Hose, Valves, Fittings
3/8 Single Hex Coupling, Medium Barstock
B 103-06-M
3/8 Single Hex Coupling, Medium Barstock
1 x 1/2 Hex Bushing, Cast Bronze
B 110-16-08-C
1 x 1/2 Hex Bushing, Cast Bronze
1/4 x 1/8 Reducing Coupling, Heavy Brstk
B 119-04-02-H
1/4 x 1/8 Reducing Coupling, Heavy Brstk
3/8 x 1/4 Reducing Coupling, Heavy Brstk
B 119-06-04-H
3/8 x 1/4 Reducing Coupling, Heavy Brstk
Reel, 1/2 ID Red Air Hose, EPDM, 250 psi 300ft
BB 71-13000-RL
Reel, 1/2 ID Red Air Hose, EPDM, 250 psi 300ft
1/8 ID x 15 Ft Airless Fluid Hose Yellow
EF PA12-15FBE
1/8 ID x 15 Ft Airless Fluid Hose Yellow
Hose w/ Spring Guards to the Ends
EF TC14-50FFSS2S
Hose w/ Spring Guards to the Ends
FITTING, NIPPLE, SHORT
GG 156971
FITTING, NIPPLE, SHORT
Graco 156971 Hose Fitting, 1/4 in x 1/4 in
Connect two 1/4 inch diameter hoses together with this hose fitting.
- Model: Graco
- Connection Type: Threaded
- For Use With: Pipe, DuraFlex hoses 1/4 in.
- Material: Carbon Steel
VALVE, BALL
GG 237531
VALVE, BALL
Graco 237531 Low Pressure Ball Valve compatible with stainless steel, catalyst and waterborne materials, 3/8 in. npt(m) x 3/8 in. npt(m)
Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.
- Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
- Many different connection options to meet your specific needs
- Handle Type: Lever
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Gender: Male
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 35
- Maximum Working Pressure (kPa): 3500
- Maximum Working Pressure (MPa): 3.5
- Maximum Working Pressure (psi): 500
- Outlet Size (cm): 0.9525
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Gender: Male
- Outlet Thread Type: NPT
HOSE, CPLD, 1/4" X 3', 4000 WPR
GG 277249
HOSE, CPLD, 1/4" X 3', 4000 WPR
Graco 277249 BlueMax II HP Airless Whip Hose, 1/4 in x 3 ft (0.9 m), 4000 psi
The BlueMax II HP Whip Hose provides more flexibility and increased operator control at the gun. This BlueMax II Whip Hose has a 1/4 inch diameter and is 3 feet long and rated for up to 4000 psi.
Application: For high-pressure spraying applications- Lighter Weight
Over 10% lighter weight and increased hose flexibility improves under pressure
- Highest Safety Standards
Conductive core meets the highest worldwide safety standards unlike competitive ground wire hose designs
- Minimal Hose Coil Memory
BlueMax II Hose has superior flexibility and reduced coil memory providing ease of use during coiling and uncoiling
- Model: BlueMax II
- Series: Whip Hose
- Hose Diameter (in): 1/4
- Hose Length (ft): 3
- Hose Length (m): 0.9150
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 2800
- Maximum Working Pressure (psi): 4000
Straight Union, 8mm OD, N-P Brass
LG 3606-08-00
Straight Union, 8mm OD, N-P Brass
Ball Valve, Inline, 20mm Tube to Tube
PV PPS1 RSI20
Ball Valve, Inline, 20mm Tube to Tube
1/4 Poly Tube x 1/4 NPT(M) Elbow
B 269-P-04-04
1/4 Poly Tube x 1/4 NPT(M) Elbow