Grinders

GG 19B304

Grindlazer Pump, Pc Series

GG 19B431

Grindlazer System, Drum Assembly 20In Housing

GG 19B467

Grindlazer Hose, Hydrauilic, 3/8In, 3000 Psi

GG 17X156

Grindlazer Hose, Vac

GG 18B126

Grindlazer Hose, 4000 Psi Hose 3/4In X 14In

GG 18B127

Grindlazer Hose, 4000Psi 3/4In X 45In

GG 18B128

Grindlazer Hose, 4000Psi 3/4In X 60In

GG 18B135

Grindlazer Control, Flow Control 50Gpm

GG 18B136

Grindlazer Valve, Needle Valve 30Gpm

GG 18B137

Grindlazer Valve, Check Valve

GG 18B143

Grindlazer Valve, Tamper Proof Relief Valve

GG 18B189

Grindlazer Valve, Cushion Relief High Flow

GG 18B190

Grindlazer Valve, Cushion Relief Low Flow

GG 18B299

Grindlazer Hose, Hydraulic 25In

GG 18B300

Grindlazer Hose, Hydraulic 12In

GG 18B301

Grindlazer Hose, Hydraulic 20In

GG 18B312

Grindlazer Hose, Hydrualic 15In

GG 18B313

Grindlazer Hose, Hydrualic 8In

GG 17X693

Grindlazer Hose, Vac, Short

GG 17X704

Grindlazer Hose, Vac, Long

IR 23A-VARBR-6

6PC 2" & 3" SURFACE CONDITIONING KIT

GG 25P474

GRINDLAZER SYSTEM, HP DC1538 G DCS

GrindLazer HP DC1538 G DCS Self-Propelled Gas-Powered Scarifier, High-Speed Pulley Kit The DC1538 G DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by a 38 HP Kohler® EFI Gasoline Engine Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P475

GRINDLAZER SYSTEM, HP DC1525 P DCS

GrindLazer HP DC1525 P DCS Self-Propelled Propane-Powered Scarifier, High-Speed Pulley Kit The DC1525 P DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It's capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by 25 HP Kohler® EFI Propane Engine Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P476

GRINDLAZER SYSTEM, HP DC1520 E DCS

GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping. All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters. Do-It-All Solution

• Adaptable for leveling, grooving, scarifying, and stripping coatings
• Up to 16 inch removal path
• Wide variety of cutters available
• High-speed pulley kit for diamond and PCD cutters
• Quick-change side plate for easier drum removal

Depth Control System

• Eliminate Measuring & Guesswork
• Quickly and precisely adjust the cutter depth with the push of a button
• Achieve accurate cut depth for leveling, grooving, and inlay
• Eliminate damage due to “dropped drums”

DCS Controller

• Total Operator Control
• Easy adjustment via control panel buttons
• Set “zero point” where the cutter meets the surface
• Adjust cut depth in 0.01 inch increments
• Displays “active depth” from zero point
• English and metric units
• Robust design stands up to harsh job site environments
• Electronic components are protected against dust, debris, water, and vibration

Self-Propelled

• Variable-speed hydrostatic drive allows user to dial in the speed for each application

Designed for the Toughest Jobs

• All-steel chassis
• Low-vibration design
• Long-life bearings

Powered by 20 HP Motor, 480V, 60Hz, 3ph Dust Removal

• Dust port for connecting to LazerVac vacuum systems

GG 25P783

GRINDLAZER SYSTEM, GRACO FS351 E DCS 380V/50

Graco 25P783 GrindLazer HP DC1520 E DCS Self-Propelled Electric Scarifier, High-Speed Pulley Kit

The DC1520 E DCS heavy-duty, self-propelled drum scarifier is designed to tackle the most demanding removal and surface preparation jobs. It is capable of removing a path up to 16 inches wide and features Graco's electronic DCS Depth Control System to quickly adjust cut depth without stopping.

Application: All GrindLazer DC15 DCS models come with either a low or high-speed pulley kit installed. Choose a model with the high-speed pulley kit if operating with diamond or PCD cutters. Choose a model with the low-speed pulley kit if using with carbide cutters.

• Do-It-All Solution
  
  • Adaptable for leveling, grooving, scarifying, and stripping coatings
  • Up to 16 inch removal path
  • Wide variety of cutters available
  • High-speed pulley kit for diamond and PCD cutters
  • Quick-change side plate for easier drum removal
• Depth Control System
  
  • Eliminate Measuring & Guesswork
  • Quickly and precisely adjust the cutter depth with the push of a button
  • Achieve accurate cut depth for leveling, grooving, and inlay
  • Eliminate damage due to “dropped drums”
• DCS Controller
  
  • Total Operator Control
  • Easy adjustment via control panel buttons
  • Set “zero point” where the cutter meets the surface
  • Adjust cut depth in 0.01 inch increments
  • Displays “active depth” from zero point
  • English and metric units
  • Robust design stands up to harsh job site environments
  • Electronic components are protected against dust, debris, water, and vibration
• Designed for the Toughest Jobs
  
  • All-steel chassis
  • Low-vibration design
  • Long-life bearings
• Powered by 20 HP Motor, 380V, 50Hz, 3ph
• Dust Removal
  
  • Dust port for connecting to LazerVac vacuum systems

• Model: GrindLazer
• Series: High Production Series
• Product Series: High Production

• Cutter Drum Diameter (in): 10
• Cutter Type: Drum

• Maximum Cut Rate (ft2/hr): 3500
• Maximum Cut Width (cm): 41
• Maximum Cut Width (in): 16
• Maximum Cut Width (mm): 406