Airpower | Grinders

Grindlazer Hose, Hydraulic 20in

GG 18B301

Grindlazer Hose, Hydraulic 20In

$91.75

Grindlazer Hose, Hydrualic 15in

GG 18B312

Grindlazer Hose, Hydrualic 15In

$72.75

Grindlazer Hose, Hydrualic 8in

GG 18B313

Grindlazer Hose, Hydrualic 8In

$77.50

GG 17X693

Grindlazer Hose, Vac, Short

$145.50

GG 17X704

Grindlazer Hose, Vac, Long

$337.00

6PC 2" & 3" SURFACE CONDITIONING KIT

IR 23A-VARBR-6

6PC 2" & 3" SURFACE CONDITIONING KIT

$56.00

GRINDLAZER SYSTEM, HP DC1538 G DCS

GG 25P474

GRINDLAZER SYSTEM, HP DC1538 G DCS

GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, High-Speed Pulley Kit The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

Adaptable for leveling, grooving, scarifying, and stripping coatings
Up to 16 inch removal path
Wide variety of cutters available
High-speed pulley kit for diamond and PCD cutters
Quick-change side plate for easier drum removal

Depth Control System

Eliminate Measuring & Guesswork
Quickly and precisely adjust the cutter depth with the push of a button
Achieve accurate cut depth for leveling, grooving, and inlay
Eliminate damage due to “dropped drums”

DCS Controller

Total Operator Control
Easy adjustment via control panel buttons
Set “zero point” where the cutter meets the surface
Adjust cut depth in 0.01 inch increments
Displays “active depth” from zero point
English and metric units
Robust design stands up to harsh job site environments
Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

All-steel chassis
Low-vibration design
Long-life bearings

Powered by a 38 HP Kohler® EFI Gasoline Engine Dust Removal

Dust port for connecting to LazerVac vacuum systems

$47,840.00

GRINDLAZER SYSTEM, HP DC1525 P DCS

GG 25P475

GRINDLAZER SYSTEM, HP DC1525 P DCS

GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, High-Speed Pulley Kit The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

Adaptable for leveling, grooving, scarifying, and stripping coatings
Up to 16 inch removal path
Wide variety of cutters available
High-speed pulley kit for diamond and PCD cutters
Quick-change side plate for easier drum removal

Depth Control System

Eliminate Measuring & Guesswork
Quickly and precisely adjust the cutter depth with the push of a button
Achieve accurate cut depth for leveling, grooving, and inlay
Eliminate damage due to “dropped drums”

DCS Controller

Total Operator Control
Easy adjustment via control panel buttons
Set “zero point” where the cutter meets the surface
Adjust cut depth in 0.01 inch increments
Displays “active depth” from zero point
English and metric units
Robust design stands up to harsh job site environments
Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

All-steel chassis
Low-vibration design
Long-life bearings

Powered by 25 HP Kohler® EFI Propane Engine Dust Removal

Dust port for connecting to LazerVac vacuum systems

$47,840.00

GRINDLAZER SYSTEM, HP DC1520 E DCS

GG 25P476

GRINDLAZER SYSTEM, HP DC1520 E DCS

GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

Adaptable for leveling, grooving, scarifying, and stripping coatings
Up to 16 inch removal path
Wide variety of cutters available
High-speed pulley kit for diamond and PCD cutters
Quick-change side plate for easier drum removal

Depth Control System

Eliminate Measuring & Guesswork
Quickly and precisely adjust the cutter depth with the push of a button
Achieve accurate cut depth for leveling, grooving, and inlay
Eliminate damage due to “dropped drums”

DCS Controller

Total Operator Control
Easy adjustment via control panel buttons
Set “zero point” where the cutter meets the surface
Adjust cut depth in 0.01 inch increments
Displays “active depth” from zero point
English and metric units
Robust design stands up to harsh job site environments
Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

All-steel chassis
Low-vibration design
Long-life bearings

Powered by 20 HP Motor, 480V, 60Hz, 3ph Dust Removal

Dust port for connecting to LazerVac vacuum systems

$47,840.00

Grindlazer System, Graco Fs351 E Dcs 380V/50

GG 25P783

GRINDLAZER SYSTEM, GRACO FS351 E DCS 380V/50

Graco 25P783 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit

The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.

Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.

Do-It-All Solution
- Adaptable for leveling, grooving, scarifying, and stripping coatings
- Up to 16 inch removal path
- Wide variety of cutters available
- High-speed pulley kit for diamond and PCD cutters
- Quick-change side plate for easier drum removal
Depth Control System
- Eliminate Measuring & Guesswork
- Quickly and precisely adjust the cutter depth with the push of a button
- Achieve accurate cut depth for leveling, grooving, and inlay
- Eliminate damage due to â€œdropped drumsâ€
DCS Controller
- Total Operator Control
- Easy adjustment via control panel buttons
- Set â€œzero pointâ€ where the cutter meets the surface
- Adjust cut depth in 0.01 inch increments
- Displays â€œactive depthâ€ from zero point
- English and metric units
- Robust design stands up to harsh job site environments
- Electronic components are protected against dust, debris, water, and vibration
Designed for the Toughest Jobs
- All-steel chassis
- Low-vibration design
- Long-life bearings
Powered by 20 HP Motor, 380V, 50Hz, 3ph
Dust Removal
- Dust port for connecting to LazerVac vacuum systems