Airpower | Grinders

IR MG1-123

REAR EXHAUST DIFFUSER

$15.00

Grinder, RA, 12K, 1.7Hp, 5/8 - 11, 5in Guard

CL C3120A5-58OH

GRINDER, RA,12K,1.7HP,5/8" -11,5" GUARD,OH

12,000 - 13500 RPM 1.7 hp (1.25 kW)

High-performance 1.7Hp motor delivers maximum power

Quick change spindle lock for fast and easy abrasive changes

Quieter operation with rear exhaust overhose standard

Ergonomic, anti-vibration handle for increased comfort and less operator fatigue

Dual-layer, high-impact composite housing for extreme durability

Air Inlet Size: 3/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Weight (lbs): 4.05 lb

$882.70

Grinder, RA, 12K, 1.7Hp, 5/8 - 11, 4.5in Guard

CL C3120A45-58OH

GRINDER, RA,12K,1.7HP,5/8" -11,4.5" GUARD

12,000 - 13500 RPM 1.7 hp (1.25 kW)

High-performance 1.7Hp motor delivers maximum power

Quick change spindle lock for fast and easy abrasive changes

Quieter operation with rear exhaust overhose standard

Ergonomic, anti-vibration handle for increased comfort and less operator fatigue

Dual-layer, high-impact composite housing for extreme durability

Air Inlet Size: 3/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Weight (lbs): 3.98 lb

$882.70

CL C3135A4-38OH

GRINDER,RA,13.5K,1.7HP,3/8" -24,4" GUARD

12,000 - 13500 RPM 1.7 hp (1.25 kW)

High-performance 1.7Hp motor delivers maximum power

Quick change spindle lock for fast and easy abrasive changes

Quieter operation with rear exhaust overhose standard

Ergonomic, anti-vibration handle for increased comfort and less operator fatigue

Dual-layer, high-impact composite housing for extreme durability

Air Inlet Size: 3/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Weight (lbs): 3.78 lb

$860.00

CL 10LF281-36OH

RA SNDR/GRD,RE,20K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH Option Supplied with 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Type Housing: Aluminum
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$971.80

Die Grinder, Straight 1/4

CL 10L2580-01

GRINDER, RE, 23K, 1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Durable aluminum housing - Ideal for die/mold and deburring work

Front and rear exhaust models available

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.32 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$731.00

Dotco 22,000 rpm Rear Exhaust In Line Grinder

CL 12L2674-2A

.83 MULTI EXT,RE,18K,1/4" E300

18,000 RPM 0.9 hp (0.67 kW)

Can be customized with multiple extensions for access to the most far-reaching areas

Multiple industrial bearings provides optimal balance and power transfer

Designed to work comfortably with the operator

Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 4.19 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration

$1,573.80

.83 Multi Ext, RE 18K Pencil Grinder

CL 12L2674-3A

.83 MULTI EXT,RE,18K,1/4" E300

18,000 RPM 0.9 hp (0.67 kW)

Can be customized with multiple extensions for access to the most far-reaching areas

Multiple industrial bearings provides optimal balance and power transfer

Designed to work comfortably with the operator

Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 5.3 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration

$1,900.60

Pencil Grinder

CL 12R0410-43

GRD,PENCIL,ERGO,60K,3MM COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$557.28

14.5 Extension Inline Grinder

CL 12S2674-2C

.83 MULTI EXT,RE,18K,3/8-24E

18,000 RPM 0.9 hp (0.67 kW)

Can be customized with multiple extensions for access to the most far-reaching areas

Multiple industrial bearings provides optimal balance and power transfer

Designed to work comfortably with the operator

Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 4.19 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration

$1,487.80

29" Extension Grinder, 18000 Rpm, 3/8"

CL 12S2674-4C

.83 MULTI EXT,RE,18K,3/8-24E

18,000 RPM 0.9 hp (0.67 kW)

Can be customized with multiple extensions for access to the most far-reaching areas

Multiple industrial bearings provides optimal balance and power transfer

Designed to work comfortably with the operator

Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 6.6 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration

$2,184.40

.4 Hp 3 Inch Ext. Die Grinder

DY 43500

.4 hp 3in (76 mm) Extension Die Grinder

25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$748.80

.4 Hp 3In Ext. Die Grinder, 25,000 rpm, Rear Exh., 1/4 And 6 mm Collets

DY 43505

.4 hp 3in (76 mm) Extension Die Grinder

25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$758.70

6in Ext. Die Grinder, 25K Rpm

DY 43510

.4 hp 6in (152 mm) Extension Die Grinder

25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 6in (152 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$811.80

6in Extention. Die Grinder, 25, 000 Rpm

DY 43515

.4 hp 6in (152 mm) Extension Die Grinder

25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!

Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$820.80

.4 Hp Right Angle Die Grinder, 15,000 rpm, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet

DY 46001

.4 HP Right Angle Die Grinder, 15,000rpm, Spiral-Geared, Extended Rear Exhaust, 1/4 Collet

$812.70

.4 Hp Right Angle Die Grinder, 12,000 rpm

DY 46000

.4 hp Right Angle Die Grinder

12,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 12000.0
Motor RPM: 12,000

$812.70

.4 Hp Right Angle Die Grinder, 20,000 rpm

DY 46002

.4 hp Right Angle Die Grinder

20,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 20000.0
Motor RPM: 20,000

$812.70

1/4in Die Grinder, 3200 RPM, .4 HP

DY 47201

.4 hp Straight-Line Die Grinder

3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

HP: 0.4
Max. RPM: 3200.0
Motor RPM: 3,200

$681.30

.4 Hp Right Angle Die Grinder, 12,000 rpm, 1/4In And 6 mm Collets

DY 47800

.4 hp Right Angle Die Grinder

12,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 12000.0
Motor RPM: 12,000

$787.50

Grinder, Angle Die

DY 47802

.4 hp Right Angle Die Grinder

20,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 20000.0
Motor RPM: 20,000

$787.50

.4 hp Right Angle Die Grinder

DY 47801

.4 hp Right Angle Die Grinder

15,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 15000.0
Motor RPM: 15,000

$787.50

.4hp 7 Degree Offset Die Ginder

DY 48205

.4 hp 7 Degree Offset Die Grinder

25,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets

One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$531.90

.4 hp Straight-Line Die Grinder

DY 48201

.4 hp Straight-Line Die Grinder

25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler

.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!

Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25,000

$473.40

R/A .4 HP 12, 000 RPM Grinder

DY 48315

.4 hp Right Angle Die Grinder

12,000 RPM, Spiral-Geared, Rear Exhaust, 1/4in Collet

All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.

Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.

HP: 0.4
Max. RPM: 12000.0
Motor RPM: 12,000

$800.10