• Maximum Working Pressure (kPa): 3500
• Maximum Working Pressure (MPa): 3.5
• Maximum Working Pressure (psi): 500

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Gender: Male
• Outlet Thread Type: NPSM

GG 24D123

HOSE,DUAL,1:1,3/8X3/8,50',CS

Graco 24D123 Carbon Steel Dual Heat Zone Hose Bundle with Air Hose

GG 24F165

KIT, HOSE, FLUID, 25FT, CS

Graco 24F165 Fluid Hose, 1/8" ID, 25 ft (7.5 m), plated steel

GG 24Y807

GG 25P770

REACTOR HEATED HOSE, WHIP, 1/4ID, 2000PSI, 10FT

Graco 25P770 10 ft x 1/4 in High Flex Whip Hose, 2000 psi, Without Cable, Xtreme-Wrap, Reactor 1 & 2

The whip hose is designed to be lighter weight and offers improved flexibility using materials that are more durable and have higher temperature ratings.This whip hose also includes the newest electrical configuration that removes all electrical connections from near the gun.

• Light Weight Design

  20% lighter weight than traditional whip hose

• Stainless Steel Braiding
• High Temperature Hose Core and Silicone Wire Protection
• Includes reliable Xtreme Wrap scuff guard

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1 & 2

• Connection Type: Male x Female

• Hose Diameter (in): 1/4"
• Hose Diameter (mm): 6.35
• Hose Heating Type: External Heated
• Hose Length (ft): 10
• Hose Length (m): 3

• Inside Diameter (in): 1/4

• Material: PTFE

• Maximum Temperature ( degree C): 82
• Maximum Temperature ( degree F): 180

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

HL CLA-6SS

HL CLA-8SS

HL CMC6-4NSS

HL CTA-10SS

HN 4400

HN S21

HO 0738-SG

HO 1414-BT-SS-T